Page 1
COMPACTVIEW CLAN
USER MANUAL
X15-I X15-E
X30-I X30-E
SX15-I SX15-E
SX30-I
© 2002 3D Perception AS All rights reserved.
The copyright of this document is the property of 3D Perception AS. The document is supplied on the
express terms that it is to be treated as confidential. No part of this document may be reproduced or
transmitted in any form or by any means, electronic or mechanical for any purpose, without the
express written permission of 3D Perception AS. The information in this document is subject to
change without notice and is provided ‘AS IS’.
SX30-E
Page 2
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
DOCUMENT STATUS
Revision Month Year Paragraph(s) Prepared by Description of
Change
1 December 2002 All A F Rotheram
H Andersen
2 January 2003 All A F Rotheram Customise for first print
3 May 2004 13 A F Rotheram Ceiling mount flanges
Initial release
ii
Page 3
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
3D Perception COMPACTVIEW CLAN Projector
and Accessories
OMPACTVIEW CLAN Projector Remote Control and batteries
C
Cables
VGA male Blue - VGA male Blue, 2m
DVI-I male White - DVI–I male White, 2m
A/V Cable 3 x Phono – Phono + 3,3mm stereo jack, 2m
S-Video Mini DIN 4 pin male - Mini DIN 4 pin male, 2m
Sound Cable 3,5mm stereo jack - 3,5mm stereo jack, 2m
USB A – USB B, 2m
Communication Cable 6’ spiral with RJ12 connectors
Power cord, 3m (European)
Power cord, 3m (US)
iii
Page 4
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
ABLE OF CONTENTS
T
1. B
EFORE YOU START.................................................................................................................1
1.1 Accessories...................................................................................................................1
1.2 Cables ...........................................................................................................................1
1.3 Other accessories..........................................................................................................1
2. I
NTRODUCTION........................................................................................................................2
3. S
AFETY....................................................................................................................................3
3.1 Safety............................................................................................................................3
3.2 Safety Instructions........................................................................................................3
4. B
5. O
6. K
7. S
EFORE SET-UP AND USE ........................................................................................................4
VERVIEW...............................................................................................................................5
EYPAD...................................................................................................................................6
TATUS....................................................................................................................................7
8. R
9. C
10. S
EMOTE CONTROL ..................................................................................................................8
ONNECTOR PANEL.................................................................................................................9
ET-UP...................................................................................................................................10
10.1 Set-up computer..........................................................................................................10
10.2 Set-up Video...............................................................................................................11
11. GCM
- GEOMETRY CORRECTION MODULE ...........................................................................12
11.1 Connecting multiple projectors ..................................................................................12
12. F
OCUS AND ZOOM .................................................................................................................13
12.1 Focus...........................................................................................................................13
12.2 Zoom...........................................................................................................................13
iv
Page 5
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
13. M
OUNTING THE PROJECTOR ..................................................................................................14
13.1 To a Ceiling Mount.....................................................................................................14
13.2 To a Tabletop..............................................................................................................15
14. U
15. M
SING THE PROJECTOR ..........................................................................................................16
ENU SYSTEM ......................................................................................................................17
15.1 Picture Sub-menu .......................................................................................................18
15.2 Advanced Sub-menu...................................................................................................19
15.3 Audio Sub-menu.........................................................................................................20
15.4 Set-up Sub-menu ........................................................................................................21
15.5 Utilities Sub-menu......................................................................................................22
16. M
17. L
AINTENANCE......................................................................................................................23
AMP REPLACEMENT ............................................................................................................24
17.1 Remove old lamp........................................................................................................24
17.2 Insert New Lamp........................................................................................................25
18. S
19. T
ERVICE INFORMATION .........................................................................................................26
ECHNICAL DATA..................................................................................................................27
19.1 General........................................................................................................................27
19.2 Optics..........................................................................................................................27
19.3 Video ..........................................................................................................................27
20. C
OVERS.................................................................................................................................28
20.1 Cable cover.................................................................................................................28
20.2 Airflow cover..............................................................................................................28
21. L
22. C
IMITED WARRANTY, ‘FCC STATEMENT’ AND ‘TRADEMARKS COPYRIGHT’........................29
ONTACT US..........................................................................................................................31
v
Page 6
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
1. BEFORE YOU START
Thank you for choosing a 3D Perception COMPACTVIEW CLAN projector
1.1 Accessories
Please take a few minutes to ensure that your COMPACTVIEW CLAN projector pack contains all
the necessary parts as listed on the Accessories Page.
1.2 Cables
Please take a few minutes to make sure that your COMPACTVIEW CLAN projector pack contains
all the necessary cables, as listed on the Accessories Page.
1.3 Other accessories
Please refer to our website at www.3d-perception.com
1
Page 7
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
2. INTRODUCTION
The COMPACTVIEW CLAN of projectors are the ultimate in high-resolution projectors when
projection on to flat, curved or double curved screens with multiple projectors is the requirement.
The C
OMPACTVIEW CLAN of projectors are compatible with most data and video sources, both
analogue and digital, and provide the user with outstanding features such as:
• High resolution
• High brightness
• High contrast
• Geometry correction functionality
• Edge blending functionality
• Compact, low weight
• Low noise
• Single Chip DLP technology
• Desktop and ceiling-mountable
This user guide contains important information about safety precautions and the set-up and use
of the projector.
Please read the manual carefully before you operate the projector.
The specifications and functionality of the product may change without prior notice.
2
Page 8
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
3. SAFETY
3.1 Safety
This device complies with relevant safety regulations for data processing equipment for use in
an office environment.
Before using the projector for the first time, please read the safety instructions thoroughly.
3.2 Safety Instructions
Use only the cables and cords supplied with the projector or original replacement cables. Using
other cables or cords may lead to malfunction and permanent damage of the projector
Only ever open the projector to change the lamp. The projector contains no other user
serviceable parts. Refer all repairs to qualified personnel only.
When changing the lamp always replace it with a lamp of the same type and rating.
Make sure that no objects enter into the vents and openings of the set. Do not spill any liquids
on the projector or into the vents or openings of the projector.
Do not look into the projection lens when the projector is switched on. The strong light may
permanently damage sight.
Do not look into the laser beam when activated on the remote control. Laser light may
permanently damage sight. Do not point the laser beam at other people.
Place the projector on a stable surface, or mount it securely using an approved ceiling-mount.
Do not drop the projector.
Always operate the projector horizontally. Operating the projector in other positions may reduce
the lamp life significantly, and may lead to overheating, resulting in malfunctioning.
Always allow ample airflow through the projector. Never block any of the air vents. Never cover
the projector in any way while it is running. Allow for sufficient distance to walls and ceilings to
avoid overheating.
The projector is designed for indoor use only. Never operate it outdoors.
Do not operate the projector outside its temperature and humidity specifications, as this may
result in overheating and malfunctioning.
Only connect the projector to signal sources and voltages as described in the technical
specification. Connecting to unspecified signal sources or voltages may lead to malfunction and
permanent damage of the projector.
3
Page 9
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
4. BEFORE SET-UP AND USE
Be sure you have read the Safety Instructions in chapter 3 before proceeding with the set-up
and use of the C
Unpack the supplied parts and familiarize yourself with the various components.
Remove the lens cap from the projection lens. If you switch the projector on with the lens cap in
place, the lens cap may melt, damaging not only the lens cap itself, but also the projection lens
and surrounding parts.
OMPACTVIEW CLAN projector.
4
Page 10
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
5. OVERVIEW
A. Focus ring
B. Zoom ring (optional lens)
C. IR sensor
D. Ventilation
E. Keypad
F. Connector panel
Power connector
G.
Lamp house
H.
Adjustable foot
I.
Foot release
J.
Security lock
K.
Ceiling Mount
L.
Control Chain In
M.
Control Chain Out
N.
5
Page 11
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
6. KEYPAD
POWER
Switch the projector on and off.
AUTO
Automatically detect and synchronize to the signal source selected.
MENU
Activate the menu system. Use the four arrow keys and Enter to navigate and to activate.
SELECT/KEYSTONE
Select menu option when the menu system is activated. When the menu system is not in use
the menu button will activate the keystone correction. Use the four arrow keys to adjust
horizontally and vertically.
VOLUME +/-
Use these two arrow keys to adjust the volume when the keystone correction and the menu
system are not activated.
SOURCE
Use these two arrow keys to select the source when the keystone correction and the menu
system are not activated.
STATUS
This is not a key. The LED indicates the current projector status. See chapter Status for details.
6
Page 12
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
7. STATUS
GREEN LIGHT
A permanent GREEN light indicates the
projector is turned on
YELLOW LIGHT
A permanent YELLOW light indicates the
projector is either switched off or is in stand-by
mode.
YELLOW LIGHT FLASHING
A flashing yellow light indicates wait. The
yellow light will flash for a period of 10 -15
seconds after the power cord is connected and
for a period of 45 seconds after the projector
has been turned off.
RED LIGHT
A permanent RED light indicates it is time to
change the projection lamp. Failure to change
the lamp may lead to the lamp exploding.
RED LIGHT FLASHING
A flashing RED light indicates the projector is
overheated. Turn the projector off immediately.
Check if any air inlets are covered or if the
ambient temperature is outside specifications.
Do not remove the power cord.
7
Page 13
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
8. REMOTE CONTROL
A. POWER
Switch the projector on and off.
B. AUTO
Synchronize to the source selected.
C. VOLUME -/+
Use these two keys to adjust the volume.
D. LASER
Activates the laser beam pointer. Do not stare into the laser beam or point it at people!
E. L-SELECT
The left mouse key. Also used to select option when in the menu system.
F. R
The right mouse key.
G. PAD
Used for various functions such as mouse control, keystone correction and menu navigation.
H. VIDEO/ DATA
Use these two keys to select source.
I. MENU
Activates the menu system. Use the PAD (G) to navigate and SELECT (E) to activate.
J. KEYSTONE
Activates the keystone correction. Use the PAD (G) to adjust horizontally and vertically.
K. *
Not in use
L. MUTE
Deactivates sound.
8
Page 14
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
9. CONNECTOR PANEL
A. Component video In G. RS 232 control (E version only)
B. Super video In H. Audio line In (x 4)
C. Composite video In I. Audio Out
D. DVI - Digital RGB J. USB interface
E. VGA - Analogue RGB In (x 2) K. Mains power connector
F. VGA - Analogue RGB Out L IR Receiver rear
9
Page 15
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
10. SET-UP
Before any set-up, switch off all equipment.
10.1 Set-up computer
The projector may be connected to up to three computer sources simultaneously, using the
VGA 1, VGA 2 and DVI inputs.
A VGA monitor may be attached to the MONITOR VGA output (for VGA 1 and VGA 2 inputs
only, will not work for DVI or other video inputs).
Sound may be connected for up to two computer sources simultaneously, one for VGA 1
(AUDIO 1), the other for VGA 2 or DVI (AUDIO 2).
Audio output for an external sound system is available through AUDIO OUT. Connecting to
AUDIO OUT will automatically deactivate the internal loudspeakers.
Connect the USB cable to allow for remote mouse control.
Connect the power cord.
10
Page 16
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
10.2 Set-up Video
Before set-up, switch off all equipment.
Three video sources may be connected, using the R/Pr, G/Y, B/Pb (component), S (super
video) and C (composite video) inputs.
Sound may be connected for up to two video sources simultaneously, one for super or
composite video (AUDIO 3), the other for component video (VIDEO 4).
Audio output for an external sound system is available at the AUDIO OUT connector. When
connecting to an external audio system, the internal loudspeakers are automatically
deactivated.
Connect the power cord. The LED will flash several times before the projector can be switched
On.
11
Page 17
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
11. GCM - GEOMETRY CORRECTION MODULE
Connect the Control PC (running CompactDesigner or CompactControl) to the projectors
‘Control chain In’ port. The supplied 6 lead cable plugs into the Control PC’s serial port using a
RJ12 6 pin to serial DB-9 female adapter.
11.1 Connecting multiple projectors
Multiple projectors may be connected together in a ‘daisy chain’ by using the input and output
ports on each projector. From the first projector, another 6 lead cable connects between the
‘Control Chain Out’ port and the ‘Control Chain In’ port of the second projector. This chain can
be extended up to the theoretical limit of 255 projectors in a single chain.
12
Page 18
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
12. FOCUS AND ZOOM
12.1 Focus
Turn the Focus ring (A) on the projection lens
to get a correctly focused image.
12.2 Zoom
Turn the Zoom ring (B) on the projection lens
to zoom In and Out. (This is only available on
the optional intermittent and long throw lens.)
If the desired image size cannot be achieved
by adjusting the zoom ring, relocate the
projector nearer or farther away from the
projection screen and re-try.
13
Page 19
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
13. MOUNTING THE PROJECTOR
13.1 To a Ceiling Mount
The projector can be ceiling mounted using any approved UL tested/listed ceiling mount fixture
with a minimum weight capacity of 12 kg (26 lbs).
The ceiling mount obtainable through 3D Perception (as illustrated below) is only approved for
C
OMPACTVIEW CLAN projectors.
For the ceiling mount use M4 screw.
For proper ventilation, the minimum distance from the ceiling/rear wall should be 30 - 50 cm, (12
- 20 inches).
The specifications and functionality of the product may change without prior notice.
A Locking screw for vertical adjustment D Housing f or slide
B Locking nut for horizontal adjustment E Night aperture
C Slide F Adjustable flanges*
* Adjustable Flanges are not provided with the ceiling mount, they have to be manufactured by
individual users to their particular required shapes
14
Page 20
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
13.2 To a Tabletop
The projector may be mounted or sited directly onto a tabletop.
To adjust the projected image to the desired
height on the screen, eject the front foot (C) by
pressing the release button (D), and adjust the
angle to the right position.
To get an image level with the screen, turn the
rear feet (E) to the right position.
15
Page 21
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
14. USING THE PROJECTOR
After set-up, switch on all equipment.
To switch the projector on, firmly press the POWER button on the keypad or the remote control.
The STATUS indicator will turn from yellow to green when the projector is switched on.
When only one source is connected, the projector will auto-detect the source. If more sources
are connected, the projector will display the source with the highest priority according to the
following list:
• VGA 1
• VGA 2
• DVI
• Component
• Super video
• Composite video
Sound will follow the selected source. Select between the sources by pressing the SOURCE
buttons on the keypad or the remote control. Only sources that are active will be displayed.
If no source is active, the message “searching” will appear on the screen.
If no source is active for a long time, the projector will go into the standby mode. The projector
will be switched on if at least one source is activated/re-activated. Can be disabled in the menu.
See DPMS in the set up sub menu.
To switch the projector off, firmly press the POWER button on the keypad or the remote control.
The STATUS indicator will turn from green to flashing yellow, then to yellow when switched off.
16
Page 22
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
15. MENU SYSTEM
The menu system gives access to a multitude of image and system controls.
The menu system is structured through a top menu with several sub menus. The sub menus will
vary depending on the actual source selected.
Top Menu
picture:
Basic picture controls
advanced:
Advanced picture controls
audio:
Sound controls
set up:
General projector controls
utilities:
System controls and information
17
Page 23
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
15.1 Picture Sub-menu
brightness:
Adjust the brightness
contrast:
Adjust the contrast
color:
Adjust the colour saturation
tint:
Adjust the video colour shade
sharpness:
Adjust the video sharpness
freeze frame:
Lock the image
scaling:
Select the image format
gamma:
Optimize the image gamma
Video
VGA
DVI
18
Page 24
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
15.2 Advanced Sub-menu
h position:
Moves the image sideways
v position:
Moves the image up and down
color temp:
Changes the colour temperature
custom colour:
Defines the custom colour temperature
video format:
Select between manual or auto (video only)
video type:
Select between video types; DVD and VCR
(video only)
phase:
Adjust for a stable image (computer only)
frequency:
Adjust the image width (computer only)
sharpness:
Adjust the sharpness of images
Video
VGA
DVI
19
Page 25
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
15.3 Audio Sub-menu
volume:
Adjust the sound volume
bass:
Adjust the bass level
treble:
Adjust the treble level
mute:
Switch the sound on and off
20
Page 26
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
15.4 Set-up Sub-menu
keystone V:
Adjust the vertical keystone correction
keystone H:
Adjust the horizontal keystone correction
DPMS:
Activate/de-activate DPMS: Display Power
Management Signalling
source scan:
Switch the source scan on and off
orientation:
Select between desktop front, desktop rear,
ceiling front and ceiling rear mode
OSD:
Select the placement of the On Screen Display
language:
Select between languages
source info:
Displays the source format
21
Page 27
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
15.5 Utilities Sub-menu
OSD timeout:
Defines how long OSD is displayed after last
action
OSD background:
Select the background mode
reset:
Resets the projector to the factory default
settings
service menu:
For service personnel only
lamp reset:
Reset the lamp after a lamp change
OSD:
Turn On/Off the On Screen Display during
source scan
software version
Displays the current software version
lamp on time:
Displays the lamp on time in hours and
minutes
22
Page 28
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
16. MAINTENANCE
The projector may from time to time require cleaning. Never open the projector, as this will void
any warranties. Refer all service and repair work to qualified personnel.
Only the exterior of the projector may be cleaned. Use a damp cloth. Make sure no liquids enter
the inside of the projector
Vacuum-clean all the air vents regularly to
maintain sufficient air flow.
The projection lens is sensitive to
scratches. Use lens-cleaning tissue,
available at all photographic shops when
cleaning the projection lens. Use lens cap
when not in use.
23
Page 29
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
17. LAMP REPLACEMENT
The STATUS lamp on the keypad will turn red when the lamp life expires. In addition, a
message will appear on the screen; “LAMP LIFE TIME HAS EXPIRED! Please change lamp.”
17.1 Remove old lamp
Change the lamp when its lifetime expires. Always replace the lamp with the same type and
rating.
Always disconnect the power cord and wait
until the projector has cooled down (60
minutes) before opening the lamp cover.
Release the screw (A).
Remove the lamp cover (B).
Release the screws on the lamp house (C).
Turn the lamp knob (D) counter clockwise to
the unlocked position.
Pull the handle (E).
Remove the lamp house (F).
24
Page 30
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
17.2 Insert New Lamp
Replace the lamp house (F)
Tighten the screws (C)
Fold the handle (E) in place.
Turn the lamp knob (D) clockwise to the
locked position.
Replace the lamp cover (B) and tighten the
screw (A).
In the “utilities” sub menu, reset the lamp
timer.
25
Page 31
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
18. SERVICE INFORMATION
This product contains no user-serviceable parts.
If the product fails to function as expected, first check that all connections are properly made,
and that the power cord is properly connected.
Check that the projector and the video and computer sources are all switched on.
Cables and cords may break over time. Try changing the cables and cords in case there is a
bad or intermittent connection.
Check if the circuit breaker or the fuse of the mains is intact.
In the event of product failure, please contact your reseller. You should prepare a description of
the symptoms of failure you experience. Also state the projector number and serial number as
printed on the label on the bottom of the projector.
26
Page 32
3D Perception COMPACTVIEW CLAN
X
X
X
X
X
X
X
Revision 3 User Manual
19. TECHNICAL DATA
19.1 General
CompactView X15-I X15-E
Native Resolution 1024 X 768 1024 X 768 1024 X 768 1024 X 768 1280 X 1024 1280 X 1024 1280 X 1024 1280 X 1024
Aspect Ratio Native 4 : 3 4 : 3 4 : 3 4 : 3 5 : 4 5 : 4 5 : 4 5 : 4
Aspect Ratio Compatible 16 : 9 16 : 9 16 : 9 16 : 9 16 : 9 / 4 : 3 16 : 9 / 4 : 3 16 : 9 / 4 : 3 16 : 9 / 4 : 3
Light Output ANSI (Nom)
Contrast Ratio On/Off >1600:1 >1600:1 >1600:1 >1600:1 >900:1 >900:1 >900:1 >900:1
Warping Internal CompactUTM Internal CompactUTM Internal CompactUTM Internal CompactUTM
Warping control RS-232 N/A RS-232 N/A RS-232 N/A RS-232 N/A
Rotate, Flip, Mirror Yes Yes Yes Yes Yes Yes Yes Yes
DLP Double Data Rate
Mirror Angle 12 12 12 12 10 10 10 10
Lamp UHP (W) 250 250 250 250 250 250 250 250
Lamp Life Hours 2000 2000 2000 2000 2000 2000 2000 2000
Power voltag e( V ) 90-220 90-220 90-220 90-220 90-220 90-220 90-220 90-220
Frequency (Hz)
Power consumption (W)
Noise level (dB) < 30 < 30 < 30 < 30 < 30 < 30 < 30 < 30
Dimensions (mm) 278 x 278 x 105 278 x 278 x 105 278 x 278 x 105 278 x 278 x 105 278 x 278 x 105 278 x 278 x 105 278 x 278 x 105 278 x 278 x 105
Dimension Inches (App.) 11 x 11 x 4 11 x 11 x 4 11 x 11 x 4 11 x 11 x 4 11 x 11 x 4 11 x 11 x 4 11 x 11 x 4 11 x 11 x 4
Weight (Kg) 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
Weight (lb)
Conformance CE, UL, FCC/A CE, UL, FCC/A CE, UL, FCC/A CE , UL, FCC/ A CE, UL, FCC/A CE, UL , FCC/ A CE, UL, FCC/A CE, UL, FCC/A
1400 1400 2500 2500 1400 1400 2500 2500
Dark Metal Dark Metal Dark Metal Dark Metal Dark Metal Dark Metal Dark Metal Dark Metal
50-60 50-60 50-60 50-60 50-60 50-60 50-60 50-60
370 370 370 370 370 370 370 370
8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6
30-I
30-E SX15-I SX15-E SX30-I SX30-E
19.2 Optics
CompactView X15-I
Standard Lens - Wide Angle 1 : 1.25 1 : 1.25 1 : 1.25 1 : 1.25 1 : 1 1 : 1 1 : 1 1 : 1
Throw Distance (m) 1.5 - 10 1.5 - 10 1.5 - 10 1.5 - 10 1.5 - 10 1. 5 - 10 1 .5 - 10 1.5 - 10
Keystone angle (degrees)
Optional Lens - Intermittent Throw 1 : 2.2 - 2.8 1 : 2.2 - 2.8 1 : 2.2 - 2.8 1 : 2.2 - 2.8 1 : 1.75 - 2.25 1 : 1.75 - 2.25 1 : 1.75 - 2.25 1 : 1.75 - 2.25
Throw Distance (m) 1.5 - 10 1.5 - 10 1.5 - 10 1.5 - 10 1.5 - 10 1. 5 - 10 1 .5 - 10 1.5 - 10
20.6 20.6 20.6 20.6 25.8 25.8 25.8 25.8
15-E
30-I
30-E SX15-I SX15-E SX30-I SX30-E
19.3 Video
CompactView X15-I X15-E
Bandwidth RGB
Bandwidth DVI
Bandwidth Component
Framesync / Input Lock
Input signals
Computer Compability
Video Compability
205 MHz 205 MHz 205 MHz 205 MHz 205 MHz 205 MHz 205 MHz 205 MHz
165 MHz 165 MHz 165 MHz 165 MHz 165 MHz 165 MHz 165 MHz 165 MHz
75 MHz 75 MHz 75 MHz 75 MHz 75 MHz 75 MHz 75 MHz 75 MHz
48 - 62 48 - 62 48 - 62 48 - 62 48 - 62 48 - 62 48 - 62 48 - 62
2 X VGA 2 X VGA 2 X VGA 2 X VGA 2 X VGA 2 X VGA 2 X VGA 2 X VGA
1 X DVI 1 X DVI 1 X DVI 1 X DVI 1 X DVI 1 X DVI 1 X DVI 1 X DVI
1 X Component 1 X Component 1 X Component 1 X Component 1 X Component 1 X Component 1 X Component 1 X Component
1 x S Video 1 x S Video 1 x S Video 1 x S Video 1 x S Video 1 x S Video 1 x S Video 1 x S Video
UXGA, SX GA ,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
UXGA, SX GA,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
30-I
UXGA, SXGA,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
30-E SX15-I SX15-E SX30-I SX30-E
UXGA, SX GA,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
UXGA, SX GA,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
UXGA, SXGA,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
UXGA, SXGA,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
UXGA, SX GA,
SXGA +, XGA,
SVGA
HDTV
1080i,
720p,
576 i/p
480 i/p
Full NTSC
NTSC 4,43,
PAL
PAL-M
PAL-N
SECAM,
27
Page 33
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
20. COVERS
20.1 Cable cover
Loosen the rear adjustable feet by unscrewing them.
Align the vertical hooks on the cover with the guides on the rear of the projector.
Snap the cover into place with the lower guides clamping the rear feet.
Tighten the rear feet to fix the cable cover (A) in place.
Tip: Connect all cables and fix them in place before the cable cover (A) is attached to the
projector.
20.2 Airflow cover
Affix Airflow cover (B).
28
Page 34
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
21. LIMITED WARRANTY, ‘FCC STATEMENT’ AND ‘TRADEMARKS
COPYRIGHT’
Limited Warranty
Except as otherwise stated herein, 3D Perception warrants that a C
is free from defects in parts and labour under normal use during the warranty period. The
warranty period means the 12-month period from the date of purchase of a C
projector.
During the warranty period, 3D Perception will, at its option and in its sole discretion, repair or
replace defective parts, including replacement of the entire C
additional charge to the Customer. However, the Customer is responsible for all shipping and
insurance costs incurred in returning any C
OMPACTVIEW CLAN projector to the Customer wh ich
does not require any repair or replacement work, as determined by 3D Perception in its sole
discretion. This limited warranty does not extend to any 3D Perception product that has been
damaged as a result of accident, misuse, or abuse. Nor does it extend to the use of parts not
manufactured or sold by 3D Perception, by unauthorised modification of a C
projector, or as a result of servicing by unauthorised personnel. This limited warranty extends
only to the Customer, and is not transferable or applicable to any other third party or user,
including any one who purchases a used C
OMPACTVIEW CLAN projector. Any person asserting a
claim under this limited warranty must establish to 3D Perception’ satisfaction the date of
purchase and that a C
OMPACTVIEW CLAN projector was purchased new.
Other warranty and liability limitations
Aside from this standard published warranty, 3D Perception makes no warranty of any kind,
express or implied, including without limitation, those of merchantability and of fitness for a
particular purpose. Without limiting the generality of the foregoing, any description of a
C
OMPACTVIEW CLAN projector is for the sole purpose of identifying it, is not part of the basis of
any bargain, and does not constitute a warranty that the item sold shall conform to that
description. The use of any sample or model is for illustrative purposes only, it is not part of the
basis of any bargain, and it is not to be construed as a warranty that a C
projector will conform to the sample or model.
No affirmation of fact or promise made by 3D Perception shall constitute a warranty that a
C
OMPACTVIEW CLAN projector will conform to the affirmation or promise. 3D Perception makes
no warranty that the goods are free from claims of infringement of patents, trademarks, or
copyrights. This limited warranty shall be the exclusive remedy. 3D Perception shall not be
liable to customers or others for incidental, consequential, or special damages, or lost profits.
Under no circumstance shall 3D Perception liability or customer’s remedy for damages against
3D Perception exceed its cost for a C
OMPACTVIEW CLAN projector.
OMPACTVIEW CLAN projector
OMPACTVIEW CLAN
OMPACTVIEW CLAN projector, at no
OMPACTVIEW CLAN
OMPACTVIEW CLAN
29
Page 35
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
Procedure for claims
Any and all questions or claims concerning a C
Perception authorised personnel through the VAR from whom the C
was purchased. In no case shall a C
OMPACTVIEW CLAN projector be returned without first
OMPACTVIEW CLAN projector shall be made to 3D
OMPACTVIEW CLAN projector
securing the authority of 3D Perception or its authorised personnel. Any damages to, defects in,
loss of, non conformities in, or any other claim concerning a C
OMPACTVIEW CLAN projector
which could be discovered by inspection upon delivery must be reported to the delivering
carrier, and in writing to 3D Perception at: the following address, promptly and in no event later
than thirty (30) days after delivery.
3D Perception AS
Solbråveien 41
P.O. Box 455
N-1373 Asker
Norway
In the case of any such claim, inspection shall be promptly arranged with 3D Perception or it’s
authorised personnel, and where appropriate, representatives of the carrier. Any other claim or
action respecting the condition or conformity of a C
matter affecting a C
OMPACTVIEW CLAN projector must be submitted in writing to 3D Perception
OMPACTVIEW CLAN projector or any other
promptly upon discovery and in no event later than expiration of the Warranty Period. Any part
of a C
OMPACTVIEW CLAN projector which is subject of any claim shall be set aside and
protected, without further processing or use, until 3D Perception or its authorised personnel
have an opportunity to inspect it and advice the Customer of the disposition, if any to be made
thereof. Failure to give timely written notice of any claim shall bar any remedy.
Technical advice
3D Perception, or its authorised personnel, may furnish technical advice with reference to the
use of a C
OMPACTVIEW CLAN projector, but there is no obligation to furnish such advice. If any
advice or assistance is furnished, it shall be given and accepted at Customer’s risk, 3D
Perception shall not be responsible or liable for the advice or assistance given or the results
thereof.
FCC Statement
A C
OMPACTVIEW CLAN projector has been tested and found to comply with the limits for a 'Class
A' digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when it is operated in a commercial
environment. A C
OMPACTVIEW CLAN projector generates, uses and can radiate radio frequency
energy and, if not used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of a C
OMPACTVIEW CLAN projector in a
residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at own expense.
30
Page 36
3D Perception COMPACTVIEW CLAN
Revision 3 User Manual
22. CONTACT US
3D PERCEPTION AS
Solbråveien 41
P. O. Box 455
N1373 Asker
Norway
Tel: +47 66 98 70 70
Fax: +47 66 98 70 71
Support desk: +47 66 98 70 90
Web site www.3d-perception.com
31
Loading...