Heat & Glo LifeStyle SL-550TV-IPI-E User Manual

Size:
4.76 Mb
Download

ÎPara obtener un ejemplar en Español de este Manual del propietario, visite www.heatnglo.com.

Pour demander un exemplaire en français de ce Manuel du propriétaire, visitez www.heatnglo.com.

Owner’s Manual

Installation and Operation

Models:

SL-550TV-IPI-E

SL-750TV-IPI-E

SL-950TV-IPI-E

NOTICE

DO NOT DISCARD THIS MANUAL

• Important operating

• Read, understand and follow

• Leave this manual with

and maintenance

these instructions for safe

party responsible for use

instructions included.

installation and operation.

and operation.

DO DISCARDNOT

WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death.

DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

What to do if you smell gas

-DO NOT try to light any appliance.

-DO NOT touch any electrical switch.DO NOT use any phone in your building.

-Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

-If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

DO NOT touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in same room as fireplace.

Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other flammable materials away.

This appliance has been supplied with an integral barrier to prevent direct contact with the fixed glass panel. DO NOT operate the appliance with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the barrier is not present or help is needed to properly install one.

In the Commonwealth of Massachusetts installation must be performed by a licensed plumber or gas fitter.

A CO detector shall be installed in the room where the appliance in installed.

Installation and service of this appliance should be performed by qualified personnel. Hearth & Home Technologies suggests NFI certified or factory trained professionals, or technicians supervised by an NFI certified professional.

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

1

NATURAL GAS

Read this manual before installing or operating this appliance.

Please retain this owner’s manual for future reference.

A. Congratulations

Congratulations on selecting a Heat & Glo gas fireplace, an elegant and clean alternative to wood burning fireplaces. The Heat & Glo gas fireplace you have selected is designed to provide the utmost in safety, reliability, and efficiency.

As the owner of a new fireplace, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future reference. We suggest that you keep it with your other important documents and product manuals.

The information contained in this owner’s manual, unless noted otherwise, applies to all models and gas control systems.

Your new Heat & Glo gas fireplace will give you years of durable use and trouble-freeenjoyment. Welcome to the Heat & Glo family of fireplace products!

Homeowner Reference Information

We recommend that you record the following pertinent information about your fireplace.

Model Name: ___________________________________________ Date purchased/installed:__________________

Serial Number:__________________________________________ Location on fireplace: _____________________

Dealership purchased from: _______________________________ Dealer Phone: __________________________

Notes: _______________________________________________________________________________________

_____________________________________________________________________________________________

Listing Label Information/Location The model information regarding your specific fireplace can be found on the rating plate usually located in the control area of the fireplace.

Type of Gas

Gas and Electric

Information

This product may be covered by one or more of the following patents: (Nos produits sont couverts par un ou plusieurs des brevets suivants): (United States) 4593510, 4686807, 4766876, 4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495, 5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 5947112, 5996575, 6006743, 6019099, 6048195, 6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2, 6729551, 6736133, 6748940, 6748942, D320652, D445174, D462436; (Canada)1297749, 2195264, 2225408; or other U.S. and foreign patents pending (ou autres brevets americains et etrangers en attente).

Heat & Glo, a brand of Hearth & Home Technologies, Inc. 7571 215th Street West, Lakeville, MN 55044

Not for use with solid fuel.

(Ne doit pas entre utilise avec un combustible solide).

Type of Gas(Sorte De Gaz): This appliance must be installed in accordance with local codes, ifany; if not, follow ANSI Z223.1in the USAor CAN/CGA B149 installation codes.(Installer l’appareil selon les codes ou reglements locaux ou, en l’absence de tels reglements, selon les codes d’installation CAN/CGA-B149.)

ANSI Z21XX-XXXX· CSA2.XX-MXX· UL307B

Minimum Permissible Gas Supply for Purposes of Input Adjustment.

 

 

 

Approved Minimum(De Gaz) Acceptable

0.0in w.c.

(Po.Col. d’eau)

 

 

 

Maximum Pressure (Pression)

 

0.0 in w.c.

(Po.Col. d’eau)

 

 

 

Maximum Manifold Pressure(Pression)

0.0 in w.c.

(Po.Col. d’eau)

 

 

 

Minimum Manifold Pressure(Pression)

0.0 in w.c.

(Po.Col. d’eau)

 

 

 

Total Electrical Requirements: 000Vac, 00Hz., less than 00 Amperes

MADE IN USA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IN CANADA

 

Model:

XXXXXXXX

 

ALTITUDE:

0-0000FT.

0000-0000FT.

 

(Modele):

 

MAX. INPUT BTUH:

00,000

00,000

 

 

 

 

 

 

 

MIN. INPUT BTUH:

00,000

00,000

 

Serial

XXXXXXXX

 

ORIFICE SIZE:

#XXXXX

#XXXXX

 

 

 

(Serie):

 

Model Number

Serial Number

2

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

Safety Alert Key:

DANGER! Indicates a hazardous situation which, if not avoidedwill result in death or serious injury.

WARNING! Indicates a hazardous situation which, if not avoidedcould result in death or serious injury.

CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE: Used to address practices not related to personal injury.

Table of Contents

A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

B. Limited Lifetime Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . 5

1 Listing and Code Approvals

A. Appliance Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

B. Tempered Glass Specifications . . . . . . . . . . . . . . . . . . . . . 7

C. BTU Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

D. High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . . 8

E. Non-CombustibleMaterials Specification. . . . . . . . . . . . . . 8

F. Combustible Materials Specification . . . . . . . . . . . . . . . . . 8

G. Electrical Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

User Guide

2 Operating Instructions

A. Gas Fireplace Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 B. Your Fireplace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 C. Fan Kit (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 D. Clear Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 E. Decorative Doors and Fronts . . . . . . . . . . . . . . . . . . . . . . 10 F. Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 G. Remote Controls, Wall Controls and Wall Switches. . . . . 10 H. Before Lighting Fireplace . . . . . . . . . . . . . . . . . . . . . . . . . 10 I. Lighting Instructions (IPI) . . . . . . . . . . . . . . . . . . . . . . . . . 11 J. After Fireplace is Lit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 K. Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . 12

3 Maintenance and Service

A. Maintenance Tasks-Homeowner . . . . . . . . . . . . . . . . . . .13

B. Maintenance Tasks-QualifiedService Technician . . . . . . 14

Installer Guide

4 Getting Started

A. Typical Appliance System. . . . . . . . . . . . . . . . . . . . . . . . . 16

B. Design and Installation Considerations . . . . . . . . . . . . . . 17

C. Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . . 17

D. Inspect Appliance and Components. . . . . . . . . . . . . . . . . 17

E. Negative Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5 Framing and Clearances

A. Selecting Appliance Location . . . . . . . . . . . . . . . . . . . . . . 19

B. Constructing the Appliance Chase . . . . . . . . . . . . . . . . . . 20

C. Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

D. Mantel and Wall Projections. . . . . . . . . . . . . . . . . . . . . . . 21

6 Termination Locations

A. Vent Termination Minimum Clearances . . . . . . . . . . . . . . 22

7 Vent Information and Diagrams

A. Vent Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

B. Vent System Configuration. . . . . . . . . . . . . . . . . . . . . . . . 23

8 Vent Clearances and Framing

A. Pipe Clearances to Combustibles . . . . . . . . . . . . . . . . . . 24 B. Wall and Ceiling Penetration Framing . . . . . . . . . . . . . . . 24 C. Vertical Penetration Framing . . . . . . . . . . . . . . . . . . . . . . 24

9 Appliance Preparation

A. Installing Outside Air Kit Damper Assembly . . . . . . . . . . . 25 B. Gas and Electrical Connections . . . . . . . . . . . . . . . . . . . . 25 C. Securing and Leveling the Appliance . . . . . . . . . . . . . . . . 25

10 Installing Vent Pipe

A. Assembly of Vent Sections. . . . . . . . . . . . . . . . . . . . . . . . 26 B. Attaching Vent to Firebox . . . . . . . . . . . . . . . . . . . . . . . . . 26 C. Securing Vent Sections . . . . . . . . . . . . . . . . . . . . . . . . . . 26 D. Install Attic Insulation Shield. . . . . . . . . . . . . . . . . . . . . . . 26

11 Gas Information

A. Fuel Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

B. Gas Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

C. Gas Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

D. High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . 27

12 Electrical Information

A. Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 B. Intellifire Ignition System Wiring . . . . . . . . . . . . . . . . . . . . 28 C. Optional Accessories Requirements . . . . . . . . . . . . . . . . 28 D. Electrical Service and Repair . . . . . . . . . . . . . . . . . . . . . . 28 E. Junction Box Installation. . . . . . . . . . . . . . . . . . . . . . . . . . 30 F. Wall Switch Installation for Fan (Optional) . . . . . . . . . . . . 30

13 Finishing

A. Mantel and Wall Projections. . . . . . . . . . . . . . . . . . . . . . . 31

B. Facing Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

3

14 Appliance Setup

A. Remove Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 33 B. Remove the Shipping Materials . . . . . . . . . . . . . . . . . . . . 33 C. Clean the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 D. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 E. Lava Rock, Mineral Wool/Ember Placement . . . . . . . . . . 33 F. Install the Log Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 34 G. Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 H. Install the Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 I. Install Trim and/or Surround. . . . . . . . . . . . . . . . . . . . . . . 36 J. Install Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 K. Air Shutter Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

15 Troubleshooting

A. Intellifire Ignition System . . . . . . . . . . . . . . . . . . . . . . . . . 37

16 Reference Materials

A. Appliance Dimension Diagram. . . . . . . . . . . . . . . . . . . . . 39

B. Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

C. Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Î = Contains updated information.

4

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

B. Limited Lifetime Warranty

Heat & Glo • SL-550 /750 /950TV-IPI-E

2119-900Rev. J • 12/09

5

B. Limited Lifetime Warranty (continued)

6

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

1 Listing and Code Approvals

A. Appliance Certification

MODELS: SL-550TV-IPI-E,SL-750TV-IPI-E,SL-950TV-IPI-E

LABORATORY: Underwriters Laboratories, Inc. (UL)

TYPE: B-VentGas Appliance

STANDARD: ANSIZ21.50-2007• CSA2.22-2007

This product is listed to ANSI standards for “Vented Gas Fireplaces” and “Gas Fired Appliances for Use at High Altitudes”.

May be installed in a sleeping room when the provisions for combustion, ventilation and dilution air are met per the requirements of ANSI 223.1/NFPA 54 National Fuel Gas Code. In Canada, installation in a sleeping room requires installation with a thermostat certified for use with this product. Consult your local authorities having jurisdiction.

NOTICE: This installation must conform with local codes. In the absence of local codes you must comply with the National Fuel Gas Code, ANSIZ223.1-latestedition in the U.S.A. and the CAN/CGA B149 Installation Codes in Canada.

This model (natural gas and propane) can be installed in a bedroom (in Canada) if a thermostat (Model WH-STAT)is installed with the unit. Consult local code authorities. Detailed installation instructions for ModelWH-STATare included with the kit.

NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.

This appliance is tested and approved as either supplemental room heat or as a decorative appliance. It should not be factored as primary heat in residential heating calculations.

B. Tempered Glass Specifications

Hearth & Home Technologies appliances manufactured with tempered glass may be installed in hazardous locations such as bathtub enclosures as defined by the Consumer Product Safety Commission (CPSC). The tempered glass has been tested and certified to the requirements of ANSI Z97.1 andCPSC 16 CFR 1202 (Safety Glazing Certification CouncilSGCC# 1595 and1597. Architectural Testing, Inc. Reports02-31919.01 and02-31917.01).

This statement is in compliance with CPSC 16 CFR Section 1201.5 “Certification and labeling requirements” which refers to15 U.S. Code(USC) 2063 stating “…Such certificate shall accompany the product or shall otherwise be furnished to any distributor or retailer to whom the product is delivered.”

Some local building codes require the use of tempered glass with permanent marking in such locations. Glass meeting this requirement is available from the factory. Please contact your dealer or distributor to order.

C. BTU Specifications

Model(s)

Maximum

Minimum

Orifice

U.S. (0-2000ft.) or Canada(2000-4500ft.)

Input BTU/h

Input BTU/h

Size

(DMS)

SL-550TV-IPI-E

US

21,100

14,700

44

 

 

 

 

CAN

18,990

13,230

45

 

 

 

 

 

 

SL-550TV-IPI-E(LP)

US

20,000

14,300

55

 

 

 

 

CAN

18,000

12,870

56

 

 

 

 

 

 

SL-750TV-IPI-E

US

24,800

17,700

42

 

 

 

 

CAN

22,320

15,930

43

 

 

 

 

 

 

SL-750TV-IPI-E(LP)

US

23,200

17,300

54

 

 

 

 

CAN

20,880

15,570

55

 

 

 

 

 

 

SL-950TV-IPI-E

US

30,900

21,300

37

 

 

 

 

CAN

27,810

19,170

38

 

 

 

 

 

 

SL-950TV-IPI-E(LP)

US

30,700

22,500

52

 

 

 

 

CAN

27,630

20,250

53

 

 

 

 

 

 

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

7

D. High Altitude Installations

NOTICE: If the heating value of the gas has been reduced, these rules do not apply. Check with your local gas utility or authorities having jurisdiction.

When installing above 2000 feet elevation:

In the USA: Reduce input rate 4% for each 1000 feet above 2000 feet.

In CANADA: Reduce input rate 10% for elevations between 2000 feet and 4500 feet. Above 4500 feet, consult local gas utility.

Check with your local gas utility to determine proper orifice size.

E. Non-CombustibleMaterials Specification

Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or any combination thereof.

Materials that are reported as passing ASTM E 136,

Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 ºC and UL763shall be considered non-combustible materials.

F. Combustible Materials Specification

Materials made of or surfaced with wood, compressed paper, plant fibers, plastics, or other material that can ignite and burn, whether flame proofed or not, or plastered or unplastered shall be considered combustible materials.

G. Electrical Codes

NOTICE: This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of local codes, withNational Electric Code ANSI/NFPA 70-latest edition or theCanadian Electric Code CSA

C22.1.

A 110-120VAC circuit for this product must be protected withground-faultcircuit-interrupterprotection, in compliance with the applicable electrical codes, when it is installed in locations such as in bathrooms or near sinks.

8

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

2 Operating InstructionsUser Guide

A. Gas Fireplace Safety

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

DO NOT touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in same room as fireplace.

Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other flammable materials away.

This appliance has been supplied with an integral barrier to prevent direct contact with the fixed glass panel. DO NOT operate the appliance with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the barrier is not present or help is needed to properly install one.

If you expect that small children or vulnerable adults may come into contact with this fireplace, the following precautions are recommended:

Install a physical barrier such as:

-A decorative firescreen.

-Adjustable safety gate.

Install a switch lock or a wall/remote control with child protection lockout feature.

Keep remote controls out of reach of children.

Never leave children alone near a hot fireplace, whether operating or cooling down.

Teach children to NEVER touch the fireplace.

Consider not using the fireplace when children will be present.

Contact your dealer for more information, or visit: www. hpba.org/staysafe.

To prevent unintended operation when not using your fireplace for an extended period of time (summer months, vacation, trips, etc):

Remove batteries from remote controls.

Turn off wall controls.

Unplug 3 volt adapter plug and remove batteries on IPI models.

B. Your Fireplace

WARNING! DO NOT operate fireplace before reading and understanding operating instructions. Failure to operate fireplace according to operating instructions could cause fire or injury.

DECORATIVE DOORS

(NOT SHOWN)

SECTION 2.E.

FIXED GLASS ASSEMBLY

(NOT SHOWN)

SECTION 14.G.

OUTSIDE AIR CONTROL

(NOT SHOWN)

SECTION 9.A.

MANTEL

HEARTH

CLEAR SPACE

SECTION 2.D.

Figure 2.1 General Operating Parts

Heat & Glo • SL-550 /750 /950TV-IPI-E2119-900Rev. J • 12/09

9

C. Fan Kit (optional)

• Refer to Figures 2.2 and 2.3 for location of control.

RHEOSTAT

TEMPERATURE

SWITCH

 

SENSOR

Figure 2.2 Fan Wiring with Rheostat

 

VARIABLE

 

SPEED SWITCH

JUNCTION BOX

 

TEMPERATURE

 

SENSOR SWITCH

 

BLUE

 

Figure 2.3 Detail of Fan Wiring with Rheostat

E. Decorative Doors and Fronts

WARNING! Risk of Fire! Install ONLY doors or fronts approved by Hearth & Home Technologies. Unapproved doors or fronts may cause fireplace to overheat.

This fireplace has been supplied with an integral barrier to prevent direct contact with the fixed glass panel. DO NOT operate the fireplace with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the barrier is not present or help is needed to properly install one.

For more information refer to the instructions supplied with your decorative door or front.

F. Fixed Glass Assembly

See Section 14.G.

G.Remote Controls, Wall Controls and Wall Switches

Follow the instructions supplied with the control installed to operate your fireplace:

For safety:

Install a switch lock or a wall/remote control with child protection lockout feature.

Keep remote controls out of reach of children.

See your dealer if you have questions.

D. Clear Space

WARNING! DO NOT place combustible objects in front of the fireplace or block louvers. High temperatures may start a fire. See Figure 2.4.

Avoid placing candles and other heat-sensitiveobjects on mantel or hearth. Heat may damage these objects.

H. Before Lighting Fireplace

Before operating this fireplace for the first time, have a qualified service technician:

Verify all shipping materials have been removed from inside and/or underneath the firebox.

 

 

 

 

• Review proper placement of logs, ember material and/or

 

 

 

 

 

other decorative materials.

 

 

 

 

Check the wiring.

 

 

 

 

Check the air shutter adjustment.

 

 

 

 

Ensure that there are no gas leaks.

 

 

 

 

• Ensure that the glass is sealed and in the proper position

 

 

 

 

 

and that the integral barrier is in place.

 

 

 

 

WARNING! Risk of Fire/Asphyxiation! DO NOT oper-

 

 

 

 

ate fireplace with fixed glass assembly removed.

3

FT.

 

 

 

 

 

 

 

 

 

 

IN CLEAR

 

 

 

 

 

FRONT OFSPACE

 

 

 

 

 

FIREPLACE

 

 

 

 

Figure 2.4 Clear Space

 

 

 

 

10

 

Heat & Glo

SL-550 /750 /950TV-IPI-E

2119-900Rev. J • 12/09