Addonics Technologies AAT18ZIF25 User Manual

153.83 Kb

User Guide

Toshiba 1.8"ZIF to 2.5"

T E C H N O L O G I E S IDE Hard Drive Connector

Converter (AAT18ZIF25)

Installation Guide

2.5” IDE Connector Pin 1

ZIF Connector Pin 1

Note: The master and slave pin settings on the50-pinIDE connector is disabled.


Technical Support

If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212


Master & Slave Pins

Lever Pin 1

Toshiba 1.8” ZIF

(Zero Insertion Force)

Hard Drive

1.Open the locking lever on the Toshiba 1.8” ZIF hard drive.

2.Slide the flat ribbon cable of the converter into the ZIF connector on the hard drive.

3.Close the lever to secure the ribbon cable connection.

Connecting the Toshiba 1.8” ZIF hard drive to a 40-pinIDE connector

AA25IDE35 (optional)









































































































Technical Support (M-F8:30am - 6:00pm PST)

Phone: 408-453-6212