3J USB-P3K User Manual
USB Desk Phone is a most effective and easy mode of communication. User can enjoy an Internet phone just as regular phone. It embraces the great convenience and big savings.
1.With LCD show , caller ID function of VoIP calls
4.USB1.1 and 2.0 compatible, no need sound card.
5.No external power required
6.Echo cancellation, noise reduction, full duplex communication
1.3 System Requirements
1. Windows 2000 or XP
2. 400MHz processor and free USB1.1 or USB2.0 port
3. 128MB RAM and 15MB free disk space
4. Any broadband connection or minimum 33.6 Kbps dialup
1.4 Package Contents
1.one USB Desk Phone
2.one User Manual
3.one USB Cable
4.one Installation CD
2 Using the USB Desk Phone
2.1 Run Skype
Download Skype software and install it(www.skype.com), the version must be 184.108.40.206 or higher.
Run Skype and log in with skype account. You can create a Skype account as below:
After the software startup, the icon will appear to the system tray as shown below:
That indicates the Skype are successfully connected to Internet. If
the icon is shown as, you have to check your Internet connection.
2.2 Connect USB DeskPhone to PC
Connect USB Desk Phone to your PC, the LCD shows "VOIPPhone".
2.3 Run SkypeMate
Insert SkypeMate install CD or download SkypeMate software and install it.
Select the first option “Allow this program to use Skype”, click “OK” button.
Note: If you selected the wrong option, you can make another selection. Please see2.8. FAQ /problem3 for detail.
After running SkypeMate, the icon will appear to the system tray as shown:
That indicates the device and Skype are connected successfully.
If the icon shown as(the phone is green and the outside is grey), please run Skype first.
If the icon shown as (the phone is red and the outside is green),, it means USB Desk Phone connected incorrectly, please reconnect USB Desk Phone to PC.
2.4 Call another Skype user (PC to PC)
Add "bbc456" to Contacts
Input number and call out:
Press digital "11" on USB Desk Phone, this number will be shown on Skype window, then press SEND key on USB Desk Phone to call out.
2.5 Call to normal phone (PC to Phone)
Press "00"+"country number"+"phone number", then press SEND key to call out.
Example: call to China, beijing, press 00861012345678, then
press SEND key.
Note: If you want to use this function, you should buy SkypeOut Credit first.
2.6 Answer a call
When a call in, the USB Desk Phone is ringing, pick up handset to answer the call.
2.7 Function keys
Press to scroll the caller or dialed number.
Scroll to the contacts.
(1)Press to scroll the Skype tab at the ready state.
(2)Delete the input wrong number while dialing.
FLASH: Quit all operation of the phone, and make it standby.SEND: Call out the number shown on LCD screen.
HELP: Press to open the help web page.
SPEAKER: It’s only use for dialing numbers, not for talking. For example: when you want to make a call by handfree, press “SPEAKER” and dial the wanted phone number, then you have to pick up handset for talking.
There is no voice comes out when play music?
Please execute the “Control
The voice is played from the PC’s sound card instead of the USB Desk Phone when I make/answer a call?
Set “Audio In” and “Audio Out” to “USB Audio Device”.
Skype has been started, but the icon of SkypeMate still
shown as(the phone is green and the outside is grey)?
Maybe you have selected the wrong option. You can execute