ZLINE RASWM48, RASRM48, RASRG48, RASBM48, RASBG48 Installation Manual

...
0 (0)

Ranges & Cooktops

CONTENTS

INSTALLATION GUIDE

IMPORTANT SAFETY INSTRUCTIONS

WARRANTY AND SERVICE

BEFORE INSTALLATION

INSTALLING THE LEGS

ANTI-TIP STABILITY DEVICE &

RANGE TOP/DROP-IN INSTALL

INSTALLATION REQUIREMENTS &

RANGE TOP/DROP-IN CUT-OUTS

ELECTRICAL CONNECTION

WIRING SCHEMATICS

GAS CONNECTION

GAS CONVERSION PROCEDURE

INSTALLATION CHECKLIST

FINAL PREPARATION

1

3

5

7

8

11

12

13

15

18

22

22

CONTENTS

USERS MANUAL

 

 

 

ROOM VENTILATION

24

SURFACE BURNER LAYOUT

24

OVEN COOKING

25

USING THE OVEN

26

MAINTAINING YOUR RANGE

30

TROUBLESHOOTING

32

THANK YOU

We want to thank you for choosing one of our beautiful professional ranges. We know that you have many brands to choose from and we are thrilled that you have decided to place one of our products in your home.

Our appliances are designed according to the strictest safety and performance standards for the North American market. We follow the most advanced manufacturing process. Each appliance leaves the factory after thorough quality inspection and testing. Our distributors and our service partners are ready to answer any questions you may have regarding installation of your ZLINE product.

This manual will help you learn to use the product in the safest, most efficient manner, and care for it so that it may give you the highest satisfaction for years to come.

This manual also includes directions for the professional installer that will install the product in your home. We recommend professional installation by trained personnel.

Please keep this manual for future use.

Range Installation Video

LOCATION OF APPLICANCE TAGS

The rating tag shows the model and serial number of your range. The tag is located under the front edge of the range cooktop. The tag is visible when the oven door is open.

Appliance Tag Here

Important Appliance Information

Dealer

Model

Date Installed

Installer

IMPORTANT SAFETY INSTRUCTIONS

An air curtain or other overhead range, range, cooktop hood which

operates by blowing downward airflow onto the range, shall not be

WARNING

used/installed in conjunction with this gas range.

The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance.

The manufacturer reserves the right to make changes to its products when considered necessary and useful, without affecting the essential safety and operating characteristics.

This appliance has been designed for non-professional, domestic use only. Do not place any pot or pan on the open oven door, the door is made of glass and can break under the weight.

Before beginning installation, please read these instructions completely and carefully. Do not remove permanently affixed labels, warnings, or plates from the product.

This may void the warranty. Please observe all local, state and national codes and ordinances. Please ensure the range is properly grounded. The installer should leave these instructions with the consumer who should retain for local inspectors use and for future reference. The plug should always be accessible. Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code NSIZ223. 1/NFPA54. Electrical installation must be in accordance with the National electrical code ANSI/NPA70-latest edition and/or local codes. In Canada: Installation must be in accordance with the current CAN/CGA-fe 149.1 National gas installation code or CAN/CGA-B 149.2, Propane installation code and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian electrical codes Part 1 and/or local codes.

Installation of any gas-fired equipment should be made by a licensed plumber. A manual gas shut-off valve must be installed in the gas supply line ahead of the oven in the gas flow for safety and ease of service.

IMPORTANT SAFETY INSTRUCTIONS

Important Safety Information

Please read and follow these important instructions for the safety of your home and the people living in it.

If the information in this manual is not followed exactly, a fire or

explosion may result causing property damage, personal injury, or

WARNING

death.

Do not store or use gasoline or any other flammable substances in the vicinity of this or any other appliance.

What To Do If You Smell Gas

DO NOT light any appliance.

DO NOT touch any electrical switch.

DO NOT use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone, follow the gas supplier’s instructions.

In the case you cannot reach the gas supplier, call the fire department.

Installation and service must be conducted by a qualified installer, service agency, or the gas supplier.

Never use this appliance as a space heater to heat or warm the

room. Doing so may result in carbon monoxide poisoning and

WARNING

overheating of the oven.

1

2

ZLINE RASWM48, RASRM48, RASRG48, RASBM48, RASBG48 Installation Manual

WARRANTY AND SERVICE

Warranty and Service

All range products carry a one year parts warranty. Service on all products shall be carried out by factory-trained professionals only. For warranty service, please call customer service.

Replacement Parts

Only authorized replacement parts may be used in performing service on this appli-

ance.

Replacement parts are available from ZLINE. Call 1-614-777-5004.

PRODUCT DIMENSIONS

Internal Dimensions

48” Model: 26.5” W/12.5”W x 18.5”D x 14”H

36” Model: 30.5”W x 18.5”D x 14”H

30” Model: 26.5” W x 18.5”D x 14”H

PRODUCT DIMENSIONS

Dropins:

Cooktops:

Cooktop cut outs:

Drop-in & Cooktop

Installation Video

3

4

BEFORE INSTALLATION

This appliance shall only be installed by an authorized professional.

The appliance shall be installed in accordance with the standards of the country where it will be installed. The installation of this appliance must conform to local codes and ordinances. In the absence of local codes installation must conform to American National Standards, National fuel Gas code ANSI Z223.1-Latest edition/ NFPA 54 or B 149.1.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical code, ANSI/NFPA 70.

If local codes permit, a flexible metal appliance con-nections with the new AGA or CGA certified design, max 5 feet (1,5m) long, 34˝ I.D. is recommended for connecting this appliance to the gas supply line. DO NOT bend or damage the flexible connector when moving the appliance.

This appliance must be used with the pressure regulator provided. The regulator must be properly installed in order to be accessible when the appliance is installed in

its final location. The pressure regulator must be set for the type of gas to be used. The pressure regulator has 34˝ female pipe thread. The appropriate fitting must be determined based on the size of your gas supply line, the flexible metal connector and the shut-off valve.

The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 34 PSI(13,8w.cpr 3,5kPA).

All opening holes in the wall and floor, back and under the appliance shall be sealed before installation of the appliance.

A manual valve shall be installed in an accessible location in the gas line external to the appliance for the purpose of turning on and shutting off the gas to the appliance.

 

 

Do not use aerosol sprays in the vicinity of this appliance while it is

 

WARNING

in operation.

 

BEFORE INSTALLATION

Room Ventilation

An exhaust fan may be used with the appliance; in each case it shall be installed in conformity with the appropriate national and local standards. Exhaust hood operation may affect other vented appliances; in each case it shall be installed in conformity with the appropriate national and local standards.

Type of Gas

This appliance is shipped from the factory for use with natural gas. For use with propane LP gas, please follow the conversion procedure described on pg. 18. A step by step conversion procedure is also included with each set of LP gas nozzles.

Gas Pressure

The maximum inlet gas supply pressure incoming to the gas appliance pressure regulator is 34PSI (13,8w. cpr 3,5kPA).

The minimum gas supply pressure for checking the regulator setting shall be at least 1˝ w.c (249 Pa) above the inlet specified manifold pressure to the ap-pliance (This operating pressure is 4˝ w.c. (1.00kPa) for Natural gas and 11˝ w.c. (2.75 kPa) for LP gas.

Gas cooktop requires 1”- 6”side wall spacing above the counter height for proper combustion. Please review specific model installation instructions for required dimensions. 30 inches between the cooktop and bottom of the cabinet above. 0.25 inches for sides below countertop height.

NOTE: Please consult your local building codes for variations with installation.

5

6

INSTALLING THE LEGS

The ranges must be used with the legs properly installed. Four height-adjustable legs are shipped with the range, in a foam container above the range.

INSTALLING THE LEGS

1.Before installing the legs, position the appliance near its final location as the legs are not suitable for moving the appliance over long distances.

2.After unpacking the range, raise it enough to insert the legs in the appropriate receptacles situated on the lower part of the appliance. Lower the range gently to keep any undue strain from legs and mounting hardware.

3.Adjust leg height to the desired level by twisting the inside portion of the leg

as-sembly until the proper height is reached. Check with a level that the cooktop is perfectly level.

INSTALLING THE ANTI-TIP STABILITY DEVICE

Installing the Anti-Tip Stability Device

The Anti-tip bracket shipped with the range must be properly

secured to the rear wall as shown in the picture on the following page.

The height of the bracket from the floor must be determined after the range legs have been adjusted to the desired height and after the range has been leveled.

A child or adult can tip the range and be killed; Re-engage the

anti-tip device if the range is moved. Failure to do so can result in

WARNING

death or serious injury.

RANGE TOP/DROP-IN INSTALLATION

Attaching the hotplate

To prevent liquids from accidentally leaking into the underlying storage space, the appliance is equipped with a special gasket. To apply this gasket, carefully follow the instructions in Fig. 3. Lay out the protective sealing strips along the edges of the opening in the bench top and carefully overlap the strip end. (See Fig. 3). insert the hotplate into the bench top opening. With a screwdriver assemble the brackets (A) to the hotplate bottom by means of the screws (B) (See Fig. 4). Slide the hooks into position and secure them with the screws. Trim the part of the sealing strips that extend beyond the hotplate base.

Gas Connection

Please review gas connection on page 15.

7

8

Loading...
+ 14 hidden pages