ZIRCON StudSensor User guide

StudSensor™finds the edges of studs up to

3

⁄4inch (19 mm) deep.

Key Features

• Finds both wood and metal studs

®

• Patented TruCal

• Bright LEDs and audio indicator

• Ergonomic shape to fit in your hand

• Tough for jobsite use

instant calibration

Applications

Find the edges of wood or metal studs to:

• Hang pictures and mirrors

• Install drapery rods

• Install plant hangers, towel bars, etc.

• Install closet organizers

• Install cabinets and shelves

StudSensor

Electronic

Stud Finder

The

ZIRCON

• Uses a patented sensor that pinpoints the
edges of wood or metal studs behind
walls or ceilings.

• Calibrates instantly for immediate use.

• Bright LEDs and an audio signal indicate
stud edges.

• A new, patented, ergonomic shape and pocket
clip for a smaller, user-friendly profile.

• Made to withstand daily jobsite use.

Advantage

™

www.zircon.com

PATENTED

PATENTED

StudSensor™Technical Information

®

Dimensions 5.54 in. H x 2.33 in.W x 1.18 in. D

(141 mm x 59 mm x 30 mm)

Weight 2.3 oz. (65 g) without battery

Battery type 9-V alkaline (not included)

1

Position accuracy Typically within

and mark procedure

Depth Typically up to

NOTE: Sensing depth and edge detection can vary due to

moisture content of materials, wall texture, paint, etc.

Operating temperature 20° to 120°F (-7° to 49°C)

Storage temperature -20° to 150°F (-29° to 66°C)

Humidity 80% RH (noncondensing)

⁄8in. (3 mm) using the dual scan

3

⁄4in. (19 mm)

Water resistance Splash and water resistant, not waterproof

®

TruCal
Instant
Calibration

Over-the­Stud
Warning

Ergonomic
Design

Order Information Part Number UPC
StudSensor

™

57953 0 42186 57953 6

1580 Dell Avenue
Campbell, CA 95008-6992
Tel: [phone] or 408-866-8600
Fax: [phone]

E-mail: [e-mail]

©2002 Zircon Corporation • Col #0520 • Rev A (05/02)