ZETTLER AZ983 Technical data

ZETTLER electronics GmbH

Fax +49 89 800 97 200 www.ZETTLERelectronics.com

office@ZETTLERelectronics.com 0 97 800 89 +49 Tel.

Germany Puchheim, D-82178 Junkersstrasse 3,

2003-06-24

AZ983

COIL

Power

At Pickup Voltage 0.76 W (typical)

Max. Continuous 3.0 W at 20°C (68°F) Dissipation

Temperature Rise 68°C (122°F) at nominal coil voltage

Temperature Max.155°C (311°F)

CONTACTS

Arrangement SPST (N.O.) (1 Form A)

SPDT (1 Form C), SPST (N.C.) (1 Form B)

Ratings Resistive load:

Max. switched power: 1120 W (SPST) Form A

840 W (N.O.) Form C 840 W (N.C.) Form C,

Form B

Max. switched current: 80 A (SPST) Form A

60 A (N.O.) Form C 60 A (N.C.) Form C,

Form B

Max. switched voltage: 30 VDC

Material Silver tin oxide Resistance < 50 milliohms initially

(24 V, 1 A voltage drop method)

80 AMP AUTOMOTIVE RELAY

FEATURES

• 80 Amp contact rating

• High momentary carry current

• High operating temperature (85°C)

• SPST N.O. (1 Form A), SPDT (1 Form C),

SPST N.C. (1 Form B)

• PCB terminals

• Epoxy sealed version available

GENERAL DATA

Life Expectancy Minimum operations

Mechanical 1 x 10

Electrical 1 x 105at 80 A 14 VDC Res. Operate Time (typical) 7 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength 500 Vrms coil to contact (at sea level for 1 min.) 500 Vrms contact to contact

Insulation Resistance 100 megohms min. at 500 VDC, 20°C

50% RH

Dropout Greater than 10% of nominal coil voltage Ambient Temperature

Operating -40°C (-40°F) to 85°C (185°F)

Storage -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10-55 Hz Shock 10 g Enclosure P. B.T. polyester Terminals Copper alloy

PCB

Weight 40 grams

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

查询AZ983供应商

2003-06-24

ZETTLER electronics GmbH

Fax +49 89 800 97 200 www.ZETTLERelectronics.com

office@ZETTLERelectronics.com 0 97 800 89 +49 Tel.

Germany Puchheim, D-82178 Junkersstrasse 3,

AZ983

MECHANICAL DATA

[1.5]

2 x .058

[3.5]

.137

[10.6]

.418

[3.9]

3 x .154

[7.8]

3 x .307

[ø2.0±.076]

2 x ø.079±.003

[8.5]

.335

[17.0]

.669

[9.9]

.390

[ø2.3±.076]

9 x ø.090±.003

[9.5]

3 x .374

[1.6]

9 x .063

[1.2]

3 x .047

[1.5]

3 x .059

[3.8]

3 x .150

[0.8]

2 x .032

[6.3]

2 x .248

[29.0]

1.142

[28.0]

1.102

[1.5]

2 x .059

[2.9]

2 x .116

[8.4]

.331

[8.0]

.315

FORM C VERSION SHOWN

87A

FORM C VERSION SHOWN

VIEWED TOWARD TERMINALS

PC BOARD LAYOUT

1 FORM C

87A

1 FORM B1 FORM A

VIEWED TOWARD TERMINALS

WIRING DIAGRAMS

Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"

RELAY ORDERING DATA

COIL SPECIFICATIONS ORDER NUMBER

Nominal Coil Must Operate Max. Continuous Coil Resistance

SPST SPDT

VDC VDC VDC ± 10%

6 3.9 7.8 20 AZ983–1A–6D AZ983–1C–6D 12 7.8 15.6 80 AZ983–1A–12D AZ983–1C–12D 24 15.6 31.2 320 AZ983–1A–24D AZ983–1C–24D

For SPST (N.C.) (1 Form B) relay, substitue “1B” for “1A”

Add suffix “R” for resistor in parallel with coil. Resistor values: 6V: 180 Ω, 12V: 680 Ω, 24V: 2700 Ω. Add suffix “D” for diode across coil option (+ pole at terminal #86). Add suffix “E” for epoxy sealed version.

1.043 [26.5]