ZETTLER AZ975-1A-6D, AZ975-1A-24D, AZ975-1A-12D, AZ976-1B-12D, AZ976-1A-6D Datasheet

...
0 (0)
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 10
7
operations
Electrical 1 x 105operations at rated load Operate Time (typical) 3 ms at nominal coil voltage Release Time (typical) 1.5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms between open contacts
Insulation Resistance 100 megohms min. at 20°C,
500 VDC, 50% RH
Dropout > 6% (for B&V), > 11% (for ACUW)
of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 155°C (311°F) Vibration 0.062" DA at 10–55Hz Shock 10 g, 11 ms, functional Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight AZ975 = 8g, AZ976 = 12g, approx.
ZETTLERelectronics
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
2000-05-09
AZ975/AZ976
NOTES
1. All values at 20°C (68°F).
2. Maximum make current refers to in-rush current of lamp load.
3. Electrical life obtained at resistive or inductive load of 10A, 15 VDC for A, B, C, U, V contacts, 7A, 15 VDC for W contacts with suitable arc-suppression circuit attached with operating frequency of 1 ops/sec.
4. Relay may pull in with less than “Must Operate” value.
5. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage 514 mW (12 and 24 VDC Coil) (typical) 573 mW (6 VDC Coil)
Max. Continuous Dissipation 2.5 W 20°C (68°F) ambient
Temperature Rise 60°C (108°F) nominal coil VDC
Max. Temperature 155°C (311°F)
CONTACTS
Arrangement SPSTNO (1 Form A) SPST NO DM (1 Form U)
SPSTNC (1 Form B) SPST NC DB (1 Form V) SPDT (B-M) (1 Form C) SPDT NC-NO DM (1 Form W)
Ratings Max. switched power: 200 W (See power curve)
500 VA
Max. switched voltage: 100 VDC Max. switched current (make/break), continuous:
1 Form A: 60A/20A, 15A 1 Form B: 12A/10A, 10A 1 Form C (NO): 60A/20A, 15A 1 Form C (NC): 12A/10A, 10A 1 Form U: 2X40A/2X20A, 2X10A 1 Form V: 2X8A/2X7A, 2X7A 1 Form W (NO): 2X30A/2X15A, 2X7A 1 Form W (NC): 2X5A/2X5A. 2X5A
Minimum Load 12 VDC, 0.5 A Material AgNi Resistance < 100 milliohms at 1A, 5 VDC
20 AMP SUB-MINIATURE POWER RELAY FOR AUTOMOTIVE USE
FEATURES
Low cost
Up to 20 Amp switching capability in a compact size
Open, covered or sealed
Coils to 24 VDC
Small footprint
Six different contact arrangements available
Vibration and shock resistant
Designed for high in-rush applications
Loading...
+ 2 hidden pages