AZ954
SUBMINIATURE
POWER RELAY
FEATURES
•Subminiature size for high density packaging
•Coil sensitivity to 114 mW
•Extremely low cost
•Coils to 24 VDC
•Epoxy sealed for automatic wave soldering
•2 Amp contacts
•Class B and F insulation available
•Life expectancy to 10 million operations
•UL, CUR file E43203
CONTACTS
Arrangement |
SPDT (1 Form C) |
|
|
|
|
|
|
Ratings |
Resistive load: |
|
|
Light Duty |
Max. switched power: |
30 W or 125 VA |
|
|
Max. switched current: |
1 A |
|
|
Max. switched voltage: |
150 VDC* or 300 VAC |
|
|
UL Rating: 1 |
A at 125VAC General Use |
|
|
1 |
A at 30 VDC Resistive |
|
Medium Duty |
Max. switched power: |
30 W or 250 VA |
|
|
Max. switched current: |
2 A |
|
|
Max. switched voltage: |
150 VDC* or 300 VAC |
|
|
UL Rating: 2 |
A at 125VAC General Use |
|
|
1 |
A at 30 VDC Resistive. |
|
Material |
Silver alloy |
|
|
|
|
|
|
Resistance |
< 100 milliohms initially |
|
|
|
|
|
|
COIL
Power |
|
At Pickup Voltage |
0.45W coil: 253 mW |
(typical) |
0.36W coil: 203 mW |
|
0.2W coil: 114 mw |
Max Continuous |
0.8 W at 20°C (68°F) ambient |
Dissipation |
0.6 W at 40°C (104°F) ambient |
Temperature Rise |
At nominal coil voltage: |
|
0.45W: 54°C (97°F) |
|
0.36W: 44°C (79°F) |
|
0.2W: 30°C (54°F) |
|
|
Max. Temperature |
105°C (221°F) |
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Other coil resistances and sensitivities available upon request.
4.Specifications subject to change without notice.
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
1 x 107 |
Electrical |
1 x 105 at rated load |
Operate Time (typical) |
5 ms at nominal coil voltage |
|
|
Release Time (typical) |
1 ms at nominal coil voltage |
|
(with no coil suppressions) |
|
|
Dielectric Strength |
1250 Vrms coil to contact |
(at sea level for 1 min.) |
750 Vrms between open contacts |
|
|
Insulation Resistance |
100 megohms min. at 20°C, 500 VDC |
|
|
Dropout |
Greater than 10% of nominal coil voltage |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
0.45W: -25°C (-13°F) to 55°C (131°F) |
|
0.36W: -25°C (-13°F) to 65°C (167°F) |
|
0.2W: -25°C (-13°F) to 75°C (167°F) |
Storage |
-25°C (-13°F) to 105°C (221°F) |
|
|
Vibration |
0.062" DA at 10–55Hz |
|
|
Shock |
15 g |
|
|
Enclosure |
P.B.T. polyester |
|
|
Terminals |
Tinned copper alloy |
|
|
Max. Solder Temp. |
270°C (518°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Max. Solvent Temp. |
80°C (176°F) |
|
|
Max. Immersion Time |
30 seconds |
|
|
Weight |
3.5 grams |
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-06-06