ZETTLER AZ699-1C-5DE, AZ699-1C-48DEA, AZ699-1C-48DE, AZ699-1C-24DEA, AZ699-1C-5DEA Datasheet

AZ699

SENSITIVE SUBMINIATURE RELAY

FEATURES

•Extremely small footprint utilizing only 0.22 square inch of PCB area

•Thin vertical profile only 0.196" wide

•6 Amp switching capability

•High sensitivity, 83 mW pickup

•Dielectric strength 4000 Vrms contact to coil

•Coils to 48 VDC

•Epoxy sealed for automatic wave soldering and cleaning

•Isolation spacing greater than 8 mm

CONTACTS

Arrangement	SPST (1 Form A)
	SPDT (1 Form C)
Ratings	Resistive load:
	Max. switched power: 150 W or 1500 VA
	Max. switched current: 6 A
	Max. switched voltage: 150* VDC or 400 VAC
	Note: If switching voltage is greater than 30 VDC, special
	precautions must be taken. Please contact the factory.
Material	Options:
	AgSnO2 (AgCdO)
	AgSnO2 with gold plating
Resistance	< 100 milliohms initially (AgSnO2, 24 V method)
	< 30 milliohms initially (AgSnO2, gold plated)

COIL

Power
At Pickup Voltage	83 mW
(typical)
Max. Continuous	1.2 W at 20°C (68°F) ambient
Dissipation
Temperature Rise	20°C (36°F) at nominal coil voltage
Temperature	Max. 105°C (221°F)

NOTES

1.All values at 20°C (68°F).

2.Relay may pull in with less than “Must Operate” value.

3.Minimum permissible contact load: AgSnO2 contact: 500 mA at 12 VDC AgSnO2 contact with gold plating: uW

4.Specifications subject to change without notice.

GENERAL DATA

Life Expectancy	Minimum operations
Mechanical	20 million operations
Electrical	1 X 105 at 6 A, 30 VDC or 250 VAC
Operate Time (typical)	5 ms at nominal coil voltage
Release Time (typical)	3 ms at nominal coil voltage
	(with no coil suppression)
Dielectric Strength	1000 Vrms between open contacts
(at sea level for 1 min.)	4000 Vrms contact to coil
	6000 V surge, contact to coil
Insulation	100 megohms min. at 20°C, 500 VDC,
Resistance	50% RH
Dropout	Greater than 10% of nominal coil voltage
Ambient Temperature	At nominal coil voltage
Operating	-40°C (-40°F) to 85°C (158°F)
Storage	-40°C (-40°F) to 105°C (221°F)
Vibration	0.062" DA at 10–55 Hz
Shock	10 g
Enclosure	P.B.T. polyester 94V-0
Terminals	Tinned copper alloy, P.C.
Max. Solder Temp.	260°C (500°F)
Max. Solder Time	5 seconds
Max. Solvent Temp.	80°C (176°F)
Max. Immersion Time	30 seconds
Weight	6 grams

ZETTLER electronics

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail] Telephone [phone] Fax [phone]

13/8/01