ZETTLER AZ822-2C-5DSE, AZ822-2C-48DSE, AZ822-2C-4.5DSE, AZ822-2C-24DSE, AZ822-2C-9DSE Datasheet

AZ822

SUBMINIATURE

DIP RELAY

FEATURES

•Low profile for compact board spacing

•DC coils to 48 VDC

•Life expectancy to 10 million operations

•Standard PC 0.1" grid terminal spacing

•Fits standard 16 pin IC socket

•Epoxy sealed for automatic wave soldering and cleaning

•Meets FCC Part 68.302 1500 V lightning surge

•Meets FCC Part 68.304 1000 V dielectric

•UL file E43203, CSA file 207803

CONTACTS

Arrangement	DPDT (2 Form C)
	Bifurcated crossbar contacts
Ratings	Resistive load:
	Max. switched power: 30 W or 62.5 VA
	Max. switched current: 1.25 A
	Max. switched voltage: 150 VDC or 250 VAC
	UL/CSA Rating: 1.25 A at 24 VDC
	0.4 A at 125 VAC
Material	AgNi, gold clad
Resistance	< 70 milliohms initially

COIL

Power
At Pickup Voltage	73 mW 3 - 12 V coils
(typical)	98 mW 24 V coils
	137 mW 48 V coils
Max. Continuous	0.84 W at 20°C (68°F)
Dissipation
Thermal Resistance	125 K/W (225 °F/W)
Temperature	Max. 100°C (212°F)

NOTES

1.All values at 20°C (68°F).

2.Relay may pull in with less than “Must Operate” value.

3.Relay adjustment may be affected if undue pressure is exerted on relay case.

4.Specifications subject to change without notice.

5.Ultrasonic cleaning is not recommended.

GENERAL DATA

Life Expectancy	Minimum operations
Mechanical	1 x 108
Electrical	5 x 105 at 1 A 30 VDC
Operate Time (typical)	5 ms at nominal coil voltage
Release Time (typical)	2 ms at nominal coil voltage
	(with no coil suppression)
Capacitance	Contact to contact: 2 pF
(max.)	Contact set to contact set: 2 pF
	Contact to coil: 4 pF
Bounce	At 10 mA contact current
(typical)	3 ms at operate N.O. side
	3 ms at operate N.C. side
Dielectric Strength	1000 Vrms contact to coil
(at sea level for 1 min.)	700 Vrms contact to contact
	700 Vrms between contact sets
Insulation Resistance	1000 megohms min. at 20°C, 500 VDC,
	50% RH
Dropout	Greater than 5% of nominal coil voltage
Ambient Temperature	At nominal coil voltage
Operating	-55°C (-55°F) to 85°C (185°F)
Storage	-55°C (-67°F) to 100°C (212°F)
Vibration	1.5 mm (.06″ ) DA at 10…58 Hz
	10 g at 58…500 Hz
Shock	10 g
Enclosure	P.B.T. polyester, UL-94:V-0
Terminals	Tinned copper alloy, P.C.
Max. Solder Temp.	270°C (518°F)
Max. Solder Time	5 seconds
Max. Solvent Temp.	55°C (131°F)
Max. Immersion Time	5 minutes
Weight	5 grams

ZETTLER electronics

Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [e-mail] Telephone [phone] Fax [phone]

2000-11-13