AZ763
12 A SPDT MINIATURE POWER RELAY
FEATURES
•Dielectric strength 5000 Vrms
•Low height: 15.7 mm
•Epoxy sealed version available
•12 Amp switching
•Isolation spacing greater than 10mm
•Proof tracking index (PTI/CTI) 250
•Surpasses requirements of VDE 0631/0700
•UL, CUR file E43203; VDE 112904
CONTACTS
Arrangement |
SPDT (1 Form C) |
|
||
|
SPST (N.O.) (1 Form A) |
|||
|
|
|
||
Ratings |
Resistive load: |
|
||
|
Max. switched power: |
360 W or 3000 VA |
||
|
Max. switched current: |
12 A |
||
|
Max. switched voltage: |
300* VDC or 400 VAC |
||
|
*Note: If switching voltage is greater than 30VDC, special |
|||
|
precautions must be taken. Please contact the factory. |
|||
|
|
|
|
|
Rated Load |
|
|
|
|
UL, CUR |
12 A at |
250 |
VAC general use |
|
VDE |
12 A at |
250 |
VAC |
|
|
|
|||
Material |
AgNi or AgNi gold plated |
|||
|
|
|
||
Resistance |
< 100 milliohms initially |
|
||
|
|
|
|
|
COIL
Power |
|
|
At Pickup Voltage |
200 mW |
|
(typical) |
|
|
Max. Continuous |
2.4 |
W at 20°C (68°F) ambient |
Dissipation |
2.1 |
W at 40°C (104°F) ambient |
Temperature Rise |
14°C (25°F) at nominal coil voltage |
|
|
|
|
Max. Temperature |
115°C (239°F) |
|
|
|
|
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Specifications subject to change without notice.
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
3 x 107 |
Electrical |
1 x 105 at 12 A 240 VAC res. |
Operate Time (typical) |
7 ms at nominal coil voltage |
|
|
Release Time (typical) |
3 ms at nominal coil voltage |
|
(with no coil suppression) |
|
|
Dielectric Strength |
5000 Vrms coil to contact |
(at sea level for 1 min.) |
1000 Vrms between open contacts |
|
|
Insulation |
105 megohms min. at 20°C |
Resistance |
500 VDC 50% RH |
|
|
Insulation |
B250 at 2 Form C, unsealed |
(according to |
C250 at other relay versions |
DIN VDE 0110, |
Overvoltage category: III |
IEC 60664-1) |
Pollution degree: 3 |
|
Nominal voltage: 250 VAC |
Dropout |
Greater than 10% of nominal coil voltage |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
-40°C (-40°F) to 85°C (185°F) |
Storage |
-40°C (-40°F) to 85°C (185°F) |
|
|
Vibration |
Break contacts: 5 g at 20…500 Hz |
|
Make contacts: 20 g at 30…500 Hz |
|
|
Shock |
30 g |
|
|
Enclosure |
P.B.T. polyester, UL-94 : V0 |
|
|
Terminals |
Tinned copper alloy, P.C. |
|
|
Max. Solder Temp. |
270°C (518°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Max. Solvent Temp. |
80°C (176°F) |
|
|
Max. Immersion Time |
30 seconds |
|
|
Weight |
14 grams |
|
|
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2001-02-01