`
AZ732
MINIATURE
POWER RELAY
FEATURES
Dielectric strength 4000 Vrms coil to contact Isolation spacing greater than 8mm
Double pole – Forms A, B and C available 10A switching
SLIMPACKTM version saves board space
Epoxy sealed version for automatic wave soldering and cleaning
Approvals/Standards include : UL, CSA, VDE, IEC, SEMKO and CEE
UL File E44211 ; CSA File LR85091 ; VDE 4120-4940-4002/A1
CONTACTS
Arrangement |
DPDT (2 Form C) |
|
Ratings |
Resistive load : |
|
|
Max switched power : 300W, 2770VA |
|
|
Max switched current : 10A, 51A for 2ms |
|
|
Max switched voltage : 150*VDC / 400VAC |
|
|
UL Rating : |
10A at 30VDC or 277VAC |
|
|
0.125HP 120VAC motor load |
|
*Note : If switching voltage is greater than 30VDC, special |
|
|
precautions must be taken. Please contact the factory. |
|
Material |
Silver cadmium oxide |
|
Resistance |
<30 miiliohms initially |
|
|
(at rated current, voltage drop method) |
|
|
|
|
COIL
Power |
|
At Pickup Voltage |
Standard coil 337mW |
(typical) |
Sensitive coil 250mW |
Max Continuous |
1.9W 20°C ambient |
Dissipation |
1.4W 40°C ambient |
Temperature Rise |
Standard 40°C at nominal coil voltage |
|
Sensitive 32°C at nominal coil voltage |
Max Temperature |
110°C |
|
|
NOTES
1.All values at 20°C
2.Relay may pull in with less than ‘Must Operate’ value
3.PCB layout viewed towards terminals
4.Unsealed relays should not be dip cleaned
5.Specifications subject to change without notice
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
30 million |
Electrical |
1x105 at10A 30VDC |
|
1x105 at 10A 115VAC |
Operate Time (typical) |
7ms at nominal coil voltage |
Release Time (typical) |
2ms at nominal coil voltage |
|
(with no coil suppression) |
Dielectric Strength |
4000 Vrms coil to contacts |
(at sea level for 1 min) |
2500 Vrms contact to contact |
|
1000 Vrms between open contacts |
Insulation Resistance |
10,000 megohms min at 20°C. 500VDC, |
|
50% RH |
Dropout |
Greater than 10% of nominal coil voltage |
Ambient Temperature |
At nominal coil voltage |
Operating |
Standard -55°C to 70°C |
Storage |
Sensitive -55°C to 80°C |
Both -55°C to 110°C |
|
Vibration |
0.062” DA at 10 – 55 Hz |
Shock |
20g |
Enclosure |
PBT polyester |
Terminals |
Tinned copper alloy, PC |
Weight |
20 grammes |
|
|
Logistic Design (UK) Limited
Unit 3 Eagle Centre Way, Sedgwick Road |
Tel +44 (0)1582 599 600 |
www.zettlerrelay.com |
Luton LU4 9US, United Kingdom |
Fax +44 (0)1582 599 700 |
sales@zettlerrelay.com |
LDZR201000