AZ723
MINIATURE
POWER RELAY
FEATURES
•AC coils
•Dielectric strength 5000 Vrms
•Low cost
•Flux tight package
•5 Amp switching - double pole contacts
•Isolation spacing greater than 8mm
•Molded materials: all 94V-0
•UL and Canadian file E43203
CONTACTS
Arrangement |
DPST (2 Form A) |
|
DPDT (2 Form C) |
|
|
Ratings |
Resistive load: |
|
Max. switched power: 150 W, 1250 VA |
|
Max. switched current: 5 A |
|
Max. switched voltage: 150 VDC/400 VAC |
|
Inductive load: (cosØ =0.4) |
|
Max. switched power: 90W or 500VA |
|
Max. Switched current: 5A |
|
Max. switched voltage: 125VDC or 400 VAC |
|
Note: If switching voltage is greater than 30 VDC, special |
|
precautions must be taken. Please contact the factory. |
|
|
Rated Load |
5 A 250 VAC, resistive |
UL, CUR |
5 A 30VDC resistive |
|
1/3 HP 240 VAC |
Min. Load |
5 VDC, .01A |
|
|
Material |
Silver alloy |
|
|
Resistance |
30 milliohms initially (6V, 1A method) |
COIL
Power |
|
|
At Pickup Voltage |
576 mW |
|
(typical) |
|
|
Max. Continuous |
1.5 |
W at 20°C (68°F) ambient |
Dissipation |
1.2 |
W at 40°C (104°F) ambient |
Temperature Rise |
36°C (97°F) at nominal coil voltage |
|
Temperature |
Max. 105°C (221°F) |
|
|
|
|
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Specifications subject to change without notice.
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
1 x 107 |
Electrical |
1 x 105 at rated load |
Operate Time (typical) |
8 ms at nominal coil voltage |
|
|
Release Time (typical) |
5 ms at nominal coil voltage |
|
(with no coil suppression) |
|
|
Dielectric Strength |
5000 Vrms coil to contact |
(at sea level for 1 min.) |
3000 Vrms between contact sets |
|
1000 Vrms between open contacts |
|
|
Insulation |
1000 megohms min. at 20°C, |
Resistance |
500 VDC 50% RH |
|
|
Dropout |
Greater than 30% |
|
of nominal coil voltage |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
-40°C (-40°F) to 70°C (158°F) |
Storage |
-40°C (-40°F) to 105°C (221°F) |
|
|
Vibration |
0.062" DA at 10–55 Hz |
|
|
Shock |
10 g |
|
|
Enclosure |
PC (94V-0) |
|
|
Terminals |
Tinned copper alloy, P.C. |
|
|
Max. Solder Temp. |
270°C (518°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Weight |
17 grams |
|
|
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
1998-10-28