AZ699
SENSITIVE SUBMINIATURE RELAY
FEATURES
•Extremely small footprint utilizing only 0.22 square inch of PCB area
•Thin vertical profile only 0.196" wide
•6 Amp switching capability
•High sensitivity, 83 mW pickup
•Dielectric strength 4000 Vrms contact to coil
•Coils to 48 VDC
•Epoxy sealed for automatic wave soldering and cleaning
•Isolation spacing greater than 8 mm
CONTACTS
Arrangement |
SPST (1 Form A) |
|
SPDT (1 Form C) |
|
|
Ratings |
Resistive load: |
|
Max. switched power: 150 W or 1500 VA |
|
Max. switched current: 6 A |
|
Max. switched voltage: 150* VDC or 400 VAC |
|
Note: If switching voltage is greater than 30 VDC, special |
|
precautions must be taken. Please contact the factory. |
|
|
Material |
Options: |
|
AgSnO2 (AgCdO) |
|
AgSnO2 with gold plating |
|
|
Resistance |
< 100 milliohms initially (AgSnO2, 24 V method) |
|
< 30 milliohms initially (AgSnO2, gold plated) |
|
|
COIL
Power |
|
At Pickup Voltage |
83 mW |
(typical) |
|
Max. Continuous |
1.2 W at 20°C (68°F) ambient |
Dissipation |
|
Temperature Rise |
20°C (36°F) at nominal coil voltage |
|
|
Temperature |
Max. 105°C (221°F) |
|
|
NOTES
1.All values at 20°C (68°F).
2.Relay may pull in with less than “Must Operate” value.
3.Minimum permissible contact load: AgSnO2 contact: 500 mA at 12 VDC AgSnO2 contact with gold plating: uW
4.Specifications subject to change without notice.
GENERAL DATA
Life Expectancy |
Minimum operations |
Mechanical |
20 million operations |
Electrical |
1 X 105 at 6 A, 30 VDC or 250 VAC |
Operate Time (typical) |
5 ms at nominal coil voltage |
|
|
Release Time (typical) |
3 ms at nominal coil voltage |
|
(with no coil suppression) |
|
|
Dielectric Strength |
1000 Vrms between open contacts |
(at sea level for 1 min.) |
4000 Vrms contact to coil |
|
6000 V surge, contact to coil |
|
|
Insulation |
100 megohms min. at 20°C, 500 VDC, |
Resistance |
50% RH |
|
|
Dropout |
Greater than 10% of nominal coil voltage |
|
|
Ambient Temperature |
At nominal coil voltage |
Operating |
-40°C (-40°F) to 85°C (158°F) |
Storage |
-40°C (-40°F) to 105°C (221°F) |
|
|
Vibration |
0.062" DA at 10–55 Hz |
|
|
Shock |
10 g |
|
|
Enclosure |
P.B.T. polyester 94V-0 |
|
|
Terminals |
Tinned copper alloy, P.C. |
|
|
Max. Solder Temp. |
260°C (500°F) |
|
|
Max. Solder Time |
5 seconds |
|
|
Max. Solvent Temp. |
80°C (176°F) |
|
|
Max. Immersion Time |
30 seconds |
|
|
Weight |
6 grams |
|
|
ZETTLER electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
13/8/01