Use, Care, and Installation Guide
www.zephyronline.com
Venezia
ZVE-E30S
ZVE-E36S
ZVE-E42S
Model number:
Serial number:
MAY07.0101 © Zephyr Corporation.
www.zephyronline.com
SAFETY NOTICE .............................................. |
2 |
LIST OF MATERIALS ....................................... |
3 |
INSTALLATION |
|
Ducting Calculation Sheet ............................... |
4 |
Mounting Height and Clearance ..................... |
5 |
Ducting .................................................................. |
6 |
Specifications ....................................................... |
7 |
Mounting the Hood and Duct Cover................ |
8 |
Ductless Recirculating ........................................ |
9 |
FEATURES & CONTROLS |
|
Touch Controls & Features ................................. |
10 |
Charcoal Filter Change Indicator ...................... |
11 |
Metal Filter Clean Indicator ................................ |
12 |
MAINTENANCE |
|
Cleaning ................................................................. |
13 |
Lights ....................................................................... |
14 |
TROUBLE SHOOTING ...................................... |
15 |
LIST OF ACCESSORIES/PARTS ....................... |
16 |
Table of Contents
1
Important safety Notice
READ AND SAVE THESE INSTRUCTIONS |
www.zephyronline.com |
|
WARNING
TO RE DUCE TH E R IS K O F FIR E O R E LE C TR IC SHOC K, DO NOT US E TH IS FAN W ITH ANY S O LID-S TATE
SP E E D C O NTRO L DEV IC E.
WARNING
TO RE DUCE TH E R IS K O F FIR E, E LE C TR IC SH O C K, O R INJU RY TO P E R SON S, O B S E RVE TH E FO LLOW ING:
a.Use this unit only in the manner intended by the manufacturer, If you have questions, contact the manufacturer.
b.Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
When the service disconnecting means cannot be locked, securely fasten a prominentwarning device, such as tag, to the service panel.
CAUTION
For General VentilatingUse Only. Do not Use to Exhaust Hazardous or Explosive Materials and Vapors.
Take care when using cleaning agents or detergents.Suitable for use in household cooking area.
WARNING
TO REDUC E TH E R IS K O F A RA NG E TO P GR E AS E FIR E:
a. Never leave surface units unattendedat high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or mediumsettings.
b.Always turn hood ON when cooking at high heat or when cooking flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambe)
c.Clean ventilatingfans frequently. Grease should not be allowed to accumulate on fan or filter.
d.Use proper pan size. Always use cookware appropriatefor the size of the surface element.
WARNING
TO RE DUC E TH E R IS K O F INJURY TO PERSONS IN TH E EV E NT O F A RA NG E TO P G R EAS E FIR E, O B S E RVE TH E FO LLOW ING :
a. SM OTHE R FLA MES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. B E CARE FUL TO P R EV E NT BUR NS. If the flames do not go out immediately,E VACUATE AND CALL TH E FIR E DE PARTME NT.
b. NEV E R PIC K UP A FLAMI NG PAN - You may be burned.
c. DO NOT US E WATE R, includingwet dishcloths or towels - a violentsteam explosion will result.
d.Use an extinguisher ONLY if:
1.You know you have a class AB C extinguisher, and you already know how to operate it.
2.The fire is small and contained in the area where it started.
3.The fire departmentis being called.
4.You can fight the fire with your back to an exit.
5.Based on “Kitchen Fire Sa fety Tips” published by NFPA.
WARNING
TO R E DUC E TH E R IS K O F FIR E, E LE C TR IC SHOCK O R INJURY TO PER SONS, O B S E RVE TH E FO LLOW ING :
a.Installation Work and Electrical Wiring Must be Done by Qualified Person (s) In Accordance with all Applicable Codes and Standards, IncludingFire-Rated Construction.
b.Sufficient air is needed for proper combustionand exhausting of gases throughthe flue (chimney) of fuel burningequipmentto prevent back drafting. Follow the heating equipmentmanufacturer’s guideline and safety standards such as those published by the National Fire Protection
Association (NFPA), and the American S ociety for Heating, Refrigeration, and Air ConditioningEngineers (AS HR AE) and the local code authorities.
c.When cutting or drillinginto wall or ceiling, do not damage electrical wiring and other hidden utilities.
d.Ducted fans must always vent to the outdoors.
WARNING
TO REDUC E TH E R IS K O F FIR E, USE O NLY ME TAL DUC TW O R K.
CAUTION
To reduce risk of fire and to properlyexhaust air, be sure to duct air outside - Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces or garages.
WARNING
TO REDUCE THE RISK OF SHOCK, THIS FAN MUST BE INSTALLED WITH AN ISOLATING WALL CONTROL/SWITCH.
2
1 - Hood
2 - Metallic filters (3 - ZVE-E36, E42)
2 - Halogen light bulbs (4 - ZVE-E36, E42) 1 - Duct cover assembly (2 pieces)
1 - Hardware bag
1 - Duct cover mounting bracket
1 - Packet of mounting screws w/anchors
1 - Butterfly damper
NO DUCTING IS INCLUDED
* Note: Zephyr recommends using 50LB EZ anchors if mounting hood onto drywall. These are not provided. but are readily available of most hardware stores.
List of Materials
3
www.zephyronline.com
Installation - Ductwork Calculation Sheet
Duct pieces |
Equivalent number |
Total |
|||
|
length x used |
|
= |
||
3 1/4” x 10” |
1 Ft. |
x ( |
) |
= |
Ft. |
Rect., |
|
|
|
|
|
straight |
|
|
|
|
|
7” Round, |
1 Ft. |
x ( |
) |
= |
Ft. |
straight |
|
|
|
|
|
7” Round, |
1 Ft. |
x ( |
) |
= |
Ft. |
straight |
|
|
|
|
|
3 1/4” x 10” |
15 Ft. |
x ( |
) |
= |
Ft. |
Rect. 90 0 |
|
|
|
|
|
elbow |
|
|
|
|
|
3 1/4” x 10” |
9 Ft. |
x ( |
) |
= |
Ft. |
Rect. 45 0 |
|
|
|
|
|
elbow |
|
|
|
|
|
3 1/4” x 10” |
24 Ft. |
x ( |
) |
= |
Ft. |
Rect. 90 0 |
|
|
|
|
|
flat elbow |
|
|
|
|
|
3 1/4” x 10” |
30 Ft. |
x ( |
) |
= |
Ft. |
Rect. |
|
|
|
|
|
wall cap |
|
|
|
|
|
with damper |
|
|
|
|
|
3 1/4” x 10” |
5 Ft. |
x ( |
) |
= |
Ft. |
Rect. to |
|
|
|
|
|
6” round |
|
|
|
|
|
transition |
|
|
|
|
|
3 1/4” x 10” |
15 Ft. |
x ( |
) |
= |
Ft. |
Rect. to |
|
|
|
|
|
6” round |
|
|
|
|
|
transition |
|
|
|
|
|
90 0 elbow |
|
|
|
|
|
6” Round, |
15 Ft. |
x ( |
) |
= |
Ft. |
90 0 elbow |
|
|
|
|
|
6” Round, |
9 Ft. |
x ( |
) |
= |
Ft. |
45 0 elbow |
|
|
|
|
|
|
Subtotal column 1 = |
Ft. |
Maximum Duct Length: For satisfactory air movement, the total duct length of a 3 1/4” x 10” rectangular, 6” or 7” diameter round ductshould not exceed 100 equivalent feet.
Duct pieces |
Equivalent number |
Total |
|||
|
length x used |
|
= |
||
6” Round |
30 Ft. |
x ( |
) |
= |
Ft. |
wall cap |
|
|
|
|
|
with damper |
|
|
|
|
|
6” Round, |
30 Ft. |
x ( |
) |
= |
Ft. |
roof cap |
|
|
|
|
|
6” round to |
1 Ft. |
x ( |
) |
= |
Ft. |
3 1/4” x 10” |
|
|
|
|
|
rect. |
|
|
|
|
|
transition |
|
|
|
|
|
6” round to |
16 Ft. |
x ( |
) |
= |
Ft. |
3 1/4” x 10” |
|
|
|
|
|
rect. |
|
|
|
|
|
transition |
|
|
|
|
|
90 0 elbow |
|
|
|
|
|
7” Round, |
15 Ft. |
x ( |
) |
= |
Ft. |
90 0 elbow |
|
|
|
|
|
7” Round, |
9 Ft. |
x ( |
) |
= |
Ft. |
45 0 elbow |
|
|
|
|
|
7” Round |
30 Ft. |
x ( |
) |
= |
Ft. |
wall cap |
|
|
|
|
|
with damper |
|
|
|
|
|
7” Round, |
30 Ft. |
x ( |
) |
= |
Ft. |
roof cap |
|
|
|
|
|
7” round to |
8 Ft. |
x ( |
) |
= |
Ft. |
3 1/4” x 10” |
|
|
|
|
|
rect. |
|
|
|
|
|
transition |
|
|
|
|
|
7” round to |
15 Ft. |
x ( |
) |
= |
Ft. |
3 1/4” x 10” |
|
|
|
|
|
rect. |
|
|
|
|
|
transition |
|
|
|
|
|
90 0 elbow |
|
|
|
|
|
|
Subtotal column 2 = |
Ft. |
|||
|
Subtotal column 1 = |
Ft. |
|||
|
Total ductwork |
= |
Ft. |
4