ZRC9000
ZRC-9000 Recirculating Kit Instructions
For Use With AK9028AS and AK9034AS
1. Remove baffle filter from insert and position
it back-side up so the mesh is visible.
3. Place filter brackets over charcoal filter and
secure in place by tucking each end of
the bracket under the baffle filter frame.
Re-install baffle filter into insert.
NOTE: Take care when installing the filter brackets as they may have sharp edges
2. Place charcoal filter on back-side of baffle
filter so it fully covers the mesh.
THIS KIT INCLUDES:
1
(1) return air vent (1) charcoal filter (3) charcoal filter
brackets.
(4) return air
vent screws
Turn to next page for instructions
on installing return air vent.
WARNING: Charcoal filter is not
meant to be washed and must be
replaced after 3 - 4 months of use.
Replacement Part: Z0F-C090
JAN12.0101 www.zephyronline.com | 1.888.880.8368
frame
mesh
Loading...