REMOTE MANUAL
Product Type: Universal IR Remote Model Line: ZEN100-700 (all) Product Year: 1999/2000
Manual Part #: Electronic Version Only
NOTE: This manual was designed to help you program your Zenith Remote Control. If you need the complete Operating Guide for your Zenith Product, please contact Zenith National Parts Sales at 888-3-ZENITH (888-393- 6484, Mon-Fri 7-8 CST, Sat 8-5 CST).
Models:
All ZEN
Model Remotes
ZEN100
ZEN300
ZEN350
ZEN400
ZEN425
ZEN450
ZEN525
ZEN700
ZEN725
ZENDTV
CONTENTS |
|
Remote Description ....................................... |
2 |
Programming Instructions .............................. |
3 |
Programming Codes ....................................... |
6 |
More Information ........................................ |
10 |
Published by Technical Publications Zenith Electronics Corporation
201 James Record Road - Huntsville, Alabama 35824-1513
Copyright June 2000 by Zenith Electronics Corporation
ZEN UNIVERSAL REMOTE CONTROL
NOTE: Your ZEN model remote may not look exactly like the one below, but all functions for the ZEN models are similar. The descriptions below refer to using the remote with Zenith products, non-Zenith products may behave differently.
INDICATOR LIGHT
Lights when buttons are pressed.
CODE SEARCH
Used to program the remote or to search through codes.
MUTE
Turns sound off and on while picture remains.
CHANNEL (Up/Down)
Selects next channel in TV’s memory. Press and hold to repeat.
NUMBER PAD
Selects channels directly.
ENTER
Shows Channel/Time, enters channel, or removes any on-screen menus.
A
Multifunction Button.
Turns Surf Channel On/Off.
When on, the Channel Up/Down keys only "Surf" through channels selected in the Add/Del/Surf Menu.
MENU
Displays menus for TV and other options.
LEFT/RIGHT ARROWS
Chooses and shows the desired menu option.
C
Multifunction Button. Usually turns PIP on/off.
|
|
|
|
|
|
|
POWER |
|
|
|
|
VCR |
CBL |
|
AUX |
|
|
|
|
|
|
||
|
|
TV |
|
|
AUX1 |
||
|
|
|
|
H |
N |
+ |
|
|
|
|
|
CHA |
P |
||
|
|
|
|
C |
|
|
|
|
|
|
|
R |
|
|
E |
|
|
|
|
A |
|
|
R |
|
|
|
|
|
|
V |
|
|
|
|
|
E |
|
|
|
|
|
|
S |
|
|
C |
|
|
|
E |
|
|
|
A |
|
|
D |
|
|
|
|
H |
|
|
|
|
|
|
N |
||
C |
O |
|
|
|
|
|
|
- |
|
|
M |
|
V |
||
O |
|
|
|
O |
|||
L |
|
|
|
|
|||
|
|
|
|
|
|
|
L |
V |
|
|
|
+ |
|||
|
|
|
|
|
CHAN- |
|
|
|
|
|
|
1 |
2 |
|
3 |
|
|
|
|
4 |
5 |
|
6 |
|
|
|
|
7 |
8 |
|
9 |
|
|
|
ENTER |
0 |
|
TV/VCR |
|
|
|
|
|
A |
|
|
B |
|
|
M |
|
|
|
Q |
|
|
|
e |
|
|
|
u |
|
|
|
n |
|
|
|
i |
|
|
|
u |
|
|
|
t |
|
|
|
|
|
C |
|
|
cc |
|
|
|
|
REW |
PLAY |
F.FWD |
|
RECORD STOP PAUSE
POWER
Turns the active component on and off (see mode).
MODE
Sets which audio/video component the remote will control.
PREV CHANNEL
Returns to previous Channel.
VOLUME (Left/Right)
Increases TV’s sound level.
TV/VCR SOURCE
Steps through source options.
B
Multifunction Button.
Usually PIP Channel. Toggles the channel button operation between PIP screen and full screen.
QUIT
Exits from on-screen display, turns the sound enhancement feature on or off, and freezes the PIP Screen.
UP & DOWN ARROWS
Moves highlighted bar within menu to select an option.
CC
Displays closed caption options menu.
MEDIA CONTROLS
Controls VCR, DVD, CD, TAPE, etc. media functions. These buttons
will control the VCR when TV
or VCR is the active component.
ZEN UNIVERSAL
REMOTE
ZENITH REMOTE MANUAL |
2 |
ZEN SERIES |
ZEN REMOTE PROGRAMMING
BATTERY INSTALLATION
Your Universal Remote requires two AAA alkaline batteries. To install the batteries:
1.On the back of the remote, push down on the tab and lift the cover off.
2.Match the batteries to the + and - marks inside the battery case, then insert the batteries.
3.Press the battery cover back into place.
BATTERY SAVER
Your Zenith remote will automatically “time-out” if the keys are depressed more than two minutes. This will save your batteries should your remote get stuck in a place where the keys remain depressed (e.g., between the sofa cushions).
CODE SAVER
You will have no more than 90 seconds to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are secured in the remote. If buttons are pressed without batteries in the remote, all codes will be lost.
GLOW KEYS
Glow Keys must be exposed to light in order for the keys to glow in the dark. The longer the exposure to light, the longer they will glow. Do not place in Direct Sunlight. Natural day light or light from a Filament lamp or fluorescent Lamp is sufficient to recharge the glow material.
BUTTON FUNCTIONS
Some buttons on the remote control might have functions that are referred to by different names on your product. For example, “Prev Ch” may be the same as “RECALL” on your remote. Differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. For example, your product must be equipped with “Prev Ch” ability for the “Prev Ch” button to operate this feature.
Note: The REC button must be pressed TWICE to record from your VCR. For Zenith brand VCRs, press the REC button once, then press it again for three seconds.
PROGRAMMING TVS
NOTE: If your remote deosn’t have a CODE SEARCH button (ZEN300 for example), use the Remotes With No Code Search instructions at the end of this section.
1.Manually turn on the TV.
2.Press and hold the CODE SEARCH button until the Indicator Light lights, then release the CODE SEARCH button.
3.Press and release the TV button (the Indicator Light will blink and then remain lit).
4.Find the three digit code for your TV in the code list in this booklet and enter it using the Number Buttons. After your code is entered, the Indicator will turn off.
Note: If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Recheck the code list and try again.
5.Now check to see if the correct code was entered. With your TV on, press some of the buttons. If the TV responds correctly to each of the buttons, no further programming is required.
Note: If some buttons do not operate your equipment, try one of the other codes or our brand.
6. Write down the code for future reference.
PROGRAMMING VCRS
1.Manually turn on the VCR.
2.Press and hold the CODE SEARCH button until the Indicator Light lights, then release the CODE SEARCH button.
3.Press and release the VCR button (the Indicator Light will blink and then remain lit).
4.Find the three digit code for your VCR in the code list and enter it using the Number Buttons. After your code is entered, the Indicator will turn off.
Note: If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Recheck the code list and try again.
5.Now check to see if the correct code was entered. With your TV on, press some of the buttons. If the VCR responds correctly to each of the buttons, no further programming is required.
Note: If some buttons do not operate your equipment, try one of the other codes for your brand.
6. Write down the code for future reference.
Note: The REC button must be pressed TWICE to record from your VCR. For Zenith brand VCRs, press the REC button once, then press it again for three seconds.
ZENITH REMOTE MANUAL |
3 |
ZEN SERIES |
Loading...