Zenith VRB412, VRB421C, VRB211, VRB411 OPERATING GUIDE

0 (0)

VRB421 1UZ1

machine numbers | VRB211 | VRB411 | VRB412 | VRB421

As an ENERGY STAR® Partner, Zenith Electronics Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

o p e r a t i n g g u i d e / w a r r a n t y

VRB421 1UZ1

RECORD YOUR MODEL NUMBER (Now, while you can see it)

The model and serial number of your new VCR are located on the back of the VCR cabinet. For your future convenience, we suggest that you record these numbers here:

MODEL NO.____________________________________

SERIAL NO.____________________________________

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

POWER CORD POLARIZATION:

CAUTION: To Prevent Electric Shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

NOTE TO CABLE/TV INSTALLER:

This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

REGULATORY INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product.

This class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

“Ce appareil numérique de la class b respecte toutes les exigences du Règulement sur le matériel brouillier du Canada.”

Zenith is a trademark of ZEC © Copyright Zenith Electronics Corporation 1999

VRB421 1UZ1

SAFETY TIPS P A G E 3

IMPORTANT SAFETY INSTRUCTIONS

These simple precautions will help ensure that you get many years of safe enjoyment from your new product.

1.Read Instructions

Read all of the safety and operating instructions before operating the product.

2.Retain Instructions

Keep all safety and operating instructions for future reference.

3.Heed Warnings

Follow warnings on the product and in the operating guide.

4.Follow Instructions

Follow all operating and use instructions.

5.Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments

Do not use attachments not recommended by product manufacturer as they may cause hazards.

7.Water and Moisture

Do not use this product near water—for example, near a bathtub, wash bowl, sink, or laundry tub, in a wet basement, or near a swimming pool.

8.Accessories

Do not place product on an unstable cart, stand, tripod, bracket, or table. Product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any mounting of product should follow manufacturer’s instructions and should use a mounting accessory recommended by manufacturer.

9.Transporting Product

Move product and cart combinations

with care. Quick stops, excessive force, and uneven surfaces may cause product and cart combination to overturn.

10.Ventilation

Slots and openings in cabinet must not be blocked or covered. They are provided for ventilation, to ensure reliable operation, and to protect from overheating. Never block openings by placing product on a bed, sofa, rug, or other similar surface. Do not place product in built-in installation such as a bookcase or rack unless proper ventilation is provided or manufacturer’s instructions have been adhered to.

11.Power Sources

Operate product only from type of power source indicated on marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power or other sources, refer to manual.

12.Line-Cord Polarization

Product is equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). As a safety feature, this plug will fit into power outlet only one way. If you’re unable to insert plug fully into outlet, try reversing the plug. If plug still fails to fit, contact an electrician to replace your obsolete outlet. Do not defeat safety purpose of polarized plug.

13.Power-Cord Protection

Route power-supply cords so they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from product.

14.Outdoor Antenna Grounding

If an outside antenna or cable system is connected to this product, be sure antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code (USA), ANSI/NFPA 70 provides information on grounding of mast and supporting structure, grounding of lead-in wire to an antenna discharge unit connection to grounding electrodes, and requirements for grounding electrode. ( See Fig. 1 below. )

Fig. 1

Antenna Lead-in Wire

Ground

Clamp

Antenna Discharge Unit

NEC Section 810-20

Grounding Conductors

Electric Service NEC Section 810-21

Equipment

Ground Clamps

Power Service Grounding

Electrode System

NEC Art 250, Part H

NEC: National Electrical Code

Antenna grounding per NEC Code, ANSI/NFPA 70

VRB421 1UZ1

P A G E 4 SAFETY TIPS

IMPORTANT SAFETY INSTRUCTIONS

These simple precautions will help ensure that you get many years of safe enjoyment from your new product.

15.Lightning

For added protection for this product during a lightning storm, or when product is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect antenna or cable system. This will prevent damage to product due to lightning and power line surges.

16.Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits, as contact with them might be fatal.

17.Overloading

Do not overload wall outlets, extension cords or integral convenience receptacles, as this can result in risk of fire or electric shock.

18.Object and Liquid Entry

Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on product.

19.Servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20.Wall or Ceiling Mounting

Mount product to wall or ceiling only as recommended by manufacturer.

21.Replacement Parts

When replacement part(s) are required, be sure service technician has used replacement part(s) specified by manufacturer or have same characteristics as original part(s). Unauthorized substitutions may result in fire, electric shock, or other hazards.

22.Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualified service personnel under these conditions:

a.If power-supply cord or plug is damaged.

b.If liquid has been spilled or objects have fallen into product.

c.If product has been exposed to rain or water.

d.If product doesn’t operate normally by following handbook instructions. Adjust only those controls covered by handbook instructions; improper adjustment of other controls may result in damage and often requires extensive work by a qualified technician to restore product to normal operation.

e.If product has been dropped or cabinet has been damaged.

f.If product exhibits a distinct change in performance.

23.Heat

Keep product away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

24.Safety Check

Upon completion of any service or repairs to this product, ask service technician to perform safety checks to determine that product is in proper operating condition.

VRB421 1UZ1

I N S TA L L AT I O N

P A G E 5

 

 

Contents/Index

CONTENTS

SAFETY TIPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

VCR Features Chart . . . . . . . . . . . . . . . . . . . . . . . . 6 Connections for Your VCR . . . . . . . . . . . . . . . . . . 7-8 Before you operate your VCR . . . . . . . . . . . . . . . 9-12

CONTROLS AND DISPLAYS . . . . . . . . . . . . . . . . . . 13-14

Front Panel Diagram . . . . . . . . . . . . . . . . . . . . . . 13

VCR Status Displays . . . . . . . . . . . . . . . . . . . . . . 14

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-27

The Buttons on Your Remote . . . . . . . . . . . . . . . . 15 Clock Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Timer Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Audio Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Watching TV Through the VCR . . . . . . . . . . . . . . . . 20 Camcorder Connected to VCR . . . . . . . . . . . . . . . . 21 Playing Tapes . . . . . . . . . . . . . . . . . . . . . . . . 22-23 Instant Recording . . . . . . . . . . . . . . . . . . . . . 24-26 Recording While You’re Away . . . . . . . . . . . . . . . . 27

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . 28-30 SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . 31

INDEX

Audio Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Auto Channel Search . . . . . . . . . . . . . . . . . . . . . .11, 18 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8, 21 Channel Add/Del . . . . . . . . . . . . . . . . . . . . . . . .11, 18 Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 16 Features Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Front Panel Diagram . . . . . . . . . . . . . . . . . . . . . . . .13 Instant Recording . . . . . . . . . . . . . . . . . . . . . . . .24-26 Language Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Main Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Playing Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 SpeakEZ Function . . . . . . . . . . . . . . . . . . . . . . . . . .10 Timer Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Timer-Controlled Recording . . . . . . . . . . . . . . . . . . . .27 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .28-30 VCR Status Displays . . . . . . . . . . . . . . . . . . . . . . . . .14 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Watching TV through the VCR . . . . . . . . . . . . . . . . . .20

VRB421 1UZ1

P A G E 6

 

I N S TA L L AT I O N

 

 

 

 

VCR Features Chart

This page shows the features of your VCR and the differences between the models.

FEATURES

VRB211

VRB411

VRB412

VRB421

 

 

 

 

 

SpeakEZ Function

English

English

English/Spanish

English

 

 

 

 

 

2-Heads

X

N/A

N/A

N/A

 

 

 

 

 

4-Heads (Special Video Effects)

N/A

X

X

X

 

 

 

 

 

Full Load/Quick Start

X

X

X

X

 

 

 

 

 

Auto Head Cleaner

X

X

X

X

 

 

 

 

 

Audio System

Monaural

Monaural

Monaural

MTS Hi-Fi Stereo

 

 

 

 

 

Audio/Video (A/V) Jacks

Monaural

Monaural

Monaural

Stereo

 

 

 

 

 

Remote Control SC411Z

X

X

X

X

 

 

 

 

 

Auto/Manual Band Select

X

X

X

X

 

 

 

 

 

Auto/Manual Channel Search

X

X

X

X

 

 

 

 

 

Channel Capability (CATV & TV)

181

181

181

181

 

 

 

 

 

Record Speeds SP/EP

X

X

X

X

 

 

 

 

 

Playback Speeds SP/LP/EP

X

X

X

X

 

 

 

 

 

Auto Playback System

X

X

X

X

 

 

 

 

 

Auto/Manual Digital Tracking

X

X

X

X

 

 

 

 

 

Instant Recording

X

X

X

X

 

 

 

 

 

Timer-Controlled Recording

X

X

X

X

 

 

 

 

 

Auto Playback Tape Speed Adjust

X

X

X

X

 

 

 

 

 

Forward/Reverse Slow-Motion

 

X

X

X

Video (4-head VCR)

N/A

Variable

Variable

Variable

 

 

1/10 to 1/32

1/10 to 1/32

1/10 to 1/32

 

 

 

 

 

Pause/Still Video

Noise

Clear

Clear

Clear

 

 

 

 

 

Real-Time Tape Counter

X

X

X

X

 

 

 

 

 

Speed Search

X

X

X

X

 

 

 

 

 

CM Skip

X

X

X

X

 

 

 

 

 

English/Spanish/French Menus

X

X

X

X

 

 

 

 

 

1-Year, 8-Event Timer

X

X

X

X

 

 

 

 

 

LED Clock Front Panel Indicator

X

X

X

X

 

 

 

 

 

Auto Clock Set System

X

X

X

X

 

 

 

 

 

Hook-up Cable (VCR to TV)

X

X

X

X

 

 

 

 

 

Energy Saving

X

X

X

X

 

 

 

 

 

1.Model VRB421 is used for the description, operation, and details provided in this operating guide.

2.VCR design and specifications are subject to change without prior notice.

X = Feature is provided

N/A = Feature is Not Available

VRB421 1UZ1

I N S TA L L AT I O N

 

P A G E 7

 

Connections for your VCR

Required connections for your VCR.

Connections Without a Cable Box

Back Panel of Stereo VCR

 

 

 

ANT

 

R-AUDIO-L VIDEO

IN

 

 

 

OUT

OUT

VHF/UHF/CATV

CH3 CH4

IN

 

OUT

IN

TO

 

 

 

 

TV

This cable is provided with your VCR.

Antenna

Flat Wire (300 ohm)

300/75 ohm Adaptor

(Not provided)

OR

OR

Cable TV

Back Panel of Typical TV

Wall Jack

 

IN

IN

 

 

 

 

VHF/UHF/CATV

 

OUT

OUT

 

 

R AUDIO L

VIDEO

ANT

 

 

 

IN

Turn off power or unplug VCR before making any connections.

Connections With a Cable Box

Back Panel of Stereo VCR

 

Back Panel of Typical TV

 

 

 

ANT

IN

IN

 

 

 

 

 

 

VHF/UHF/CATV

 

R-AUDIO-L

VIDEO

IN

 

 

 

 

OUT

OUT

ANT

 

 

 

R

AUDIO L

VIDEO

 

OUT

OUT

IN

 

VHF/UHF/CATV

 

 

CH3 CH4

IN

 

OUT

 

 

 

IN

TO

 

 

 

 

 

 

 

 

 

 

TV

 

 

 

Back Panel of

Typical Cable Box Cable TV

Wall Jack

CH3 CH4

CABLE

OUT IN

Turn off power or unplug VCR before making any connections.

This cable is provided with your VCR.

Zenith VRB412, VRB421C, VRB211, VRB411 OPERATING GUIDE

VRB421 1UZ1

P A G E 8

I N S TA L L AT I O N

 

 

Connections for your VCR

Optional connections for your VCR.

Audio/Video (A/V) Connections to TV

Use A/V connections for a better picture.

Back Panel of Stereo VCR

 

 

 

ANT

 

R-AUDIO-L VIDEO

IN

 

 

 

OUT

OUT

VHF/UHF/CATV

CH3 CH4

 

 

OUT

IN

IN

TO

 

 

 

 

TV

A/V cable is not provided with VCR.

Back Panel of Monaural VCR

ANT

IN

AUDIO VIDEO

OUT VHF/UHF/CATV

CH3 CH4

 

OUT

IN

TO

 

 

 

TV

A/V cable is not provided with VCR.

Accessory Audio/Video (A/V) Connections to VCR

Back Panel of Stereo VCR

 

 

 

ANT

 

R-AUDIO-L VIDEO

IN

 

 

 

OUT

OUT

VHF/UHF/CATV

CH3 CH4

 

 

OUT

IN

IN

TO

 

 

 

 

TV

Back Panel of Typical TV

OUT

OUT

VHF/UHF/CATV

 

IN

IN

 

R-AUDIO-L

VIDEO

ANT

 

 

IN

Turn off power or unplug VCR before making any connections.

Back Panel of Typical Monaural TV

AUDIO VIDEO

OUT

VHF/UHF/CATV

 

IN

 

 

ANT

 

IN

Note: If the back panel on your TV is different, refer to the TV’s operating guide.

 

Accessory

 

Component:

 

Another VCR,

 

Camcorder,

 

Video Camera,

Jack panel of Accessory

Satellite Receiver,

Laser Disc Player

OUT OUT

IN

IN

R-AUDIO-L VIDEO

Turn off power or unplug VCR before making any connections.

A/V cable is not provided with VCR.

VRB421 1UZ1

I N S TA L L AT I O N

 

P A G E 9

 

Before you operate your VCR

Things you must do before you can operate your VCR.

CLOCK MENU

PROGRAM

1

 

MONTH :

 

 

 

 

 

 

DAY

:

 

 

AUTO CLOCK SET(ON):

1

 

 

 

 

START

:

 

 

MANUAL CLOCK SET :

2

 

STOP

:

 

 

 

 

 

CHANNEL :

 

 

 

SPEED

:

 

 

 

 

REPEAT:

Press number keys

(1 - 8) to select program

QUIT = exit

ENTER to adjust program

SETUP MENU

 

AUTO PROGRAM:

 

1

CH. ADD/DEL:

2

SOURCE:

3

ON-SCREEN DISPLAY:

4

LANGUAGE SELECT:

5

Press number keys

QUIT = exit

AUDIO MENU

SpeakEZ: ON 1 ON 2 OFF

PLAYBACK: HI-FI

RECORD: STEREO

Press number keys

then ENTER QUIT = exit

CLOCK

TIMER

SETUP

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

Press NUMBER (1, 2,

3,

4) button

Audio menu’s PLAYBACK and

 

 

 

 

 

 

 

 

 

 

SpeakEZ

 

 

RECORD options are available only

 

 

CLOCK

:

 

 

with stereo VCRs.

1

 

 

 

TIMER

:

2

 

 

 

 

 

SETUP

:

3

 

 

 

 

 

AUDIO

:

4

 

 

 

Press number keys

QUIT = exit

MAIN MENU

How to Access Menus

Menu operation is easy—just follow the instructions shown at the bottom of the menu.

1.Press MENU to see main menu.

2.Press NUMBER (1, 2, 3, or 4) to see desired sub menu to be used.

Point remote toward VCR

power

 

 

eject

sp/ep

ch

 

quit

 

menu

enter

ch

memory

3.Press NUMBER to choose desired option to be changed.

4.Press QUIT to exit menu, or wait a few minutes and the VCR returns to normal operation.

pause

rew play

s top

rec/itr

1 2

4 5

7 8

tv/vcr

0

trk

Note:

Perform menu operations with the VCR and TV on, and tune the TV to channel 3 or 4. The VCR must also be in the VCR mode of operation. Press the TV/VCR button repeatedly until VCR indicator light appears in the front panel.

VRB421 1UZ1

P A G E 1 0

I N S TA L L AT I O N

 

 

Before you operate your VCR

Things you must do before you can operate your VCR.

1

 

Connect the Power

 

(Required) Plug your VCR into an unswitched

 

 

 

 

120 Vac, 60 Hz household power outlet. Turn on

 

 

the VCR by pressing the POWER on the remote

 

 

or on the VCR’s front panel. While plugged into

 

 

an AC outlet, the VCR consumes 3W of electrical

 

 

power in OFF condition.

 

 

 

 

 

 

Do not plug the VCR into a switched power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

outlet. Otherwise, when the power is

 

 

 

 

 

 

switched off, the VCR turns off. You may

 

 

 

 

 

 

then have to reset the time and date, and

 

 

 

 

 

 

reprogram operational features.

 

 

 

 

 

 

 

WALL

SWITCH

POWER

OUTLET

TYPICAL ZENITH VCR

power stop/eject

rew

play

f fwd

pause

sp/ep

ch

rec/itr

 

AM

VCR

PM

REC

TMR

2

3

4

Set Position of the CH3/CH4 Switch

(Required) The CH3/CH4 switch on the VCR’s back panel determines which channel the VCR uses to send video signals to your TV. The TV must be tuned to the same channel you set with the CH3/CH4 switch to see tape playback and status displays from the VCR. To determine which video channel provides the best picture for your system, try the switch in CH3 position and tune your TV to channel 3; then try the CH4 position and tune your TV to channel 4.

For a test display, press the TV/VCR button on remote repeatedly until the VCR indicator light appears in the VCR’s front panel display. Press MENU on the remote to see the main menu.

Select SpeakEZ Function (On/Off)

A voice tells you how to use the features in the menus if SpeakEZ is ON. (ON is recommended.). See the AUDIO Menu for details.

SpeakEZ only functions with

ENGLISH(VRB421/VRB411/VRB211).

SpeakEZ functions with ENGLISH and

SPANISH(VRB412).

Select Language for VCR Menus/Displays

(Optional) Select English, Spanish, or French for VCR menus and status displays. See the LANGUAGE SELECT option on the SETUP menu for details.

Tune

CH3 CH4 TV to

Ch.3

Press 4.

SpeakEZ

CLOCK : 1

TIMER : 2

SETUP : 3

AUDIO : 4

Press number keys

QUIT = exit

MAIN MENU

Press 5.

SETUP MENU

 

AUTO PROGRAM:

 

1

CH. ADD/DEL:

2

SOURCE:

3

ON-SCREEN DISPLAY:

4

LANGUAGE SELECT:

5

Press number keys

QUIT = exit

SETUP MENU

 

Tune

CH3 CH4

TV to

OR

Ch.4

AUDIO MENU

SpeakEZ: ON 1 ON 2 OFF

PLAYBACK: HI-FI

RECORD: STEREO

Press number keys

then ENTER QUIT = exit

Press NUMBER (1 or 2) to choose ON or OFF

SETUP MENU

LANGUAGE SELECT : ENGLISH

1 ENGLISH 2 ESPAÑOL

3 FRANÇAIS

Press number keys

then ENTER QUIT = exit

Press NUMBER (1, 2, or 3) to select the desired language

VRB421 1UZ1

I N S TA L L AT I O N

 

P A G E 1 1

 

Before you operate your VCR

Some things you must do and others you may want to do before you can operate your VCR.

5

Set Date and Time for Clock

 

Press 2.

 

 

Set the clock in the VCR to the current date and

 

 

 

 

 

time. See CLOCK Menu on page 16 for details.

 

 

 

 

 

CLOCK MENU

 

 

 

 

 

 

 

 

Your VCR also has an Auto-Clock Set feature. See

 

 

 

 

 

AUTO CLOCK SET(ON):

1

 

 

CLOCK Menu for details.

 

 

MANUAL CLOCK SET :

2

 

 

 

 

 

The Timer feature will not function unless

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the Clock has been set.

Press number keys

 

 

 

 

 

 

QUIT = exit

6

Select Source for VCR

(Optional) Set the source of the VCR for the

 

 

type of program signal you have connected to

 

the ANT IN jack on the back of the VCR. Choose

 

TV if you have an antenna connected to the VCR.

 

Choose CATV if you have a cable system (with or

 

without a cable box) connected to the VCR.

 

Choose AUX if you have an accessory

 

Audio/Video (A/V) connected to the VCR. See

 

SOURCE option on SETUP menu (page 18) for

 

details.

CLOCK MENU

Press 3.

SETUP MENU

 

AUTO PROGRAM:

 

1

CH. ADD/DEL:

2

SOURCE:

3

ON-SCREEN DISPLAY:

4

LANGUAGE SELECT:

5

Press number keys

QUIT = exit

SETUP MENU

 

CLOCK MENU

MONTH

:

 

JANUARY

1

DAY

:

1

FRI

YEAR

: 1999

TIME

: 12:00 AM

Press number keys

then ENTER

 

QUIT = exit

Press NUMBER (0-9) then ENTER to set date and time

SETUP MENU

SOURCE: TUNER (TV)

 

1

TV

2

CATV

 

3

AUX

Press number keys

then ENTER

 

QUIT = exit

Press NUMBER (1, 2, or 3) to select the desired source

7

Use Auto Program to Find Channels

(Required) Use AUTO PROGRAM to find active

 

 

channels in your broadcast area. AUTO PROGRAM

 

stores the active channels that you can access

 

by using the CH (▼/▲). See AUTO PROGRAM on

 

the SETUP Menu (page 18) for details.

 

Press 1.

 

 

SETUP MENU

 

 

 

 

AUTO PROGRAM: SEARCHING

SETUP MENU

 

 

 

 

AUTO PROGRAM:

 

 

 

1

 

 

CH. ADD/DEL:

2

 

 

SOURCE:

3

 

 

ON-SCREEN DISPLAY:

4

 

QUIT = exit

LANGUAGE SELECT:

5

 

 

Press number keys

 

 

 

QUIT = exit

SETUP MENU

8

Use CH. ADD/DEL to Create Favorite

Channels

 

(Optional) Use CH. ADD/DEL to change the list of active channels found when using AUTO PROGRAM, so you can list your favorites. See CH. ADD/DEL on the SETUP Menu (page 18) for details.

 

Press 2.

 

 

SETUP MENU

 

 

 

 

CH. ADD/DEL: CH.

 

ADD

 

 

 

 

 

SETUP MENU

 

2

 

 

 

 

 

 

AUTO PROGRAM:

 

 

 

 

 

 

1

 

 

 

 

 

CH. ADD/DEL:

2

 

 

 

 

 

SOURCE:

3

 

Press number keys

ON-SCREEN DISPLAY:

4

 

then ENTER

QUIT = exit

LANGUAGE SELECT:

5

 

 

 

 

 

Press number keys

Press NUMBER (0-9)

QUIT = exit

then ENTER

SETUP MENU

 

Loading...
+ 25 hidden pages