Zebra ET50 User Manual

0 (0)

ET5X

Enterprise Tablet

Integrator Guide

MN-002776-01

ET5X INTEGRATOR GUIDE

MN-002776-01

Rev. A

May 2016

iiET5X Integrator Guide

© 2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All rights reserved.

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.

iii

Revision History

Changes to the original guide are listed below:

Change

Date

Description

 

 

 

Rev A

5/2016

Initial release.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

iv ET5X Integrator Guide

TABLE OF CONTENTS

Revision History....................................................................................................................................

iii

About This Guide

 

Introduction ...........................................................................................................................................

ix

Documentation Set .........................................................................................................................

ix

Configurations.......................................................................................................................................

ix

Chapter Descriptions ............................................................................................................................

x

Notational Conventions.........................................................................................................................

x

Related Documents and Software ........................................................................................................

xi

Service Information...............................................................................................................................

xi

Chapter 1: Getting Started

 

Introduction ..........................................................................................................................................

1-1

Unpacking ............................................................................................................................................

1-1

Getting Started .....................................................................................................................................

1-1

Installing a micro SIM Card (ET55 Only) .......................................................................................

1-1

Resetting the ET5X ..............................................................................................................................

1-9

Chapter 2: Accessories

 

Introduction ..........................................................................................................................................

2-1

Charge Only Cradle .............................................................................................................................

2-4

Installing the Insert .........................................................................................................................

2-5

Communication and Charging Cradle ..................................................................................................

2-6

Installing the Insert .........................................................................................................................

2-7

Rugged Communication and Charging Cradle ....................................................................................

2-8

Rugged Frame .....................................................................................................................................

2-10

Expansion Back ...................................................................................................................................

2-13

Installation ......................................................................................................................................

2-13

Programming the SE4710/SE4750 Expansion Backs ...................................................................

2-15

HID Keyboard Emulation Bar Code ...............................................................................................

2-15

Replacement Hand Strap ...............................................................................................................

2-15

vi ET5X Integrator Guide

Chapter 3: Software

 

Introduction ..........................................................................................................................................

3-1

Factory Reset ......................................................................................................................................

3-1

System Updates ..................................................................................................................................

3-1

Creating Installation USB Thumb Drive .........................................................................................

3-2

Setup Using Communication Dock ................................................................................................

3-3

Setup Using a USB Hub ................................................................................................................

3-4

Updating the Operating System .....................................................................................................

3-4

Checking Versions ...............................................................................................................................

3-5

Check ULPMC Version ..................................................................................................................

3-5

Check BIOS Version ......................................................................................................................

3-6

Check Operating System Version ..................................................................................................

3-7

Downgrade to Previous Operating System Version ............................................................................

3-7

Downgrading ULPMC via EFI Shell ...............................................................................................

3-7

Downgrade Operating System .......................................................................................................

3-8

Determining Modem Type ..............................................................................................................

3-9

Data Capture Application Development ...............................................................................................

3-9

Application Installation .........................................................................................................................

3-9

Install from the Internet ..................................................................................................................

3-9

Install from a network .....................................................................................................................

3-9

Chapter 4: Maintenance and Troubleshooting

 

Introduction ..........................................................................................................................................

4-1

Maintaining the ET5X ..........................................................................................................................

4-1

Battery Safety Guidelines ....................................................................................................................

4-1

Cleaning ...............................................................................................................................................

4-2

Materials Required .........................................................................................................................

4-2

Cleaning the ET5X .........................................................................................................................

4-2

Housing ....................................................................................................................................

4-2

Display .....................................................................................................................................

4-3

Power Connector .....................................................................................................................

4-3

Cleaning Cradle Connectors ..........................................................................................................

4-3

Cleaning Expansion Back Connectors ...........................................................................................

4-3

Cleaning Frequency .......................................................................................................................

4-4

Troubleshooting ...................................................................................................................................

4-5

ET5X ..............................................................................................................................................

4-5

Charge Only Cradle .......................................................................................................................

4-6

Communication and Charging Cradles ..........................................................................................

4-6

Expansion Backs ...........................................................................................................................

4-7

Appendix A: Specifications

 

Technical Specifications ......................................................................................................................

A-1

ET5X ..............................................................................................................................................

A-1

SE4710 Expansion Back Decode Range ............................................................................................

A-4

SE4750 Expansion Back Decode Range ............................................................................................

A-5

SE4750 SR Decode Ranges .........................................................................................................

A-5

SE4750 MR Decode Ranges .........................................................................................................

A-6

Accessory Specifications .....................................................................................................................

A-7

Table of Contents

vii

 

 

Charge Only Cradle .......................................................................................................................

A-7

Communication and Charging Cradle ............................................................................................

A-7

Rugged Communication and Charging Cradle ..............................................................................

A-8

Expansion Backs ...........................................................................................................................

A-8

viii ET5X Integrator Guide

ABOUT THIS GUIDE

Introduction

This guide provides information about configuring and setting up the ET5X and accessories.

NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.

Documentation Set

The documentation set for the ET5X is divided into guides that provide information for specific user needs.

ET5X Quick Reference Guide - describes how to get the ET5X tablet up and running.

ET5X User Guide - describes how to use the ET5X tablet.

ET5X Integrator Guide - describes how to setup, the ET5X and accessories.

Configurations

This guide covers the following configurations:

Configuration

Operating

Radios

Display

Memory

Data Capture

System

 

 

 

 

 

ET50NE

Windows® 8.1 Pro

WLAN: 802.11a/b/g/n

8” color

4 GB RAM/

Optional RS507,

 

 

WPAN: Bluetooth

 

64 GB Flash

CS4070, SE4710 or

 

 

 

 

 

SE4750 Expansion

 

 

 

 

 

Backs

 

 

 

 

 

 

ET55AE

Windows® 8.1 Pro

WLAN: 802.11a/b/g/n

8” color

4 GB RAM/

Optional RS507,

 

 

WPAN: Bluetooth

 

64 GB Flash

CS4070, SE4710 or

 

 

WWAN: NA - LTE

 

 

SE4750 Expansion

 

 

 

 

 

Backs

 

 

 

 

 

 

ET55RE

Windows® 8.1 Pro

WLAN: 802.11a/b/g/n

8” color

4 GB RAM/

Optional RS507,

 

 

WPAN: Bluetooth

 

64 GB Flash

CS4070, SE4710 or

 

 

WWAN: ROW - LTE

 

 

SE4750 Expansion

 

 

 

 

 

Backs

 

 

 

 

 

 

x ET5X Integrator Guide

Configuration

Operating

Radios

Display

Memory

Data Capture

System

 

 

 

 

 

ET50NT

Windows® 8.1 Pro

WLAN: 802.11a/b/g/n

10” color

4 GB RAM/

Optional RS507,

 

 

WPAN: Bluetooth

 

64 GB Flash

CS4070, SE4710 or

 

 

 

 

 

SE4750 Expansion

 

 

 

 

 

Backs

 

 

 

 

 

 

ET55AT

Windows® 8.1 Pro

WLAN: 802.11a/b/g/n

10” color

4 GB RAM/

Optional RS507,

 

 

WPAN: Bluetooth

 

64 GB Flash

CS4070, SE4710 or

 

 

WWAN: NA - LTE

 

 

SE4750 Expansion

 

 

 

 

 

Backs

 

 

 

 

 

 

ET55RT

Windows® 8.1 Pro

WLAN: 802.11a/b/g/n

10” color

4 GB RAM/

Optional RS507,

 

 

WPAN: Bluetooth

 

64 GB Flash

CS4070, SE4710 or

 

 

WWAN: ROW - LTE

 

 

SE4750 Expansion

 

 

 

 

 

Backs

 

 

 

 

 

 

Chapter Descriptions

Topics covered in this guide are as follows:

Chapter 1, Getting Started, provides information on getting the tablet up and running for the first time.

Chapter 2, Accessories, describes the accessories available for the tablet and how to use the accessories with the tablet.

Chapter 3, Software, explains how to use the tablet. This includes instructions for powering on and resetting the tablet, entering and capturing data.

Chapter 4, Maintenance and Troubleshooting, includes instructions on cleaning and storing the tablet, and provides troubleshooting solutions for potential problems during tablet operation.

Appendix A, Specifications, includes a table listing the technical specifications for the tablet.

Notational Conventions

The following conventions are used in this document:

“tablet” refers to the Zebra ET5X tablet.

Italics are used to highlight the following:

Chapters and sections in this guide

Related documents

Bold text is used to highlight the following:

Dialog box, window and screen names

Drop-down list and list box names

Check box and radio button names

Icons on a screen

Key names on a keypad

Button names on a screen.

About This Guide

xi

 

 

Bullets (•) indicate:

Action items

Lists of alternatives

Lists of required steps that are not necessarily sequential.

Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

Related Documents and Software

The following documents provide more information about the ET5X tablets.

ET5X Quick Reference Guide, p/n MN001844Axx

ET5X User Guide, p/n MN001843Axx

For the latest version of this guide and all guides, go to: http://www.zebra.com/support.

Service Information

If you have a problem with your equipment, contact Zebra Global Customer Support for your region. Contact information is available at: http://www.zebra.com/support.

When contacting support, please have the following information available:

Serial number of the unit

Model number or product name

Software type and version number.

Zebra responds to calls by email, telephone or fax within the time limits set forth in support agreements.

If your problem cannot be solved by Zebra Customer Support, you may need to return your equipment for servicing and will be given specific directions. Zebra is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty.

If you purchased your Zebra business product from a Zebra business partner, contact that business partner for support.

xii ET5X Integrator Guide

CHAPTER 1 GETTING STARTED

Introduction

This chapter explains how to set the device up for the first time.

Unpacking

Carefully remove all protective material from around the ET5X and save the shipping container for later storage and shipping.

Verify that you received all equipment listed below:

Table with lithium-ion battery

Quick Reference Guide.

Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment, contact the Zebra Support Center immediately. See page xi for contact information.

Getting Started

In order to start using the ET5X for the first time:

install the micro SIM Card (ET55 only)

install microSD card (optional)

start the ET5X

configure the ET5X.

Installing a micro SIM Card (ET55 Only)

CAUTION Do not use nano to micro SIM card adapters.

Zebra ET50 User Manual

1 - 2 ET5X Integrator Guide

To install a micro SIM card:

1.Press the Power button to turn off the ET55.

2.Lift the notched corner of the battery cover.

Figure 1-1 Removing the Battery Cover

3.Carefully lift the battery cover off the ET55.

4.On the 8” version, push the two locking tabs up, then pull up on the tab to remove battery.

On the 10” version, push the two locking tabs up (1), then, using index fingers, lift the battery up (2).

Pull Tab

Locking Tabs

8” Version

Figure 1-2 Removing the Battery - 8”

Getting Started 1 - 3

Locking Tabs

2.

 

LIFT

UP

 

1.

 

REL

 

EA

 

S

 

E

 

LO

 

C

 

KING

1.RELEA SELOCKING

2.LIFTU P

10” Version

Figure 1-3 Removing the Battery - 10”

5.Insert the micro SIM card with contacts facing down.

8” Version

10” Version

Figure 1-4 Insert SIM Card

6.Push the SIM card in and ensure that it locks into place.

7.Replace the battery.

On the 10” version, ensure that the two battery latches engage.

1 - 4 ET5X Integrator Guide

Figure 1-5 Insert Battery

CAUTION Be aware of the orientation of the battery cover. Failure to replace the battery cover properly may damage the battery cover.

8.Align the tabs on the underside of the cover with the slot around the battery well. Make sure that the notch on the battery cover is at the bottom left cover of the ET5X.

Figure 1-6 Align Battery Cover

9.Carefully press down around the edge of the cover. Make sure that the cover is seated properly.

Getting Started 1 - 5

Figure 1-7 Press Down on Battery Cover

10. Press Power button to turn on the ET55.

Use the Communication and Charging Cradle, Rugged Communication and Charging Cradle or Charge Only Cradle to charge the ET5X.

NOTE The Charge Only Cradle (CRD-ET5X-1SCG1) and the Communication and Charge Cradle (CRD-ET5X-1SCOM1) come with two inserts; tall insert and short insert. Install the tall insert when using an ET5X without a Rugged Frame or Expansion Pack. Install the small insert when using an ET5X with an Expansion Pack and without a Rugged Frame. Do not install either insert when using the ET5X with the Rugged Frame.

The Rugged Communication and Charge Cradle (CRD-ET5X-1SCOM1R) does not come with inserts. Use with ET5X and Rugged Frame with IO Adapter.

Short Insert

 

Tall Insert

Charge Only Cradle

Communication Cradle

Rugged Communication Cradle

Figure 1-8 ET5X Cradles

1.If using the Communication and Charging Cradle, open the bottom access door and hold it to the back of the tablet.

2.Align the ET5X with the alignment pins on the cradle.

3.Insert the ET5X into the cradle. Note that the Communication and Charging Cradles contains a locking mechanism that locks the ET5X to the cradle.

1 - 6 ET5X Integrator Guide

Figure 1-9 Insert ET5X into Charge Only Cradle

Figure 1-10 Insert ET5X with Rugged Frame into Communication and Charging Cradle

Getting Started 1 - 7

Figure 1-11 Insert ET5X with Rugged Frame and IO Adapter into Rugged Communication and Charging Cradle

4.The ET5X Charging LED indicates charging.

5.To remove the ET5X from the Charge Only Cradle, hold the cradle down with one hand and lift the ET5X.

1 - 8 ET5X Integrator Guide

Figure 1-12 Remove ET5X from Charge Only Cradle

To remove the ET5X from the Communication and Charging Cradle, press the release button on the right side of the cradle and lift the ET5X. Use thumb to hold down the cradle.

Figure 1-13 Remove ET5X from Communication and Charging Cradles

Getting Started 1 - 9

The main battery usually fully charges in less than three hours. If an Expansion Back is attached, the main battery fully changes in less than 4.5 hours.

Table 1-1 Charging Indicator

LED

Indication

 

 

Off

ET5X is not in the cradle. ET5X is not seated properly. Cradle is not powered.

 

 

Orange

ET5X is charging.

 

 

Green

Charging complete.

 

Note: When the battery is initially inserted in the ET5X, the amber LED flashes once if the

 

battery power is low or the battery is not fully inserted.

 

 

Red

Error in charging; check placement of the ET5X.

 

 

Resetting the ET5X

CAUTION Resetting the ET5X erases all data from the ET5X, including your account configuration, applications, music, pictures and files. Make sure that you back up all the required data before you proceed.

Resetting the ET5X returns Windows to original factory settings.

To reset the ET5X:

1.Swipe-in from the right edge of the display.

2.Touch Settings > Change PC settings > Update and recovery > Recovery.

3.Under Remove everything and reinstall Windows, touch Get started.

4.Read the warning and touch Next.

1 - 10 ET5X Integrator Guide

Loading...
+ 56 hidden pages