Zebra DS4308, DS4308P Manual

DS4308/DS4308P DIGITAL SCANNER

PRODUCT REFERENCE GUIDE

DS4308/DS4308P DIGITAL SCANNER PRODUCT REFERENCE GUIDE

MN000327A06

Revision A

August 2017

ii DS4308/DS4308P Digital Scanner Product Reference Guide

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.

Zebra reserves the right to make changes to any product to improve reliability, function, or design.

Zebra does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Zebra products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Zebra products.

This product may include Seller Software, Third Party Software, and/or Publicly Available Software.

Use of any Software is subject to the applicable licenses, terms and conditions of the agreement in force between you and the Seller unless a separate License is included, in which case, use of the Software will be governed by the separate License.

Copies of the licenses for the following Publicly Available Software, and all attributions, acknowledgements, and software information details, are included below. Seller is required to reproduce the software licenses, acknowledgments and copyright notices as provided by the Authors and Owners. The information is provided in its native language form, without modification or translation.

Publicly available software list:

Name: Regular Expression Evaluator Version: 8.3

Description: Compiles and executes regular expressions

Software Site: http://www.freebsd.org/cgi/cvsweb.cgi/src/lib/libc/regex/

Source Code: No Source Distribution Obligations. Seller will not provide nor distribute the Source Code for the Regular Expression Evaluator.

License: BSD Style License

©1992 Henry Spencer.

©1992, 1993 The Regents of the University of California. All rights reserved.

This code is derived from software contributed to Berkeley by Henry Spencer of the University of Toronto. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1.Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

iii

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Warranty

For the complete hardware product warranty statement, go to: http://www.zebra.com/warranty.

iv DS4308/DS4308P Digital Scanner Product Reference Guide

Revision History

Changes to the original guide are listed below:

Change	Date	Description
-01 Rev A	8/2014	Initial release
-02 Rev A	2/2015	Rebranded, updated Environmental Sealing specification, updated Hands-Free
		Mode description, added Dump Scanner Parameters feature, added
		Communication Protocol Functionality appendix
-03 Rev A	3/2016	Updated Configurations list
		Added DS4308-XD LED indications for hands-free scanning
		Added DS4308-XD decode ranges
		Updated Low Power Mode description
		Added Presentation Performance Mode parameter
		Added note regarding default to Hands-Free Decode Aiming Pattern parameter
		Added Enabled Always option for Picklist Mode parameter
		Added note regarding support to Picklist Mode parameter
		Updated range for PDF Prioritization parameter
		Added note regarding default to Illumination Brightness parameter
		Removed Note from Low Light Scene Detection parameter
		Updated Motion Tolerance default
		Updated Movement Sensitivity description, options, and default
		Added Direct I/O Beep parameter
		Added Note to Data Matrix Inverse parameter
		Added GS1 Data Matrix and GS1 QR to RS-232 Terminal Specific Code ID
		Characters table
		Added GS1 Data Matrix, GS1 QR, and Mailmark parameters
		Removed QR Inverse parameter
		Added OCR Bright Illumination parameter
-04 Rev A	5/2016	Added 2D (Data Matrix) programming bar code for Add Enter Key, User
		Programmable Supplementals, Code 128 Lengths, and Codabar Lengths,
		along with Notes, to accommodate the DS4308-XD
-05 Rev A	9/2016	Added Symbol Code and Aim Code characters: GS1 Data Matrix, GS1-QR,
		and Mailmark.
-06 Rev A	8/2017	Changed hosts USB Keyboard HID to USB HID Keyboard, and IBM OPOS
		(IBM Hand-Held USB with Full Scan Disable) to OPOS (IBM Hand-held with Full
		Disable)
		Changed MSI Check Digit Algorithm option Mod 10/Mod 11 to Mod 11/Mod 10
		Renamed GS1 DataBar-14 to GS1 DataBar Omnidirectional
		Removed ADF chapter and updated 123Scan chapter

TABLE OF CONTENTS

About This Guide
Introduction .....................................................................................................................................	xvii
Configurations.................................................................................................................................	xvii
Chapter Descriptions ......................................................................................................................	xviii
Notational Conventions...................................................................................................................	xix
Related Documents ........................................................................................................................	xx
Service Information .........................................................................................................................	xx
Chapter 1: Getting Started
Introduction ....................................................................................................................................	1-1
Interfaces .......................................................................................................................................	1-2
Unpacking ......................................................................................................................................	1-2
Setting Up the Digital Scanner .......................................................................................................	1-3
Installing the Interface Cable ...................................................................................................	1-3
Removing the Interface Cable .................................................................................................	1-4
Connecting Power (if required) ................................................................................................	1-4
Configuring the Digital Scanner ...............................................................................................	1-4
Accessories ....................................................................................................................................	1-5
Chapter 2: Data Capture
Introduction ....................................................................................................................................	2-1
Beeper Definitions ..........................................................................................................................	2-2
LED Definitions ..............................................................................................................................	2-4
Scanning ........................................................................................................................................	2-6
Scanning in Hands-Free (Presentation) Mode - DS4308 ........................................................	2-6
Scanning in Hands-Free (Presentation) Mode - DS4308P ......................................................	2-9
Scanning in Hand-Held Mode ..................................................................................................	2-11
Aiming ......................................................................................................................................	2-11
Decode Ranges .............................................................................................................................	2-13

vi DS4308/DS4308P Digital Scanner Product Reference Guide

Chapter 3: Maintenance & Technical Specifications
Introduction ....................................................................................................................................	3-1
Maintenance ..................................................................................................................................	3-1
General Scanner Maintenance ................................................................................................	3-1
Healthcare Scanner Maintenance ............................................................................................	3-1
Troubleshooting .............................................................................................................................	3-3
Report Software Version Bar Code ..........................................................................................	3-6
Technical Specifications ................................................................................................................	3-7
Digital Scanner Signal Descriptions ...............................................................................................	3-9
Chapter 4: User Preferences & Miscellaneous Options
Introduction ....................................................................................................................................	4-1
Scanning Sequence Examples ......................................................................................................	4-2
Errors While Scanning ...................................................................................................................	4-2
User Preferences/Miscellaneous Options Parameter Defaults ......................................................	4-2
User Preferences ...........................................................................................................................	4-5
Default Parameters ..................................................................................................................	4-5
Parameter Bar Code Scanning ................................................................................................	4-6
Beep on Decode ......................................................................................................................	4-7
Direct Decode Indicator ...........................................................................................................	4-8
Beeper Volume ........................................................................................................................	4-9
Beeper Tone ............................................................................................................................	4-10
Beeper Duration .......................................................................................................................	4-11
Suppress Power Up Beeps ......................................................................................................	4-11
Decode Pager Motor (DS4308-HC and DS4308-XD) ..............................................................	4-12
Decode Pager Motor Duration .................................................................................................	4-12
Night Mode (DS4308-HC Only) ...............................................................................................	4-14
Low Power Mode .....................................................................................................................	4-16
Time Delay to Low Power Mode ..............................................................................................	4-17
Hand-Held Trigger Mode .........................................................................................................	4-19
Hands-Free Mode ....................................................................................................................	4-20
Presentation Performance Mode .............................................................................................	4-21
Hands-Free/Hand-Held Auto Switching (DS4308P Only) ........................................................	4-22
Hand-Held Decode Aiming Pattern ..........................................................................................	4-23
Hands-Free Decode Aiming Pattern ........................................................................................	4-24
Hands-Free Motionless Timeout (DS4308P Only) ...................................................................	4-24
Motion Detect Range (DS4308P Only) ....................................................................................	4-25
Picklist Mode ............................................................................................................................	4-26
Continuous Bar Code Read .....................................................................................................	4-27
Unique Bar Code Reporting .....................................................................................................	4-27
Decode Session Timeout .........................................................................................................	4-28
Timeout Between Decodes, Same Symbol .............................................................................	4-28
Timeout Between Decodes, Different Symbols .......................................................................	4-29
Fuzzy 1D Processing ...............................................................................................................	4-29
Decode Mirror Images (Data Matrix Only) ...............................................................................	4-30
Mobile Phone/Display Mode ....................................................................................................	4-31
PDF Prioritization .....................................................................................................................	4-32
PDF Prioritization Timeout .......................................................................................................	4-32
Presentation Mode Field of View .............................................................................................	4-33
Decoding Illumination ...............................................................................................................	4-33

	Table of Contents vii
Post Decode Illumination (DS4308P Only) ..............................................................................	4-34
Illumination Brightness .......................................................................................................	...... 4-35
Low Light Scene Detection .....................................................................................................	. 4-36
Motion Tolerance (Hand-Held Trigger Modes Only) ................................................................	4-37
Movement Sensitivity (DS4308P Only) ....................................................................................	4-38
Object Detection Method (DS4308P Only) ..............................................................................	4-39
Miscellaneous Scanner Parameters ..............................................................................................	4-40
Add an Enter Key ..............................................................................................................	....... 4-40
Transmit Code ID Character ....................................................................................................	4-41
Prefix/Suffix Values ..........................................................................................................	........ 4-42
Scan Data Transmission Format .............................................................................................	4-43
FN1 Substitution Values .......................................................................................................	... 4-44
Transmit “No Read” Message ..................................................................................................	4-45
Unsolicited Heartbeat Interval ................................................................................................	.. 4-46
Dump Scanner Parameters .....................................................................................................	4-47
Chapter 5: Imaging Preferences
Introduction ..................................................................................................................	.................. 5-1
Scanning Sequence Examples ....................................................................................................	.. 5-2
Errors While Scanning .........................................................................................................	.......... 5-2
Imaging Preferences Parameter Defaults ......................................................................................	5-2
Imaging Preferences ...........................................................................................................	........... 5-4
Operational Modes .............................................................................................................	...... 5-4
Image Capture Illumination ....................................................................................................	.. 5-5
Image Capture Autoexposure ..................................................................................................	5-5
Fixed Exposure ................................................................................................................	........ 5-6
Fixed Gain ....................................................................................................................	............ 5-6
Gain/Exposure Priority for Snapshot Mode ..............................................................................	5-7
Snapshot Mode Timeout .........................................................................................................	. 5-8
Snapshot Aiming Pattern .......................................................................................................	.. 5-9
Silence Operational Mode Changes ........................................................................................	5-9
Image Cropping ................................................................................................................	....... 5-10
Crop to Pixel Addresses .......................................................................................................	... 5-11
Image Size (Number of Pixels) ................................................................................................	5-12
Image Brightness (Target White) .............................................................................................	5-13
JPEG Image Options ............................................................................................................	... 5-13
JPEG Target File Size .........................................................................................................	.... 5-14
JPEG Quality and Size Value ..................................................................................................	5-14
Image Enhancement .............................................................................................................	... 5-15
Image File Format Selector ....................................................................................................	.. 5-16
Image Rotation ................................................................................................................	......... 5-17
Bits Per Pixel ................................................................................................................	............ 5-18
Signature Capture .............................................................................................................	....... 5-19
Signature Capture File Format Selector ..................................................................................	5-20
Signature Capture Bits Per Pixel .............................................................................................	5-21
Signature Capture Width .......................................................................................................	... 5-22
Signature Capture Height ......................................................................................................	.. 5-22
Signature Capture JPEG Quality .............................................................................................	5-22
Video Mode Format Selector ...................................................................................................	5-23
Video View Finder .............................................................................................................	....... 5-23

viii DS4308/DS4308P Digital Scanner Product Reference Guide

Target Video Frame Size .........................................................................................................	5-24
Video View Finder Image Size .................................................................................................	5-24
Chapter 6: USB Interface
Introduction ....................................................................................................................................	6-1
Connecting a USB Interface ..........................................................................................................	6-2
USB Parameter Defaults ...............................................................................................................	6-4
USB Host Parameters ...................................................................................................................	6-5
USB Device Type .....................................................................................................................	6-5
Symbol Native API (SNAPI) Status Handshaking ....................................................................	6-7
USB Keystroke Delay ..............................................................................................................	6-7
USB CAPS Lock Override .......................................................................................................	6-8
USB Ignore Unknown Characters ............................................................................................	6-8
USB Convert Unknown to Code 39 .........................................................................................	6-9
Emulate Keypad .......................................................................................................................	6-9
Emulate Keypad with Leading Zero .........................................................................................	6-10
Quick Keypad Emulation ..........................................................................................................	6-10
USB Keyboard FN 1 Substitution .............................................................................................	6-11
Function Key Mapping .............................................................................................................	6-11
Simulated Caps Lock ...............................................................................................................	6-12
Convert Case ...........................................................................................................................	6-12
USB Static CDC .......................................................................................................................	6-13
Direct I/O Beep ........................................................................................................................	6-13
TGCS (IBM) USB Beep Directive ............................................................................................	6-14
TGCS (IBM) USB Bar Code Configuration Directive ...............................................................	6-14
USB Polling Interval .................................................................................................................	6-15
USB Fast HID ..........................................................................................................................	6-16
TGCS (IBM) USB Specification Version ..................................................................................	6-17
ASCII Character Set for USB .........................................................................................................	6-18
Chapter 7: SSI Interface
Introduction ....................................................................................................................................	7-1
Communications ............................................................................................................................	7-1
SSI Transactions ...........................................................................................................................	7-3
General Data Transactions ......................................................................................................	7-3
Transfer of Decode Data ..........................................................................................................	7-4
Communication Summary .............................................................................................................	7-5
RTS/CTS Lines ........................................................................................................................	7-5
ACK/NAK Option ......................................................................................................................	7-5
Number of Data Bits .................................................................................................................	7-5
Serial Response Time-out .......................................................................................................	7-5
Retries ......................................................................................................................................	7-5
Baud Rate, Stop Bits, Parity, Response Time-out, ACK/NAK Handshake ..............................	7-6
Errors .......................................................................................................................................	7-6
Things to Remember When Using SSI Communication ................................................................	7-6
Using Time Delay to Low Power Mode with SSI ...........................................................................	7-7
Encapsulation of RSM Commands/Responses over SSI ..............................................................	7-8
Command Structure .................................................................................................................	7-8
Response Structure .................................................................................................................	7-8

	Table of Contents	ix
Example Transaction ...........................................................................................................	.... 7-9
Simple Serial Interface Default Parameters ...................................................................................	7-10
SSI Host Parameters ...........................................................................................................	.......... 7-11
Select SSI Host ...............................................................................................................	......... 7-11
Baud Rate .....................................................................................................................	........... 7-12
Parity ........................................................................................................................	................ 7-13
Check Parity ..................................................................................................................	........... 7-14
Stop Bits .....................................................................................................................	.............. 7-14
Software Handshaking ..........................................................................................................	... 7-15
Host RTS Line State ...........................................................................................................	..... 7-16
Decode Data Packet Format ....................................................................................................	7-16
Host Serial Response Time-out ...............................................................................................	7-17
Host Character Time-out .......................................................................................................	... 7-18
Multipacket Option ............................................................................................................	....... 7-19
Interpacket Delay .............................................................................................................	........ 7-20
Event Reporting ...............................................................................................................	.............. 7-21
Decode Event ..................................................................................................................	........ 7-21
Boot Up Event .................................................................................................................	......... 7-22
Parameter Event ...............................................................................................................	....... 7-22
Chapter 8: RS-232 Interface
Introduction ..................................................................................................................	.................. 8-1
Connecting an RS-232 Interface ................................................................................................	.... 8-2
RS-232 Parameter Defaults .....................................................................................................	...... 8-3
RS-232 Host Parameters ........................................................................................................	....... 8-4
RS-232 Host Types .............................................................................................................	..... 8-7
Baud Rate .....................................................................................................................	........... 8-9
Parity ........................................................................................................................	................ 8-10
Stop Bit Select ...............................................................................................................	.......... 8-11
Data Bits .....................................................................................................................	............. 8-11
Check Receive Errors ..........................................................................................................	.... 8-12
Hardware Handshaking ..........................................................................................................	. 8-12
Software Handshaking ..........................................................................................................	... 8-14
Host Serial Response Time-out ...............................................................................................	8-16
RTS Line State ................................................................................................................	......... 8-17
Beep on <BEL> .................................................................................................................	....... 8-17
Intercharacter Delay ..........................................................................................................	....... 8-18
Nixdorf Beep/LED Options ......................................................................................................	. 8-19
Ignore Unknown Characters ....................................................................................................	8-19
ASCII Character Set for RS-232 ................................................................................................	.... 8-20
Chapter 9: IBM 468X / 469X Interface
Introduction ..................................................................................................................	.................. 9-1
Connecting to an IBM 468X/469X Host .........................................................................................	9-2
IBM Parameter Defaults ........................................................................................................	......... 9-3
IBM 468X/469X Host Parameters .................................................................................................	. 9-4
Port Address ..................................................................................................................	.......... 9-4
Convert Unknown to Code 39 ..................................................................................................	9-5
Ignore Beep Directive .........................................................................................................	..... 9-5

x DS4308/DS4308P Digital Scanner Product Reference Guide

Ignore Bar Code Configuration Directive .................................................................................	9-6
Chapter 10: Keyboard Wedge Interface
Introduction ....................................................................................................................................	10-1
Connecting a Keyboard Wedge Interface ......................................................................................	10-2
Keyboard Wedge Parameter Defaults ...........................................................................................	10-3
Keyboard Wedge Host Parameters ...............................................................................................	10-4
Keyboard Wedge Host Types ..................................................................................................	10-4
Ignore Unknown Characters ....................................................................................................	10-4
Keystroke Delay .......................................................................................................................	10-5
Intra-Keystroke Delay ..............................................................................................................	10-5
Alternate Numeric Keypad Emulation ......................................................................................	10-6
Quick Keypad Emulation ..........................................................................................................	10-6
Simulated Caps Lock ...............................................................................................................	10-7
Caps Lock Override .................................................................................................................	10-7
Convert Wedge Case ...............................................................................................................	10-8
Function Key Mapping .............................................................................................................	10-8
FN1 Substitution ......................................................................................................................	10-9
Send Make and Break .............................................................................................................	10-9
Keyboard Maps ........................................................................................................................	10-10
ASCII Character Set for Keyboard Wedge ....................................................................................	10-11
Chapter 11: Symbologies
Introduction ....................................................................................................................................	11-1
Scanning Sequence Examples ......................................................................................................	11-1
Errors While Scanning ...................................................................................................................	11-2
Symbology Parameter Defaults .....................................................................................................	11-2
Enable/Disable All Code Types .....................................................................................................	11-8
UPC/EAN .......................................................................................................................................	11-9
Enable/Disable UPC-A .............................................................................................................	11-9
Enable/Disable UPC-E .............................................................................................................	11-9
Enable/Disable UPC-E1 ...........................................................................................................	11-10
Enable/Disable EAN-8/JAN-8 ..................................................................................................	11-10
Enable/Disable EAN-13/JAN-13 ..............................................................................................	11-11
Enable/Disable Bookland EAN ................................................................................................	11-11
Decode UPC/EAN/JAN Supplementals ...................................................................................	11-12
User-Programmable Supplementals ........................................................................................	11-15
UPC/EAN/JAN Supplemental Redundancy .............................................................................	11-16
UPC/EAN/JAN Supplemental AIM ID Format ..........................................................................	11-17
UPC Reduced Quiet Zone .......................................................................................................	11-18
Transmit UPC-A Check Digit ...................................................................................................	11-18
Transmit UPC-E Check Digit ...................................................................................................	11-19
Transmit UPC-E1 Check Digit .................................................................................................	11-19
UPC-A Preamble .....................................................................................................................	11-20
UPC-E Preamble .....................................................................................................................	11-21
UPC-E1 Preamble ...................................................................................................................	11-22
Convert UPC-E to UPC-A ........................................................................................................	11-23
Convert UPC-E1 to UPC-A ......................................................................................................	11-23
EAN-8/JAN-8 Extend ...............................................................................................................	11-24

	Table of Contents xi
Bookland ISBN Format ..........................................................................................................	.. 11-24
UCC Coupon Extended Code ..................................................................................................	11-25
Coupon Report .................................................................................................................	........ 11-25
ISSN EAN ......................................................................................................................	.......... 11-26
Code 128 ......................................................................................................................	................. 11-27
Enable/Disable Code 128 .......................................................................................................	. 11-27
Set Lengths for Code 128 ......................................................................................................	.. 11-27
Enable/Disable GS1-128 (formerly UCC/EAN-128) .................................................................	11-29
Enable/Disable ISBT 128 .......................................................................................................	.. 11-29
ISBT Concatenation ............................................................................................................	..... 11-30
Check ISBT Table ..............................................................................................................	...... 11-31
ISBT Concatenation Redundancy ............................................................................................	11-31
Code 128 Security Level .......................................................................................................	... 11-32
Code 128 Reduced Quiet Zone ...............................................................................................	11-33
Ignore Code 128 <FNC4> ........................................................................................................	11-33
Code 39 .......................................................................................................................	.................. 11-34
Enable/Disable Code 39 ........................................................................................................	.. 11-34
Enable/Disable Trioptic Code 39 .............................................................................................	11-34
Convert Code 39 to Code 32 ...................................................................................................	11-35
Code 32 Prefix ................................................................................................................	......... 11-35
Set Lengths for Code 39 .......................................................................................................	... 11-36
Code 39 Check Digit Verification .............................................................................................	11-37
Transmit Code 39 Check Digit .................................................................................................	11-37
Code 39 Full ASCII Conversion ...............................................................................................	11-38
Code 39 Security Level ........................................................................................................	.... 11-39
Code 39 Reduced Quiet Zone .................................................................................................	11-40
Code 93 .......................................................................................................................	.................. 11-41
Enable/Disable Code 93 ........................................................................................................	.. 11-41
Set Lengths for Code 93 .......................................................................................................	... 11-41
Code 11 .......................................................................................................................	.................. 11-43
Code 11 .......................................................................................................................	............ 11-43
Set Lengths for Code 11 .......................................................................................................	... 11-43
Code 11 Check Digit Verification .............................................................................................	11-45
Transmit Code 11 Check Digits ...............................................................................................	11-46
Interleaved 2 of 5 (ITF) ......................................................................................................	............ 11-47
Enable/Disable Interleaved 2 of 5 ............................................................................................	11-47
Set Lengths for Interleaved 2 of 5 ............................................................................................	11-47
I 2 of 5 Check Digit Verification .............................................................................................	... 11-49
Transmit I 2 of 5 Check Digit .................................................................................................	... 11-50
Convert I 2 of 5 to EAN-13 ....................................................................................................	... 11-50
I 2 of 5 Security Level .......................................................................................................	....... 11-51
I 2 of 5 Reduced Quiet Zone ...................................................................................................	. 11-52
Discrete 2 of 5 (DTF) .........................................................................................................	............ 11-53
Enable/Disable Discrete 2 of 5 ................................................................................................	. 11-53
Set Lengths for Discrete 2 of 5 ...............................................................................................	. 11-53
Codabar (NW - 7) ..............................................................................................................	............. 11-55
Enable/Disable Codabar ........................................................................................................	.. 11-55
Set Lengths for Codabar .......................................................................................................	... 11-55
CLSI Editing ..................................................................................................................	........... 11-57
NOTIS Editing .................................................................................................................	......... 11-57
Codabar Upper or Lower Case Start/Stop Characters Detection ............................................	11-58

xii DS4308/DS4308P Digital Scanner Product Reference Guide

MSI ................................................................................................................................................	11-59
Enable/Disable MSI .................................................................................................................	11-59
Set Lengths for MSI .................................................................................................................	11-59
MSI Check Digits .....................................................................................................................	11-61
Transmit MSI Check Digit(s) ....................................................................................................	11-61
MSI Check Digit Algorithm .......................................................................................................	11-62
Chinese 2 of 5 ................................................................................................................................	11-63
Enable/Disable Chinese 2 of 5 .................................................................................................	11-63
Matrix 2 of 5 ...................................................................................................................................	11-64
Enable/Disable Matrix 2 of 5 ....................................................................................................	11-64
Set Lengths for Matrix 2 of 5 ....................................................................................................	11-64
Matrix 2 of 5 Check Digit ..........................................................................................................	11-66
Transmit Matrix 2 of 5 Check Digit ...........................................................................................	11-66
Korean 3 of 5 .................................................................................................................................	11-67
Enable/Disable Korean 3 of 5 ..................................................................................................	11-67
Inverse 1D .....................................................................................................................................	11-68
GS1 DataBar .................................................................................................................................	11-69
GS1 DataBar Omnidirectional (formerly GS1 DataBar-14) ......................................................	11-69
GS1 DataBar Limited ...............................................................................................................	11-69
GS1 DataBar Expanded ..........................................................................................................	11-70
Convert GS1 DataBar to UPC/EAN .........................................................................................	11-70
GS1 DataBar Limited Security Level .......................................................................................	11-71
Composite ......................................................................................................................................	11-72
Composite CC-C ......................................................................................................................	11-72
Composite CC-A/B ...................................................................................................................	11-72
Composite TLC-39 ...................................................................................................................	11-73
UPC Composite Mode .............................................................................................................	11-73
Composite Beep Mode ............................................................................................................	11-74
GS1-128 Emulation Mode for UCC/EAN Composite Codes ....................................................	11-74
2D Symbologies .............................................................................................................................	11-75
Enable/Disable PDF417 ...........................................................................................................	11-75
Enable/Disable MicroPDF417 ..................................................................................................	11-75
Code 128 Emulation ................................................................................................................	11-76
Data Matrix ...............................................................................................................................	11-77
Data Matrix Inverse ..................................................................................................................	11-77
GS1 Data Matrix ......................................................................................................................	11-78
Maxicode ..................................................................................................................................	11-78
QR Code ..................................................................................................................................	11-79
GS1 QR ...................................................................................................................................	11-79
MicroQR ...................................................................................................................................	11-80
Aztec ........................................................................................................................................	11-81
Aztec Inverse ...........................................................................................................................	11-81
Han Xin ....................................................................................................................................	11-82
Han Xin Inverse .......................................................................................................................	11-82
Postal Codes .................................................................................................................................	11-83
US Postnet ...............................................................................................................................	11-83
US Planet .................................................................................................................................	11-83
Transmit US Postal Check Digit ...............................................................................................	11-84
UK Postal .................................................................................................................................	11-84
Transmit UK Postal Check Digit ...............................................................................................	11-85
Japan Postal ............................................................................................................................	11-85

	Table of Contents xiii
Australia Post ................................................................................................................	........... 11-86
Australia Post Format .........................................................................................................	..... 11-87
Netherlands KIX Code .........................................................................................................	... 11-88
USPS 4CB/One Code/Intelligent Mail ......................................................................................	11-88
UPU FICS Postal ...............................................................................................................	...... 11-89
Mailmark ......................................................................................................................	............ 11-89
Symbology-Specific Security Levels ............................................................................................	.. 11-90
Redundancy Level ..............................................................................................................	..... 11-90
Security Level ................................................................................................................	.......... 11-92
1D Quiet Zone Level ...........................................................................................................	..... 11-93
Intercharacter Gap Size .......................................................................................................	.... 11-94
Report Version ................................................................................................................	............... 11-94
Macro PDF Features ............................................................................................................	.......... 11-95
Flush Macro Buffer ............................................................................................................	....... 11-95
Abort Macro PDF Entry .........................................................................................................	... 11-95
Chapter 12: Intelligent Document Capture
Introduction ..................................................................................................................	.................. 12-1
The IDC Process ...............................................................................................................	............. 12-1
Bar Code Acceptance Test ......................................................................................................	12-2
Capture Region Determination ................................................................................................	12-2
Image Post Processing .........................................................................................................	... 12-3
Data Transmission .............................................................................................................	...... 12-3
PC Application and Programming Support ....................................................................................	12-3
Parameters ....................................................................................................................	................ 12-4
IDC Operating Mode ............................................................................................................	.... 12-5
IDC Symbology .................................................................................................................	....... 12-6
IDC X Coordinate ..............................................................................................................	....... 12-7
IDC Y Coordinate ..............................................................................................................	....... 12-7
IDC Width .....................................................................................................................	............ 12-8
IDC Height ....................................................................................................................	........... 12-8
IDC Aspect ....................................................................................................................	........... 12-9
IDC File Format Selector ......................................................................................................	... 12-9
IDC Bits Per Pixel ............................................................................................................	........ 12-10
IDC JPEG Quality ..............................................................................................................	...... 12-10
IDC Find Box Outline ..........................................................................................................	..... 12-11
IDC Minimum Text Length .......................................................................................................	12-11
IDC Maximum Text Length ......................................................................................................	12-12
IDC Captured Image Brighten ..................................................................................................	12-12
IDC Captured Image Sharpen .................................................................................................	12-13
IDC Border Type ...............................................................................................................	....... 12-14
IDC Delay Time ................................................................................................................	........ 12-15
IDC Zoom Limit ................................................................................................................	........ 12-15
IDC Maximum Rotation ..........................................................................................................	.. 12-16
Quick Start ...................................................................................................................	.................. 12-17
Sample IDC Setup ..............................................................................................................	..... 12-17
IDC Demonstrations ............................................................................................................	..... 12-18
Other Suggestions .............................................................................................................	...... 12-19
Quick Start Form ..............................................................................................................	........ 12-19

xiv DS4308/DS4308P Digital Scanner Product Reference Guide

Chapter 13: OCR Programming
Introduction ....................................................................................................................................	13-1
OCR Parameter Defaults ...............................................................................................................	13-2
OCR Programming Parameters .....................................................................................................	13-3
Enable/Disable OCR-A ............................................................................................................	13-3
OCR-A Variant .........................................................................................................................	13-3
Enable/Disable OCR-B ............................................................................................................	13-5
OCR-B Variant .........................................................................................................................	13-6
Enable/Disable MICR E13B .....................................................................................................	13-9
Enable/Disable US Currency Serial Number ...........................................................................	13-10
OCR Orientation ......................................................................................................................	13-10
OCR Lines ...............................................................................................................................	13-12
OCR Minimum Characters .......................................................................................................	13-12
OCR Maximum Characters ......................................................................................................	13-13
OCR Subset .............................................................................................................................	13-13
OCR Quiet Zone ......................................................................................................................	13-14
OCR Bright Illumination ...........................................................................................................	13-14
OCR Template .........................................................................................................................	13-15
OCR Check Digit Modulus .......................................................................................................	13-24
OCR Check Digit Multiplier ......................................................................................................	13-25
OCR Check Digit Validation .....................................................................................................	13-26
Inverse OCR ............................................................................................................................	13-31
Chapter 14: Driver’s License Set Up (DS4308-DL)
Introduction ....................................................................................................................................	14-1
Driver’s License Parsing ................................................................................................................	14-2
Parsing Driver’s License Data Fields (Embedded Driver's License Parsing) ................................	14-3
Embedded Driver's License Parsing Criteria - Code Type ......................................................	14-3
Driver’s License Parse Field Bar Codes ..................................................................................	14-4
AAMVA Parse Field Bar Codes ...............................................................................................	14-7
User Preferences ...........................................................................................................................	14-17
Set Default Parameter .............................................................................................................	14-17
Output Gender as M or F .........................................................................................................	14-17
Date Format .............................................................................................................................	14-18
Send Keystroke (Control Characters and Keyboard Characters) ............................................	14-20
Parsing Rule Example ...................................................................................................................	14-39
Embedded Driver's License Parsing ADF Example .................................................................	14-43
Chapter 15: 123Scan and Software Tools
Introduction ....................................................................................................................................	15-1
123Scan .........................................................................................................................................	15-1
Communication with 123Scan .................................................................................................	15-2
123Scan Requirements ...........................................................................................................	15-2
123Scan Information ................................................................................................................	15-2
Scanner SDK, Other Software Tools, and Videos ...................................................................	15-3
Scanner Control App (SCA) ...........................................................................................................	15-4
Advanced Data Formatting (ADF) .................................................................................................	15-4

	Table of Contents xv
Appendix A: Standard Default Parameters
Appendix B: Country Codes
Introduction ..................................................................................................................	.................. B-1
USB and Keyboard Wedge Country Keyboard Types (Country Codes) ........................................	B-2
Appendix C: Country Code Pages
Introduction ..................................................................................................................	.................. C-1
Country Code Page Defaults ....................................................................................................	..... C-1
Country Code Page Bar Codes ...................................................................................................	.. C-5
Appendix D: CKJ Decode Control
Introduction ..................................................................................................................	.................. D-1
CJK Control Parameters ........................................................................................................	........ D-2
Unicode Output Control ........................................................................................................	... D-2
CJK Output Method to Windows Host .....................................................................................	D-3
Non-CJK UTF Bar Code Output ..............................................................................................	D-5
Unicode/CJK Decode Setup with Windows Host ...........................................................................	D-7
Setting Up the Windows Registry Table for Unicode Universal Output ...................................	D-7
Adding CJK IME on Windows ..................................................................................................	D-7
Selecting the Simplified Chinese Input Method on the Host ....................................................	D-8
Selecting the Traditional Chinese Input Method on the Host ...................................................	D-9
Appendix E: Programming Reference
Symbol Code Identifiers .......................................................................................................	.......... E-1
AIM Code Identifiers ..........................................................................................................	............ E-3
Appendix F: Sample Bar Codes
Code 39 .......................................................................................................................	.................. F-1
UPC/EAN .......................................................................................................................	................ F-1
UPC-A, 100% ...................................................................................................................	........ F-1
EAN-13, 100% ..................................................................................................................	....... F-2
Code 128 ......................................................................................................................	................. F-2
Interleaved 2 of 5 ............................................................................................................	............... F-2
GS1 DataBar Omnidirectional ...................................................................................................	..... F-3
PDF417 ........................................................................................................................	.................. F-3
Data Matrix ...................................................................................................................	.................. F-3
Maxicode ......................................................................................................................	.................. F-3
QR Code .......................................................................................................................	................. F-4
US Postnet ....................................................................................................................	................. F-4
UK Postal .....................................................................................................................	.................. F-4
Appendix G: Numeric Bar Codes
Numeric Bar Codes .............................................................................................................	........... G-1
Cancel ........................................................................................................................	.................... G-2

xvi DS4308/DS4308P Digital Scanner Product Reference Guide

Appendix H: ASCII Character Sets
Appendix I: Communication Protocol Functionality
Functionality Supported via Communication (Cable) Interface ......................................................	I-1
Appendix J: Signature Capture Code
Introduction ....................................................................................................................................	J-1
Code Structure ...............................................................................................................................	J-1
Signature Capture Area ...........................................................................................................	J-1
CapCode Pattern Structure ......................................................................................................	J-2
Start / Stop Patterns ......................................................................................................................	J-2
Dimensions ....................................................................................................................................	J-3
Data Format ...................................................................................................................................	J-3
Additional Capabilities ...................................................................................................................	J-4
Signature Boxes ............................................................................................................................	J-4

Index

ABOUT THIS GUIDE

Introduction

The DS4308/DS4308P Product Reference Guide provides general instructions for setting up, operating, maintaining, and troubleshooting the DS4308 series digital scanner.

Configurations

This guide includes the following DS4308 series digital scanner configurations:

•	DS4308-SR	DS4308 Area Imager, Standard Range
•	DS4308-DL	DS4308 Area Imager, Driver’s License (DL) Parsing
•	DS4308-HD	DS4308 Area Imager, High Density, Checkpoint EAS optional
•	DS4308-HL	DS4308 Area Imager, High Density, DL Parsing, Checkpoint EAS optional
•	DS4308-HC	DS4308 Area Imager, Healthcare
•	DS4308-XD	DS4308 Area Imager, Extreme Density
•	DS4308P-SR	DS4308 Area Imager with Integrated Presentation Stand, Standard Range,
		Checkpoint EAS optional
•	DS4308P-DL	DS4308 Area Imager with Integrated Presentation Stand, DL Parsing,
		Checkpoint EAS optional

xviii DS4308/DS4308P Digital Scanner Product Reference Guide

Chapter Descriptions

Topics covered in this guide are as follows:

•Chapter 1, Getting Started provides a product overview, unpacking instructions, and cable connection information.

•Chapter 2, Data Capture provides beeper and LED definitions, techniques involved in scanning bar codes, general instructions and tips about scanning, and decode ranges.

•Chapter 3, Maintenance & Technical Specifications provides suggested digital scanner maintenance, troubleshooting, technical specifications, and signal descriptions (pinouts).

•Chapter 4, User Preferences & Miscellaneous Options describes each user preference feature and provides programming bar codes for selecting these features.

•Chapter 5, Imaging Preferences describes imaging preference features and provides programming bar codes for selecting these features.

•Chapter 6, USB Interface describes how to set up the digital scanner with a USB host.

•Chapter 7, SSI Interface describes the system requirements of the Simple Serial Interface (SSI), which provides a communications link between Zebra decoders and a serial host.

•Chapter 8, RS-232 Interface describes how to set up the digital scanner with an RS-232 host.

•Chapter 9, IBM 468X / 469X Interface describes how to set up the digital scanner with an IBM 468X/469X host.

•Chapter 10, Keyboard Wedge Interface describes how to set up a keyboard wedge interface with the digital scanner.

•Chapter 11, Symbologies describes all symbology features and provides programming bar codes for selecting these features for the digital scanner.

•Chapter 12, Intelligent Document Capture describes IDC, an advanced image processing firmware, including IDC functionality, parameter bar codes to control its features, and a quick start procedure.

•Chapter 13, OCR Programming describes how to set up the digital scanner for OCR programming.

•Chapter 14, Driver’s License Set Up (DS4308-DL) describes how to program the DS4308-DL digital scanner to read and use the data contained in the 2D bar codes on US driver's licenses and AAMVA compliant ID cards.

•Chapter 15, 123Scan and Software Tools provides information on the PC-based digital scanner configuration tool 123Scan2.

•Appendix A, Standard Default Parameters provides a table of all host devices and miscellaneous scanner defaults.

•Appendix B, Country Codes provides bar codes for programming the country keyboard type for the USB keyboard (HID) device and the keyboard wedge host.

•Appendix C, Country Code Pages provides bar codes for selecting code pages for the country keyboard type.

•Appendix D, CKJ Decode Control describes control parameters for Unicode/CJK (Chinese, Japanese, Korean) bar code decode through USB HID Keyboard Emulation mode.

•Appendix E, Programming Reference provides a table of AIM code identifiers, ASCII character conversions, and keyboard maps.

About This Guide	xix

•Appendix F, Sample Bar Codes includes sample bar codes of various code types.

•Appendix G, Numeric Bar Codes includes the numeric bar codes to scan for parameters requiring specific numeric values.

•Appendix H, ASCII Character Sets provides ASCII character value tables.

•Appendix I, Communication Protocol Functionality lists supported scanner functionality by communication protocol.

•Appendix J, Signature Capture Code describes CapCode, a special pattern that encloses a signature area on a document and allows the scanner to capture a signature.

Notational Conventions

The following conventions are used in this document:

•Unless stated otherwise, DS4308 refers to both the DS4308 and DS4308P configurations

•Italics are used to highlight the following:

•Chapters and sections in this and related documents

•Dialog box, window and screen names

•Drop-down list and list box names

•Check box and radio button names

•Bold text is used to highlight the following:

•Key names on a keypad

•Button names on a screen.

•bullets (•) indicate:

•Action items

•Lists of alternatives

•Lists of required steps that are not necessarily sequential

•Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

•Throughout the programming bar code menus, asterisks (*) are used to denote default parameter settings.

* Indicates Default

*Baud Rate 9600

Feature/Option

xx DS4308/DS4308P Digital Scanner Product Reference Guide

Related Documents

•DS4308 Series Quick Start Guide, p/n MN000328A01 - provides general information for getting started with the DS4308 digital scanner, and includes basic set up and operation instructions.

•DS4308P Series Quick Start Guide, p/n MN000883A01 - provides general information for getting started with the DS4308P pedestal scanner, and includes basic set up and operation instructions.

•Advanced Data Formatting Programmer Guide, p/n 72E-69680-xx - provides information on ADF, a means of customizing data before transmission to a host.

•Attribute Data Dictionary, p/n 72E-149786-xx defines attribute numbers (device configuration parameters, monitored data, and born-on information) and describes management of various attribute domains for bar code scanners and OEM engines.

•ToshibaTEC Programmer’s Guide, p/n MN-002707-xx - provides information on programming the Toshiba TEC USB device type.

For the latest version of this guide and all guides, go to: http://www.zebra.com/support.

Service Information

If you have a problem using the equipment, contact your facility's technical or systems support. If there is a problem with the equipment, they will contact the Customer Support Center at: http://www.zebra.com/support.

When contacting support, please have the following information available:

•Serial number of the unit

•Model number or product name

•Software type and version number

Zebra responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements.

If your problem cannot be solved by support, you may need to return your equipment for servicing and will be given specific directions. Zebra is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty.

If you purchased your business product from a Zebra business partner, please contact that business partner for support.

CHAPTER 1 GETTING STARTED

Introduction

The DS4308 and DS4308P combine superior 1D and 2D omnidirectional bar code scanning and transfer with a light-weight, hands-free/hand-held design. The digital scanner’s gooseneck Intellistand seamlessly accommodates both countertop and hand-held use. Whether in hands-free (presentation) or hand-held mode, the digital scanner ensures comfort and ease of use for extended periods of time.

Figure 1-1 DS4308 and DS4308P Digital Scanner

1 - 2 DS4308/DS4308P Digital Scanner Product Reference Guide

Interfaces

The DS4308 digital scanner supports:

•USB connection to a host. The digital scanner autodetects a USB host and defaults to the HID keyboard interface type. Select other USB interface types by scanning programming bar code menus.This interface supports the following international keyboards (for Windows® environment): North America, German, French, French Canadian, Spanish, Italian, Swedish, UK English, Portuguese-Brazilian, and Japanese.

•Standard RS-232 connection to a host. Scan bar code menus to set up communication of the digital scanner with the host.

•Connection to IBM 468X/469X hosts. Scan bar code menus to set up communication of the digital scanner with the IBM terminal.

•Keyboard Wedge connection to a host. The host interprets scanned data as keystrokes. Scan bar code menus to set up communication of the digital scanner with the host. This interface supports the following international keyboards (for Windows® environment): North America, German, French International, French Canadian, French Belgian, Spanish, Italian, Swedish, UK English, Brazilian-Portuguese and Japanese.

•Configuration via 123Scan2.

NOTE For a list of supported scanner functionality by communication protocol, see Appendix I, Communication Protocol Functionality.

Unpacking

Remove the digital scanner from its packing and inspect it for damage. If the scanner was damaged in transit, contact support. See page xx for information. KEEP THE PACKING. It is the approved shipping container; use this to return the equipment for servicing.

Getting Started	1 - 3

Setting Up the Digital Scanner

Installing the Interface Cable

1.Insert the interface cable modular connector into the interface cable port on the rear of the digital scanner until you hear a click. For the DS4308P, tip the scanner forward in its base to best access the port. Low/medium/high beeps sound, indicating the scanner is operational.

Cable interface port

Interface cable modular connector clip

Interface cable modular connector

To host

Figure 1-2 Installing the Cable - DS4308 and DS4308P

IMPORTANT Insert the cable into the cable interface port until a click sounds.

When connecting the DS4308 using a USB cable, a shielded connector cable is required (e.g., p/n CBA-U21-S07ZAR). If upgrading an LS2208 or LS4208 to a DS4308, use the shielded connector cable.

2.Gently tug the cable to ensure the connector is secure.

3.Connect the other end of the interface cable to the host (see the specific host chapter for information on host connections).

1 - 4 DS4308/DS4308P Digital Scanner Product Reference Guide

Removing the Interface Cable

1.Press the cable’s modular connector clip through the access slot in the digital scanner’s base. For the DS4308P, tip the scanner forward in its base to best access the slot.

Figure 1-3 Removing the Cable - DS4308 and DS4308P

2.Carefully slide out the cable.

3.Follow the steps for Installing the Interface Cable to connect a new cable.

Connecting Power (if required)

If the host does not provide power to the digital scanner, connect an external power supply.

1.Plug the power supply into the power jack on the interface cable.

2.Plug the other end of the power supply into an AC outlet.

Configuring the Digital Scanner

To configure the digital scanner use the bar codes included in this manual, or use the 123Scan2 configuration program. See Chapter 4, User Preferences & Miscellaneous Options, and Chapter 11, Symbologies for information about programming the digital scanner using bar code menus. See Chapter 15, 123Scan and Software Tools for information on using this configuration program. Also see each host-specific chapter to set up connection to a specific host type.

Getting Started	1 - 5

Accessories

The digital scanner ships with the DS4308 Quick Start Guide. The following required accessories must be ordered:

•Interface cable for the appropriate interface.

•Shielded connector cable (e.g., p/n CBA-U21-S07ZAR) when connecting via USB. Refer to Solution Builder for guidance about cables.

NOTE If upgrading an LS2208 or LS4208 to a DS4308, the shielded connector cable must be used.

•Universal power supply, if the interface requires this.

•Gooseneck Intellistand for hands-free operation of the DS4308.

•Wall/table mount bracket for mounting the DS4308P.

For additional items, contact a local Zebra representative or business partner.

1 - 6 DS4308/DS4308P Digital Scanner Product Reference Guide

CHAPTER 2 DATA CAPTURE

Introduction

This chapter provides beeper and LED definitions, techniques involved in scanning bar codes, general instructions and tips about scanning, and decode ranges.

LED

Scan window

Scan window

Trigger

Trigger

Pedestal base

Figure 2-1 Parts of the DS4308 and DS4308P

2 - 2 DS4308/DS4308P Digital Scanner Product Reference Guide

Beeper Definitions

The digital scanner issues different beep sequences and patterns to indicate status. Table 2-1 defines beep sequences that occur during both normal scanning and while programming the digital scanner.

Table 2-1 Beeper Definitions

Beeper Sequence	Indication
Standard Use
Low/medium/high beeps	Power up.
Short beep, tone	A bar code symbol was decoded (if decode beeper is enabled).
programmable
4 long low beeps	Transmission error.
5 low beeps	Conversion or format error.
Low/low/low/extra low beeps	RS-232 receive error.
High beep	The digital scanner detected a <BEL> character over RS-232.
Parameter Menu Scanning
Low/high beeps	Input error; incorrect bar code, programming sequence, or Cancel scanned.
High/low beeps	Keyboard parameter selected. Enter value using numeric bar codes.
High/low/high/low beeps	Successful program exit with change in parameter setting.
ADF Programming
Low/low beeps	Enter another alphabetic character or scan the End of Message bar code.
Low/high/high beeps	All rules are deleted.
Low/high/low/high beeps	Out of rule memory. Erase some existing rules, then try to save rule again.
Low/high/low beeps	Cancel rule entry. Rule entry mode exited because of an error or the user
	asked to exit rule entry.
Low/high beeps	Entry error, wrong bar code scanned, or criteria/action list is too long for a rule.
	Re-enter criterion or action.
Low beep	Delete last saved rule. The current rule is left intact.
High/high beeps	ADF criteria or action is expected. Enter another criterion or action, or scan the
	Save Rule bar code.
High/low/low beeps	All criteria or actions cleared for current rule, continue entering rule.
High/low/high/low beeps	Rule saved. Rule entry mode exited.
Code 39 Buffering
Low/high/low beeps	The Code 39 buffer was erased or there was an attempt to clear or transmit an
	empty buffer.
High/low beeps	New Code 39 data was entered into the buffer.
3 long high beeps	Code 39 buffer is full.