Gebrauchsund Einbauanweisung |
Operating and assembly instructions |
|
|
ZANUSSI
GLASKERAMIK-KOCHFLÄCHEN |
D |
CERAMIC BUILT-IN HOBS |
GB |
ZG 1102 / ZGW 1302 / ZGW 1302 X
Dear customer |
( GB ) |
|
|
We congratulate you on choosing a ceramic hob of ZANUSSI. Thus you chose quality, innovation and durability. These operating and assembly instructions will allow you to become acquainted with the appliance and to do everything within its possibilities.
10
Content |
|
Please note in particular ........................................ |
12 |
Unpacking and control ........................................... |
13 |
Description of appliances ...................................... |
13 |
Technical data ....................................................... |
13 |
Operating your hob ................................................ |
14 |
Cookingequipment ............................................... |
14 |
Maintenance ......................................................... |
15 |
Installation............................................................. |
16 |
What to do in case of a defect............................... |
17 |
11
Please note in particular
• Before using the hob for the first time,readtheoperatingandassembly instructions carefully.
You protect yourself and avoid damage of your appliance.
•The appliance must be installed by a qualified electrician.
•Use the hob only upon its installation. This protects you from touching electric parts.
•Repairs of electric appliances must be undertaken by qualified electricians only. Improper repairs can cause serious harm and danger for the user.
•The appliance is only disconnected from the mains when the fuse is turned off or the mains connection is interrupted.
•Prevent little children from touching the cook top when in use.
Children also can burn themselves by pulling pans or pots off the hob.
•The cooking zones heat up quickly when they are turned on. Turn them on only when you have placed a cooking pan onto the cooking area.
•The residual heat indicator lights up to show if a cooking zone is still running resp. is still hot.
•If you use a socket close to the hob, take care that the cable of the appliance does not touch the hot surface of the hob.
•Be careful by using the hob as a working-table or when depositing items on the hob's surface. The items you place on the hob could easily catch fire when turning on the hob accidentally. Afterwards the hob should be cleaned thoroughly.
•Never leave the hob unattended when working with oil and fats because of the danger of fire.
•Sugar (solid or liquid) should never get onto the hot surface of the hob. Also, never use plastic or aluminium foil dishes. They melt at high temperatures and can cause fissures and cracks when the hob cools down. Spills of sugar or melted plastic or aluminium material must be removed while the hob is still warm and before the remains have set.
Scrape off the remains of sugar or plastic with a scra-per. Protect your hands.
•Use only pans with flat bases without rough edges to avoid remaining scratches.
•The ceramic hob surface is resistant to extreme temperatures. Neither cold nor heat can harm it. Avoid to drop anything on the hob. Punctiform impacts, e.g. by the fall of a salt shaker, can cause fissures and cracks.
•If any cracks appear on the hob surface, the hob has tobeswitchedoffimmediately.Disconnecttheappliance from the mains and inform the service department.
Adefectivehobsurfaceallowsoverboilingfoodtopenetrate and the contact with live parts.
•ZANUSSI declines any liability should the appliance be used improperly and the safety measures not be observed. Please note the maintenance and cleaning instructions carefully.
•Using other hobs than those of ZANUSSI-Brand excludes any liability.
Keep these operating and assembly instructions!
12
Loading...