REFRIGERATOR-
FREEZER
ZFK 61/27 R
ZFK 61/27 RAL
INSTRUCTION BOOKLET
2222 076-62/1
WARNINGS |
GB |
IT IS MOST IMPORTANT THAT THIS INSTRUCTION BOOK SHOULD BE RETAINED WITH THE APPLIANCE FOR FUTURE REFERENCE. SHOULD THE APPLIANCE BE SOLD OR TRANSFERRED TO ANOTHER OWNER, OR SHOULD YOU MOVE HOUSE AND LEAVE THE APPLIANCE, ALWAYS ENSURE THAT THE BOOK IS SUPPLIED WITH THE APPLIANCE IN ORDER THAT THE NEW OWNER CAN GET TO KNOW THE FUNCTIONING OF THE APPLIANCE AND THE RELEVANT WARNINGS.
THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY. YOU MUST READ THEM CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE.
General Safety
ªThis appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
ªIt is dangerous to alter the specifications or modify this product in any way.
ªCare must be taken to ensure that the appliance does not stand on the electrical supply cable.
ªBefore defrosting, cleaning or maintenance work is carried out, be sure to switch off the appliance and unplug it.
ªDo not remove items from the freezer if your hands are damp/wet, as this could cause skin abrasions or “frost/freezer burns”.
ªIce lollies can cause “frost/freezer burns” if consumed straight from the freezer.
ªFrozen food must NOT be re-frozen once it has thawed out.
ªDo not place carbonated or fizzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.
ªThe cooling plate or refrigerated freezer shelves in this appliance contain channels through which the refrigerant passes. If these are punctured this would cause substantial damage to the appliance and result in food loss. DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice. Under NO circumstances should solid ice be forced off the lining or shelves. Solid ice should be allowed to thaw, when defrosting the appliance. See Defrost instructions.
ªManufacturers’ storage recommendations should be strictly adhered to. Refer to relevant instructions.
Service / Repair
ªAny electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
ªThis product should be serviced by an authorised ZANUSSI Service Centre, and only genuine spare parts should be used.
ªUnder no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Refer to your local ZANUSSI Service Centre and always insist on genuine spare parts.
Use
ªZANUSSI domestic refrigerators, freezers and fridge/freezers are designed to be used specifically for the storage of edible foodstuffs only.
Installation
ªThere are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in possible food loss. See installation instructions.
ªParts which heat up should not be exposed. Wherever possible, the back of the appliance should be close to a wall but leaving the required distance for ventilation as stated in the installation instructions.
ªThe appliance should be left for 2 hours after installation before it is turned on in order to allow the refrigerant to settle.
ªThis appliance is heavy. Care should be taken when moving it.
2
CONSERVATION |
GB |
Environment Protection
ªThis appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from your municipal authorities.
The materials used on this appliance marked with the symbol 
are recyclable.
When disposing of your old fridge, freezer or fridge/freezer.
Help to keep your country tidy – use authorised disposal sites for your old appliances.
For maximum efficiency:
Make sure that the appliance is cleaned properly.
Make sure that the door is closed properly.
Do not position the appliance near to sources of heat.
Do not over-fill your appliance, air MUST be allowed to circulate.
2222 076-62/1 |
3 |
05/97
CONTENTS |
GB |
Description of the appliance |
5 |
|
Installation |
6 |
|
ª |
Positioning |
6 |
ª |
Rear spacers |
6 |
ª |
The electrical connections |
7 |
Technical specification |
8 |
|
ª |
Door reversal directions |
9 |
Operation |
10 |
|
ª |
Setting the temperature |
10 |
ª |
The freezer compartment |
10 |
ª |
Freezing fresh food |
10 |
ª |
Thawing |
10 |
ª |
Making ice cubes |
10 |
Health and safety guidelines |
11 |
|
ª |
Fresh food refrigeration |
12 |
ª |
Dual purpose meat box |
12 |
ª |
Positioning the door shelf |
12 |
ª |
Drink dispenser |
13 |
ª |
Use and features of the «CRISP’N FRESH» |
13 |
ª |
filter |
|
Cleaning the filter |
13 |
|
ª |
Cool check temperature guide |
14 |
ª |
Starting the appliance |
14 |
ª |
Everyday use of the cool check temperature |
14 |
ª |
guide |
|
Defrosting |
15 |
|
Maintenance and cleaning |
17 |
|
ª |
Internal cleaning |
17 |
ª |
External cleaning |
17 |
ª |
When the appliance is not in use, Interior light |
17 |
4
What happens if something goes wrong?
Guarantee conditions
18
19
DESCRIPTION OF THE APPLIANCE |
GB |
M
L
K
J
I
H 
A
B
C
D
E
3 |
9 |
F |
|
6 |
|||
12 |
|||
|
G
FAST |
FREEZE |
|
A - Thermostat control for fridge and freezer compartments
B- Dairy compartment
C- Can storage shelfs with egg trays
D- Drink dispenser
E- Bottle storage shelf
F- Freezer calender (recommended storage times for frozen foods) and produce storage card (write on / wipe off card for recording what has been stored in the freezer and when)
G- Freezing fresh foods
H- Storing frozen food
I- Salad drawers
J- Glass shelf (for storing fresh meat) with crisp’n fresh filter
K- Cool check temperature guide
L- Meat box
M- Storage shelves
5
INSTALLATION |
GB |
Warning
IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.
Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.
Positioning
This appliance is designed to operate in ambient temperatures between 10°C (50°F) and 32°C (90°F). It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a cooker or other sources of direct heat, or in a
very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these
temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.
You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (Fig. 1-A). Ideally, the appliance should not be positioned beneath overhanging furniture (Fig. 1-B). There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.
Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a spanner (see Fig. 2).
Rear spacers (Fig. 3)
In the bag with the documentation, there are two spacers which must be fitted in the two top corners.
Slacken the screws and insert the spacer under the screw head, then re-tighten the screws.
6
|
Fig. 1 |
100 mm |
|
A |
B |
10 mm |
10 mm |
NP002 |
|
|
Fig. 2 |
D200 |
|
|
Fig. 3 |
D594 |
|
Loading...