ZALMAN CNPS8900 Quiet Manual
User's Manual
CNPS8900 Series
Intel Socket 1366/1156/1155/775 CPUs AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2 CPU&APUs
To ensure safe and easy installation, please read the following precautions.
www.ZALMAN.com
Ver.121113
1. Precautions
1)Avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries.
2)Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention.
3)To prevent possible injuries, gloves must be worn while handling this product.
4)Excessive force exerted on the fan may cause damage to the fan and/or system.
5)Use and keep product away from reach of children.
6)Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
7)During transportation of the system, the cooler must be removed. Zalman is not responsible for any damages that occur during the transport of a system.
8)Product design and specifications may be revised to improve quality and performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
2. Specifications
|
Model |
CNPS8900 Extreme |
|
CNPS 8900 Quiet |
Spec. |
|
|||
|
|
|
||
|
|
|
|
|
Material |
Pure Copper and Aluminum |
|||
|
|
|
|
|
|
Weight |
|
400g |
|
|
|
|
|
|
Dimensions |
120(L) x 120(W) x 60(H)mm |
|||
|
|
|
|
|
|
Bearing |
2 Ball-Bearing |
|
Long Life Bearing |
|
|
|
|
|
Fan |
RPM |
1,250~2,800 rpm ± 10% |
|
1,000~1,500 rpm ± 10% |
|
|
|
|
|
Noise Level |
19.5 ~ 35dBA ± 10% |
|
19 ~ 25dBA ± 10% |
|
|
|
|||
|
|
|
|
|
|
Input Voltage |
|
12V |
|
|
|
|
|
|
3. Installation Requirements
1) Space Requirements |
60 mm |
The cooler’s installation requires an unobstructed space of 120mm(width), 120mm(length), and 60mm(height), with the CPU as a central reference point.
Please check if components such as ODDs and PSU protrude into the required space.
120 mm
120 mm
WWW.ZALMAN.COM |
1 |
4.Components
1) Common Components
Cooler |
Backplate |
Side Caps |
Nuts |
User’s Manual |
Bolts (Cooler) |
Bolts (Clip) |
Extension Fan Cable |
Loading Block |
Double-sided Tape |
Thermal Grease |
||
|
|
|
|
(ZM-STG2M) |
|
|
|
||
2)Intel Components |
3) AMD Components |
|||
|
|
|
|
|
|
|
|
|
|
Intel Clip |
AMD Clip |
(Socket 1366/1156/1155/775) |
(Socket FM2/FM1/AM3+/AM3/AM2+/ AM2) |
WWW.ZALMAN.COM |
2 |
5. Installation
Common
Connect the extension fan cable to the fan connector of cooler.
Cooler Fan connector
Extension Fan Cable
A. Intel Socket 1366/1156/1155/775 Installation
Install the Intel clip to the base of cooler using the bolts (Clip).
Please make sure to put the curved part of clip toward the base as shown in the image.
Intel Clip
WWW.ZALMAN.COM |
3 |
Loading...