ZALMAN 9700 User Manual

ZALMAN 9700 User Manual

(English version)



1)Compatible with all single and dual core CPUs for Intel’s Socket 775 and AMD’s Socket AM2/754/939/940.

2)100% copper heatsink with aerodynamically optimized “tunnel” design for maximum cooling efficiency.

3)Innovative and patented, curved heatpipe design for a heat transfer capacity of up to six heatpipes with the use of just three.

4)0.2mm ultra-slim fins for minimized weight and reduced airflow resistance.

5)Ultra quiet CNPS 110mm LED fan.

6)Does not generate noise or vibration in Silent Mode.

7)Adjustable fan speed controller (FAN MATE 2) included.

8)Super Thermal Grease (ZM-STG1) included.






Note(1) The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Sockets 754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer.

Note(2) The fan rotates at 2,800rpm if connected directly to the motherboard’s power connector without the use of FAN MATE 2.

Note(3) measured at 1m from noise source.

Note(4) Optimal Performance will be reached after approximately 7 days of regular computer use from the time of installation.


Heat sink


CPU Block Fixing Bolt




. No. 10-0600448

Reg. No. 30-0403411, 0403412

pending in over 20 nations around the world including USA, EU, and Japan.


on the fan may damage the fan, resulting in damage to the system. into the fan while it is in operation.

away from the reach of children and pets.

list and condition of the product before installation. If any problem is found, contact to obtain a replacement.

oral contact with the Thermal Grease. If ingested, get medical attention.

ot responsible for any damages due to external causes, including but not limited with electrical power, accident, neglect, alteration, repair, improper installation,



Controller (FAN MATE 2)

2 Cable



2)Components for AMD Sockets AM2/754/939/940

One (1) Clip for AMD Sockets

One (1) Clip Lever for AMD Sockets

3)Components for Intel Socket 775

One (1) Clip (S-Type)

Four (4) Bolts (for installing the cooler)

Four (4) Clip Support Fixing Bolts for Socket 775

One (1) Clip Support for Socket 775

One (1) Backplate for Socket 775


1)All Intel CPUs of Socket 775

2)All AMD CPUs of Socket AM2/754/939/940


+ 5 hidden pages