York BP 090 User Manual

	259336-YTG-B-0606
TECHNICAL	®
GUIDE 50 HZ

HIGH EFFICIENCY

SINGLE PACKAGE HEAT PUMPS

BP 090 & 120

7-1/2 and 10 NOMINAL TONS

9.1 EER

DESCRIPTION

YORK® Predator® heat pump units are convertible single packages with a common footprint cabinet and common roof curb for all 7-1/2 and 10 ton models. The units were designed for light commercial applications and can be easily installed on a roof curb, slab, or frame.

All Predator® heat pump units are self-contained and assembled on rigid full perimeter base rails allowing for 3-way forklift access and overhead rigging. Every unit is completely charged, wired, piped, and tested at the factory to provide a quick and easy field installation.

All units are convertible between side and down airflow. Independent economizer designs are used on side and down discharge applications, as well as all tonnage sizes.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

259336-YTG-B-0606

TABLE OF CONTENTS

DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FACTORY INSTALLED OPTIONS . . . . . . . . . . . . . . 5 FIELD INSTALLED ACCESSORIES . . . . . . . . . . . . . 6 NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

LIST OF FIGURES

Fig. #

Pg.#

1 PREDATOR® COMPONENT LOCATION . . . . . . . . . . .3 2 UNIT 4 POINT LOAD . . . . . . . . . . . . . . . . . . . . . . . . . .25 3 UNIT CENTER OF GRAVITY. . . . . . . . . . . . . . . . . . . .25 4 UNIT 6 POINT LOAD . . . . . . . . . . . . . . . . . . . . . . . . . .25 5 UNIT DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .26 6 PREDATOR® ROOF CURB DIMENSIONS . . . . . . . .27

7 SUNLINE™ TO PREDATOR® TRANSITION

ROOF CURBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 8 BOTTOM DUCT OPENINGS . . . . . . . . . . . . . . . . . . . .28 9 REAR DUCT DIMENSIONS. . . . . . . . . . . . . . . . . . . . .28 10 DOWNFLOW ECONOMIZER HOOD DETAIL. . . . . . .29

11FACTORY INSTALLED DOWNFLOW ECONOMIZER30

12FIELD INSTALLED DOWNFLOW ECONOMIZER

W/POWER EXHAUST. . . . . . . . . . . . . . . . . . . . . . . . .30

13 FIELD INSTALLED HORIZONTAL ECONOMIZER W/POWER EXHAUST . . . . . . . . . . . . . . . . . . . . . . . . .31

14 SLAB ECONOMIZER DOWNFLOW W/POWER EXHAUST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

15 SLAB ECONOMIZER END RETURN W/POWER EXHAUST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

16 7-1/2 & 10 TON HEAT PUMP WITH OR WITHOUT ELECTRIC HEAT WIRING DIAGRAM. . . . . . . . . . . . .33

LIST OF TABLES

Tbl. #

Pg.#

1 PHYSICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 2 BP CAPACITY RATINGS. . . . . . . . . . . . . . . . . . . . . . . .8

3 COOLING CAPACITY 7-1/2 TON HP COOL IMPERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

4 COOLING CAPACITY 7-1/2 TON HP COOL

METRIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

5 COOLING CAPACITY 10 TON HP COOL

IMPERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

6 COOLING CAPACITY 10 TON HP COOL

METRIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

7 HEATING APPLICATION DATA 7-1/2 TON HP HEAT (IMPERIAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

8 HEATING APPLICATION DATA 7 1/2 TON HP HEAT (METRIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

9 HEATING APPLICATION DATA 10 TON HP HEAT (IMPERIAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Tbl. #

Pg.#

10 HEATING APPLICATION DATA 10 TON HP HEAT (METRIC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

11 ELECTRICAL DATA - 7-1/2 TON HP . . . . . . . . . . . . . 17 12 ELECTRICAL DATA - 10 TON HP . . . . . . . . . . . . . . . 17 13 UNIT VOLTAGE LIMITATIONS . . . . . . . . . . . . . . . . . . 17 14 ELECTRIC HEAT MULTIPLIERS . . . . . . . . . . . . . . . . 17

15 BLOWER PERFORMANCE 7-1/2 TON

STANDARD MOTOR - SIDE DUCT (IMPERIAL) . . . . 18

16 BLOWER PERFORMANCE 7-1/2 TON

STANDARD MOTOR - SIDE DUCT (METRIC) . . . . . . 18

17 BLOWER PERFORMANCE 7-1/2 TON

OPTIONAL MOTOR - SIDE DUCT (IMPERIAL) . . . . . 18

18 BLOWER PERFORMANCE 7-1/2 TON OPTIONAL MOTOR - SIDE DUCT (METRIC) . . . . . . . . . . . . . . . . 19

19 BLOWER PERFORMANCE 10 TON STANDARD MOTOR - SIDE DUCT (IMPERIAL). . . . . . . . . . . . . . . 19

20 BLOWER PERFORMANCE 10 TON STANDARD MOTOR - SIDE DUCT (METRIC) . . . . . . . . . . . . . . . . 19

21 BLOWER PERFORMANCE 10 TON OPTIONAL MOTOR - SIDE DUCT (IMPERIAL). . . . . . . . . . . . . . . 20

22 BLOWER PERFORMANCE 10 TON OPTIONAL MOTOR - SIDE DUCT (METRIC) . . . . . . . . . . . . . . . . 20

23 BLOWER PERFORMANCE 7-1/2 TON STANDARD MOTOR - DOWNSHOT (IMPERIAL). . . . . . . . . . . . . . 21

24 BLOWER PERFORMANCE 7-1/2 TON STANDARD MOTOR - DOWNSHOT (METRIC) . . . . . . . . . . . . . . . 21

25 BLOWER PERFORMANCE 7-1/2 TON OPTIONAL MOTOR - DOWNSHOT (IMPERIAL). . . . . . . . . . . . . . 21

26 BLOWER PERFORMANCE 7-1/2 TON OPTIONAL MOTOR - DOWNSHOT (METRIC) . . . . . . . . . . . . . . . 22

27 BLOWER PERFORMANCE 10 TON STANDARD MOTOR - DOWNSHOT (IMPERIAL). . . . . . . . . . . . . . 22

28 BLOWER PERFORMANCE 10 TON STANDARD MOTOR - DOWNSHOT (METRIC). . . . . . . . . . . . . . . 22

29 BLOWER PERFORMANCE 10 TON OPTIONAL MOTOR - DOWNSHOT (IMPERIAL). . . . . . . . . . . . . . 23

30 BLOWER PERFORMANCE 10 TON OPTIONAL MOTOR - DOWNSHOT (METRIC) . . . . . . . . . . . . . . . 23

31 ADDITIONAL STATIC RESISTANCE - IMPERIAL . . . 24 32 ADDITIONAL STATIC RESISTANCE - METRIC. . . . . 24

33 ELECTRIC HEAT MINIMUM SUPPLY AIR -

IMPERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

34 ELECTRIC HEAT MINIMUM SUPPLY AIR -

METRIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 35 INDOOR BLOWER SPECIFICATIONS . . . . . . . . . . . . 25 36 4 POINT LOAD WEIGHT. . . . . . . . . . . . . . . . . . . . . . . 25 37 6 POINT LOAD WEIGHT. . . . . . . . . . . . . . . . . . . . . . . 26 38 UNIT WEIGHTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 39 UNIT CLEARANCES . . . . . . . . . . . . . . . . . . . . . . . . . . 26 40 ECONOMIZER USAGE . . . . . . . . . . . . . . . . . . . . . . . . 29

2	Unitary Products Group

259336-YTG-B-0606

Simplicity™ Control board w/screw connectors for T- stat wiring and network

connection

Terminal block for hi-voltage connection

Second Model

Nameplate Inside

Control Door

Dual stage cooling for maximum comfort (7-1/2 - 12-1/2 Only)

Compressor #2

Access (High-Eff

Compressor)

Base Rails w/

Forklift Slots (3

Sides) & Lifting

Holes

Roof curbs in eightand fourteen-inch heights. Roof curbs for transitioning from Sunline™ footprint to the BP series footprint are also available (field installed accessory)

Tool-less

Door Latch

Disconnect location (optional disconnect switch)

	Filter access	Filter drier (solid core)
	(2” throw-away)

Condenser

section

Slide-out motor and blower assembly for easy adjustment and service.

Belt-drive blower motor

Side entry power	Compressor #1 Access	Slide-out drain pain
and control wiring	(High-Eff Compressor)	with steel 3/4” NPT
knockouts		Connection

FIGURE 1 - PREDATOR® COMPONENT LOCATION

FEATURES

•High Efficiency – High efficiency units reach as high as 9.1 EER.

•Service Friendly – The Predator® incorporates a number of enhancements which improve serviceability.

The motor and blower slide out of the unit as a common assembly. This facilitates greater access to all the indoor airflow components, thus simplifying maintenance and adjustment.

Service time is reduced through the use of hinged, toolless panels. Such panels provide access to frequently inspected components and areas, including the control box, compressors, filters, indoor motor & blower, and the heating section. The panels are screwed in place at the factory to prevent access by children or other unauthorized persons. It is recommended that the panels be secured with screws once service is complete.

Service windows have been placed in both condenser section walls. Rotation of the cover allows easy access to the condenser coils for cleaning or inspection.

The unit control board utilizes flash codes to aid in diagnosis of unit malfunctions. Unique flash codes quickly identify the source of the unit alarm.

All units use the same standard filter size. This standardization removes any confusion on which filter sizes are needed for replacement.

The non-corrosive drain pan slides out of the unit to permit easy cleaning. The drain pan is accessed by removing the drain pan cover plate on the rear of the unit. Once the plate is removed, the drain pan slides out through the rear of the unit.

All Predator® units have a second model nameplate located inside the control access door. This is to prevent deterioration of the nameplate through weathering.

Unitary Products Group

3

•Environmentally Aware – For improved Indoor Air Quality, foil faced insulation is used exclusively throughout the units.

•Convertible Airflow Design – The side duct openings are covered when they leave the factory. If a side supply/return is desired, the installer simply removes the two side duct covers from the outside of the unit and installs them over the down shot openings. No panel cutting is required. Convertible airflow design allows maximum field flexibility and minimum inventory.

•System Protection - Suction line freezestats are supplied on all units to protect against loss of charge and coil frosting when the economizer operates at low outdoor air temperatures while the compressors are running. Every unit has solid-core liquid line filter-driers and high and lowpressure switches. Internal compressor protection is standard on all compressors. Crankcase heaters are standard on reciprocating compressors. Scroll compressors do not require crankcase heaters. Phase Monitors are standard on units with scroll compressors. This accessory monitors the incoming power to the unit and protects the unit from phase loss and reversed phase rotation.

•Advanced Controls - Simplicity™ control boards have standardized a number of features previously available only as options or by utilizing additional controls.

•Low Ambient - An integrated low-ambient control allows all units to operate in the cooling mode down to 0°F (-17.8°C) outdoor ambient without additional assistance. Optionally, thecontrol board can be programmed to lockout the compressors when the outdoor air temperature is low or when free cooling is available.

•Anti-Short Cycle Protection - To aid compressor life, an anti-short cycle delay is incorporated into the standard controls. Compressor reliability is further ensured by programmable minimum run times. For testing, the anti-short cycle delay can be temporarily overridden with the push of a button.

•Fan Delays - Fan on and fan off delays are fully programmable. Furthermore, the heating and cooling fan delay times are independent of one another. All units are programmed with default values based upon their configuration of cooling and heating.

•Safety Monitoring - The control board monitors the high and low-pressure switches, the freezestats and the temperature limit switch on electric heat units. The unit control board will alarm on compressor lockouts and repeated limit switch trips.

•Nuisance Trip Protection and Strikes - To prevent nuisance trouble calls, the control board uses a “three times, you’re out” philosophy. The high and low-pressure switches and the freezestats must trip

259336-YTG-B-0606

three times within two hours before the unit control board will lock out the associated compressor.

•On Board Diagnostics - Each alarm will energize a trouble light on the thermostat, if so equipped, and flash an alarm code on the control board LED. Each high and low-pressure switch alarm as well as each freezestat alarm has its own flash code. The control board saves the five most recent alarms in memory, and these alarms can be reviewed at any time. Alarms and programmed values are retained through the loss of power.

•Reliable – From the beginning – All units undergo computer automated testing before they leave the factory.

Units are tested for refrigerant charge and pressure, unit amperage, and 100% functionality. All Predator® units are painted with a long lasting, powder paint that stands up over the life of the unit. The paint used has been proven by a 750 hour salt spray test.

•Flexible Placement – All models and configurations share the same cabinet/footprint and thus the same roof curb. You have the flexibility to set one curb and choose the correct tonnage size after the internal loads have been determined.

To further simplify planning and installation, Predator® cabinets are designed to fit your roof. With the optional roof curb, the unit ductwork is designed to fit around 24” (610 mm) on-center joists or between 48” (1219 mm) oncenter joists.

The drain pan can be rotated to drain to either the front or the rear of the unit. Additionally, the drain pan can be fitted to drain through the roof curb. As it is sometimes difficult to have a level installation, the drain pan features a generous slope to ensure proper drainage.

•Full Perimeter Base Rails – The permanently attached base rails provide a solid foundation for the entire unit and protect the unit during shipment. The rails offer forklift access from 3 sides, and rigging holes are available so that an overhead crane can be used to place the units on a roof.

•Easy Installation – Electric utility knockouts are supplied in the unit underside as well as the side of the unit. A clearly identified location is provided to mount a field supplied electrical disconnect switch. Utility connections can be made quickly and with a minimum amount of field labor.

All units are shipped with 2” (51 mm) throw-away filters installed.

•Wide Range of Indoor Airflows – All indoor fan motors are belt-drive type providing maximum flexibility to handle most airflow requirements. For high static applications, factory installed alternate indoor fan motors are available. With the optional indoor fan motor, all units can supply nominal airflow at up to 1.5” (375 Pa) ESP.

4	Unitary Products Group

259336-YTG-B-0606

FACTORY INSTALLED OPTIONS

YORK® offers several equipment options factory installed, for the Predator® line.

•Optional Factory Installed Economizers - Predator units offer a variety of optional factory installed economizers with low leak dampers. The outdoor air enthalpy sensor enables economizer operation if the outdoor enthalpy is less than the setpoint of the economizer logic module. See Table 41 to determine the correct economizer for your application.

•Downflow Economizer - (With barometric relief) - The economizer is provided with a single enthalpy input. The economizer is 2% low leakage type, and is shipped installed and wired. The installer needs only to assemble and mount the outdoor air hood (Provided). The economizer has spring return, fully modulating damper actuators and is capable of introducing up to 100% outdoor air. As the outdoor air intake dampers open, the return air dampers close. The changeover from mechanical refrigeration to economizer operation is regulated by the standard single enthalpy input. There is an optional input dual dry bulb available. To meet regulated air standards, the

economizer control accepts an optional CO2 input for demand ventilation. With single enthalpy input, the economizer control monitors outdoor air. The dual enthalpy kit provides a second input used to monitor the return air. With a dual input kit installed, the economizer control compares the values of the two enthalpy or temperature inputs and positions the dampers to provide the maximum efficiency possible.

•Horizontal Economizer - (Without barometric relief) - All features as the downflow economizer exist except you must order the barometric relief separately. You must order a 1EH0408 if you are installing a power exhaust. You can order a 1RD0411 Barometric Relief for horizontal flow economizers only.

•BAS Ready Economizer -(With barometric relief)

- The economizer is provided with a Belimo actuator that requires a 0-10V DC input from an external source (i.e., field installed building automation system controller). Power exhaust options are available. The economizer is 2% low leakage type with spring return and fully modulating dampers capable of introducing up to 100% outside air. Also include 2” (51 mm) pleated filters.

•Power Exhaust (Downflow only) - This accessory installs in the unit with a down flow economizer.

•Motorized Outdoor Air Damper - The motorized outdoor air damper includes a slide-in/plug-in damper assembly with an outdoor air hood and filters. The outdoor air dampers open to the preset position when the indoor fan motor is energized. The damper has a range of 0% to 100% outdoor air entry. Factory installed option or field installed accessory.

•Alternate Indoor Blower Motor - For applications with high static restrictions, units are offered with optional indoor motors that provide higher static output and/or higher airflow, depending upon the installer’s needs.

•Electric Heaters - The electric heaters range from 9kW to 54kW and are available in all the voltage options of the base units. All heaters are dual staged. All heaters are intended for single point power supply.

•Disconnect Switch - For heat pumps with electric heat, a HACR breaker sized to the unit is provided. For heat pump only units, a switch sized to the largest electric heat available for the particular unit is provided. Factory installed option only.

•Smoke Detectors - The smoke detectors stop operation of the unit by interrupting power to the control board if smoke is detected within the air compartment. Available for both the supply and/or return air.

Factory installed smoke detectors in the return air, may be subjected to freezing temperatures during "off" times due to out side air infiltration. These smoke detectors have an operational limit of 32 °F to 131°F. Smoke detectors installed in areas that could be out side those limitations will have to be moved to prevent having false alarms.

•Phase Monitors - Designed to prevent unit damage. The phase monitor will shut the unit down in an out-of phase condition. (Standard on units with Scroll Compressors.)

•Coil Guard - Customers can purchase a coil guard kit to protect the condenser coil from damage. Additionally, this kit stops animals and foreign objects from entering the space between the inner condenser coil and the main cabinet. This is not a hail guard kit.

•Dirty Filter Switch - This kit includes a differential pressure switch that energizes the fault light on the unit thermostat, indicating that there is an abnormally high pressure drop across the filters. Factory installed option or field installed accessory.

•Technicoat Condenser Coils - The condenser coils are coated with a phenolic coating for protection against corrosion due to harsh environments.

•Technicoat Evaporator Coil - The evaporator coils are coated with a phenolic coating for protection against corrosion due to harsh environments.

•Novar® BAS Control - The Novar® ETC-3 building automation system controller is factory installed. Incudes supply air sensor, return air sensor, dirty filter indicator switch, and air proving switch.

•Johnson Controls BAS Control - The Johnson Control YK-UNT-1126 building automation system controller is factory installed. Includes supply air sensor, return air sensor, dirty filter indicator switch, and air proving switch.

Unitary Products Group

5

•CPC BAS Control - The Computer Process Controls Model 810-3060 ARTC Advanced Rooftop building automation system controller is factory installed. Includes supply air sensor, return air sensor, dirty filter indicator switch, and air proving switch.

•Honeywell BAS Control - The Honeywell W7750C building automation system controller is factory installed. Includes air supply sensor, return air sensor, dirty filter indicator switch, and air proving switch.

FIELD INSTALLED ACCESSORIES

YORK® offers several equipment accessories for field installation, for the Predator® line.

•Downflow Economizer - (With barometric relief) - The economizer is provided with a single enthalpy input. The economizer is 2% low leakage type. The economizer has spring return, fully modulating damper actuators and is capable of introducing up to 100% outdoor air. As the outdoor air intake dampers open, the return air dampers close. The changeover from mechanical refrigeration to economizer operation is regulated by the standard single enthalpy input. There is an optional input dual dry bulb available. To meet regulated air standards, the econo-

mizer control accepts an optional CO2 input for demand ventilation.With single enthalpy input, the economizer control monitors outdoor air. The dual enthalpy kit provides a second input used to monitor the return air. With a dual input kit installed, the economizer control compares the values of the two enthalpy or temperature inputs and positions the dampers to provide the maximum efficiency possible

•Horizontal Economizer - (Without barometric relief) - All features as the downflow economizer exist except you must order the barometric relief separately. You must order a 1EH0408 if you are installing a power exhaust. You can order a 1RD0411 Barometric Relief for horizontal flow economizers only.

•Dual Enthalpy Control, Accessory - This kit contains the required components to convert a single enthalpy economizer to dual enthalpy.

•Barometric Relief Damper - Zero to 100% capacity barometric relief dampers for use with horizontal flow, or field installed slab economizers.

•Power Exhaust - This accessory installs in the unit with a down flow economizer. Power exhaust plugs into the connector in the unit bulkhead. You must purchase

1EH0408 barometric relief/power exhaust hood when applying to a horizontal flow application.

•Manual Outdoor Air Damper - Like the motorized outdoor air damper, each manual outdoor air damper includes a slide-in damper assembly with an outdoor air hood and filters. Customers have a choice of dampers with ranges of 0% to 100% or 0% to 35% outdoor air entry.

259336-YTG-B-0606

•Motorized Outdoor Air Damper - The motorized outdoor air damper includes a slide-in/plug-in damper assembly with an outdoor air hood and filters. The out-

door air dampers open to the preset position when the indoor fan motor is energized. The damper has a range of 0% to 100% outdoor air entry. Factory installed option or field installed accessory.

•Smoke Detectors - The smoke detectors stop operation of the unit by interrupting power to the control board if smoke is detected within the air compartment.

•CO2 Sensor - Senses CO2 levels and automatically overrides the economizer when levels rise above the preset limits.

•Dirty Filter Switch - This kit includes a differential pressure switch that energizes the fault light on the unit thermostat, indicating that there is an abnormally high pressure drop across the filters.

•Coil Guard - Field installed decorative wire coil guard.

•Hail Guard - This kit includes a sloped hood which installs over the outside condenser coil and prevents damage to the coil fins from hail strikes. Field installed accessory only.

•Electric Heaters - The electric heaters range from 9 kW to 54kW and are available in all the voltage options of the base units. All heaters are dual staged. Cooling units include an adapter panel for easy installation of the electric heaters. Necessary hardware and connectors are included with the heaters. All heaters are intended for single point power supply.

•Metal Frame Filter Kit - Metal frame with polyester filter medium.

•Permanent Filters - Permanent filters are available.

•Roof Curbs - The roof curbs have insulated decks and are shipped disassembled The roof curbs are available in 8” (203 mm) and 14” (356 mm) heights. For applications with security concerns, burglar bars are available for the duct openings of the roof curbs.

•Roof Curb Transition - Single Piece Adapter (10” (254

mm) High) - Roof curbs for transitioning from Sunline™ units to Predator® Magnum. Fits 7.5 to 12.5 Sunline™ roof curbs only.

•Burglar Bars - Mount in the supply and return openings to prevent entry into the duct work.

•Thermostat - The units are designed to operate with 24volt electronic and electro-mechanical thermostats. All units (with or without an economizer) operate with twostage heat/two-stage cool or two-stage cooling only thermostats, depending upon unit configuration.

6	Unitary Products Group

259336-YTG-B-0606

NOMENCLATURE

7.5-10.0 Ton York® Model Number Nomenclature

B P 090 C00 A 7 A AA 3 0 1 2 4 A

Product Category

B = HP, Single Pkg., R-22

Product Identifier

P = 9.3-10.6 EER HP

Nominal Cooling Capacity

090 = 7.5 Ton

120 = 10.0 Ton

Heat Type and Nominal Heat Capacity

C00 = Cooling Only. No heat installed

Electric Heat Options

E09 = 9 KW

E18 = 18 KW

E24 = 24 KW

E36 = 36 KW

E54 = 54 KW

Airflow

A = Std. Motor

B = Std. Motor/Econo./Barometric Relief (Downflow

Only)

C = Std. Motor/Econo./Power Exhaust (Downflow Only)

D = Std. Motor/Motorized Damper (Downflow Only)

E = Std. Motor/Horizontal Economizer (No Baro.)

F = Std. Motor/Slab Econo./Power Exhaust

(Downflow Only)

G = Std. Motor/Slab Econo./Barometric Relief

(Downflow Only)

N = Hi Static Mtr.

P = Hi Static Mtr./Econo./Barometric Relief

(Downflow Only)

Q = Hi Static Mtr./Econo./Power Exhaust

(Downflow Only)

R = Hi Static Mtr./Motorized Damper (Downflow Only)

S = Hi Static Mtr./Horizontal Economizer (No Baro.)

T = Hi Static Mtr./Slab Econo./Power Exhaust

(Downflow Only)

U = Hi Static Mtr./Slab Econo./Barometric Relief

(Downflow only)

Voltage

7 = 380/415-3-50

Product Style

A = Style A

B = Style B

C = Style C

Configuration Options (not required for all units)

These four digits will not be assigned until a quote is requested, or an order placed.

SS Drain Pan

Honeywell Controller, DFS, APS

Simplicity IntelliComfort Controller

Simplicity IntelliComfort Controller w/ModLinc

2" Pleated filters

BAS Ready Unit with Belimo Economizer

Shipping Bag

Any Combination of Additional Options that Don’t Have an Option Code Pre-assigned

		Product Generation
	3	= Third Generation
	4	= Fourth Generation
			Additional Options

AA = None	RC = Coil Guard, Shipping Bag & American Flag
AB = Phase Monitor	TA = Technicoat Condenser Coil
AC = Coil Guard	TJ = Technicoat Evaporator Coil
AD = Dirty Filter Switch	TS = Technicoat Evaporator & Condenser Coils
AE = Phase Monitor & Coil Guard
AF = Phase Monitor & Dirty Filter Switch
AG = Coil Guard & Dirty Filter Switch
AH = Phase Monitor, Coil Guard & Dirty Filter Switch

ZZ= If desired option combination is not listed above, ZZ will be assigned and configuration options will be located in digits 15-18.

Installation Options

A = No Options Installed

B = Option 1

C = Option 2

D = Options 1 & 2

E = Option 3

F = Option 4

G = Options 1 & 3

H = Options 1 & 4

J = Options 1, 2 & 3

K = Options 1, 2, & 4

L = Options 1,3 & 4

M = Options 1, 2, 3, & 4

N = Options 2 & 3

P = Options 2 & 4

Q = Options 2, 3, & 4

R = Options 3 & 4

S = Option 5

T = Options 1 & 5

U = Options 1, 3, & 5

V = Options 1, 4, & 5

W = Options 1, 3, 4, & 5

X = Options 3 & 5

Y = Options 4 & 5

Z = Options 3, 4 & 5

Options

1 = Disconnect

2 = Non-Pwr'd Conv. Outlet

3 = Smoke Detector S.A.

4 = Smoke Detector R.A.

5 = Pwr'd Conv. Outlet

Unitary Products Group

7

259336-YTG-B-0606

TABLE 1: PHYSICAL DATA

		COMPONENT	MODELS
			090	120
	Evaporator	Blower, Centrifugal Dia. X Wd. in. (Dia. X Wd. mm)	15 x 15 (381 x 381)	15 x 15 (381 x 381)
		Motor, Standard HP (kW)	1-1/2 (1.1)	2 (1.5)
	Blower
		Motor, Optional HP (kW)	2 (1.5)	4 (3)
		Rows	3	4
	Evaporator Coil	Fins per Inch (2.54 cm.)	15	15
		Height in. (mm)	40 (1020)	40 (1020)
		Face Area ft.2 each (m2)	13.2 (1.23)	13.2 (1.23)
	Condenser Fan	Propeller Dia. in., each (mm)	24 (610)	24 (610)
		Motor HP, each (kW)	3/4 (.56)	3/4 (.56)
	(2 per Unit)
		CFM, Nominal (each)	4000	4000
		Rows (each)	1	2
	Condenser Coil	Fins per Inch (2.54 cm)	20	20
	(2 per unit)	Height in., each (mm)	44 (1120)	44 (1120)
		Face Area ft.2 each (mm)	14.5 (1.35)	14.5 (1.35)
	Refrigerant	System 1 lb./oz. (kg)	9 lbs. 4 oz. (4.20)	15 lbs. 4 oz. (6.92)
	Charge	System 2 lb./oz. (kg)	9 lbs. 0 oz. (4.06)	15 lbs. 0 oz. (6.80)
	Compressors	Quantity	2	2
		Type	Recip	Scroll
		Size Wd. x Ht. x Thickness in.	25x20x2	25x20x2
	Air Filters	(Wd. x Ht x Thickness mm)	(635 x 508 x 51)	(635 x 508 x 51)
		Number Per Unit	4	4

TABLE 2: BP CAPACITY RATINGS

SIZE	COOLING CAPACITY ARI RATINGS*						HEATING CAPACITY			SOUND	NOM ELEC
				CFM						RATING	HEAT CAP	‡
(TONS)	MBH	EER	IPLV			MBH @	COP @	MBH @	COP @
										(dB)†
						47° F	47°F	17°F	17°F		(kW)
7-1/2	93	9.1	7.5	3000		86	3.1	44	2.0	84	9, 18, 24 34
(090)
10	120	9.4	9.4	4000		116	3.15	75	2.25	85	18, 24, 34 54
(120)
* Rated at 95°F ambient 80°F dry bulb and 67°F wet bulb.
† Rated in accordance with ARI 270 standard.
‡ See Table 14.

8	Unitary Products Group

259336-YTG-B-0606

TABLE 3: COOLING CAPACITY 7-1/2 TON HP COOL IMPERIAL

Air On			Temperature of Air on Condenser Coil 85°F											Temperature of Air on Condenser Coil 95°F
Evap. Coil
	WB	Tot.	Tot.		Sensible Capacity (MBH)*								Tot.		Tot.			Sensible Capacity (MBH)*
CFM		Cap.*	Input†			Return Dry Bulb (°F)							Cap.*		Input†				Return Dry Bulb (°F)
	(°F)	(MBH)	(kW)										(MBH)		(kW)
				86	83		80	77	74		71	68				86		83		80	77	74	71	68
	72	109	8.7	61	55		48	42	35		#N/A	#N/A	104		9.4	58		52		45	39	33	#N/A	#N/A
2250	67	98	8.4	74	68		62	55	49		42	36	92		8.9	72		66		59	53	46	40	34
	62	89	8.0	88	81		75	69	62		56	49	83		8.6	83		79		73	66	60	53	47
	57	95	8.0	93	87		80	74	68		61	55	84		8.5	84		82		75	69	62	56	50
	72	112	8.8	67	59		52	44	36		#N/A	#N/A	106		9.5	64		56		49	41	34	#N/A	#N/A
2625	67	101	8.5	81	74		66	58	51		43	36	94		9.0	79		71		64	56	49	41	33
	62	92	8.1	91	88		80	73	65		58	50	85		8.7	85		83		78	70	63	55	48
	57	97	8.1	97	93		86	79	71		63	56	86		8.6	86		85		81	73	66	58	51
	72	115	8.9	73	64		55	46	38		#N/A	#N/A	109		9.6	70		61		52	43	35	#N/A	#N/A
3000	67	104	8.5	88	79		70	62	53		44	35	97		9.1	86		77		68	59	51	42	33
	62	94	8.2	94	94		86	77	68		59	51	88		8.8	88		88		83	75	66	57	48
	57	100	8.1	100	100		92	83	75		66	57	88		8.7	88		88		86	78	69	60	51
	72	117	8.9	78	68		58	48	38		#N/A	#N/A	112		9.7	75		65		55	45	35	#N/A	#N/A
3375	67	106	8.6	94	84		74	64	54		44	34	99		9.2	92		82		72	62	52	42	32
	62	96	8.2	96	96		90	80	70		60	50	90		8.9	90		90		88	78	68	58	48
	57	102	8.2	102	102		97	87	77		67	57	91		8.8	91		91		90	80	70	60	50
	72	120	9.0	83	72		61	50	38		#N/A	#N/A	115		9.8	80		69		58	47	35	#N/A	#N/A
3750	67	108	8.6	100	89		78	66	55		44	33	102		9.3	98		87		76	64	53	42	31
	62	98	8.3	98	98		94	83	72		61	50	92		8.9	92		92		92	81	70	59	48
	57	104	8.2	104	104		101	90	79		68	57	93		8.9	93		93		93	82	71	60	49
			Temperature of Air on Condenser Coil 105°F											Temperature of Air on Condenser Coil 115°F
	72	101	10.1	60	53		47	40	34		#N/A	#N/A	98		10.9	61		55		48	42	35	#N/A	#N/A
2250	67	88	9.6	74	67		61	54	48		42	35	84		10.3	75		69		62	56	50	43	37
	62	79	9.2	79	77		74	67	61		54	48	74		9.9	74		74		74	68	62	55	49
	57	79	9.2	79	78		75	68	62		55	49	74		9.9	74		74		74	68	61	55	48
	72	102	10.2	64	56		48	41	33		#N/A	#N/A	99		10.9	63		56		48	41	33	#N/A	#N/A
2625	67	89	9.7	78	71		63	56	48		40	33	84		10.3	78		70		63	55	47	40	32
	62	80	9.3	80	79		76	69	61		54	46	75		9.9	75		75		75	67	59	52	44
	57	80	9.2	80	80		77	70	62		55	47	74		9.9	74		74		74	67	59	51	44
	72	104	10.2	68	59		50	41	33		#N/A	#N/A	99		10.9	66		57		48	39	31	#N/A	#N/A
3000	67	90	9.7	83	74		65	57	48		39	30	84		10.3	80		71		63	54	45	36	28
	62	81	9.3	81	81		79	70	62		53	44	75		9.9	75		75		75	66	57	49	40
	57	81	9.3	81	81		80	72	63		54	45	74		9.9	74		74		74	66	57	48	39
	72	106	10.3	73	63		53	43	33		#N/A	#N/A	100		11.0	72		62		52	42	32	#N/A	#N/A
3375	67	92	9.8	88	79		69	59	49		39	30	85		10.4	83		77		67	57	47	37	27
	62	83	9.4	83	83		82	72	62		52	42	76		10.0	76		76		76	66	56	46	36
	57	83	9.4	83	83		83	73	63		53	43	75		9.9	75		75		75	65	55	45	35
	72	108	10.4	79	68		56	45	34		#N/A	#N/A	102		11.0	77		66		55	44	33	#N/A	#N/A
3750	67	94	9.9	92	85		73	62	51		40	29	86		10.5	86		82		71	60	49	38	27
	62	85	9.5	85	85		85	73	62		51	40	77		10.0	77		77		77	66	54	43	32
	57	85	9.4	85	85		85	74	62		51	40	76		10.0	76		76		76	65	54	43	32
			Temperature of Air on Condenser Coil 125°F
	72	96	11.6	62	56		50	43	37		#N/A	#N/A	* These capacities are gross ratings. For net
2250	67	80	11.0	77	70		64	58	51		45	38
															capacity, deduct air blower motor, MBH = 3.415
	62	70	10.5	70	70		70	69	62		56	50
															x kW. Refer to the appropriate Blower Perfor-
	57	69	10.5	69	69		69	67	60		54	48
	72	95	11.6	63	55		48	40	33		#N/A	#N/A			mance Table for the kW of the supply air
2625	67	79	11.0	77	70		62	54	47		39	32			blower motor.
	62	69	10.5	69	69		69	65	58		50	43	†		These ratings include condenser fan motors
	57	68	10.5	68	68		68	63	56		48	40			and the compressor motors but not the supply
	72	94	11.5	64	55		46	38	29		#N/A	#N/A
															air blower motor.
3000	67	78	11.0	77	69		60	51	42		34	25
	62	68	10.5	68	68		68	62	53		44	35
	57	67	10.4	67	67		67	60	51		42	33
	72	95	11.6	70	60		50	40	30		#N/A	#N/A
3375	67	78	11.0	78	74		64	55	45		35	25
	62	69	10.5	69	69		69	60	50		40	30
	57	68	10.5	68	68		68	58	48		38	28
	72	95	11.6	76	65		54	42	31		#N/A	#N/A
3750	67	79	11.1	79	79		69	58	47		36	24
	62	69	10.6	69	69		69	58	47		35	24
	57	68	10.5	68	68		68	57	46		34	23

Unitary Products Group

9

																					259336-YTG-B-0606
TABLE 4: COOLING CAPACITY 7-1/2 TON HP COOL METRIC
Return				Outdoor Ambient Temperature (C) 29											Outdoor Ambient Temperature (C) 35
Air
		WB	Gross	Tot.			Sensible Capacity (kW)*							Gross	Tot.			Sensible Capacity (kW)*
m3s			Cap.*	Input†			Return Dry Bulb (°C)							Cap.*	Input†				Return Dry Bulb (°C)
		(°C)
			(kW)	(kW)	30	28		27	25	23		22	20	(kW)	(kW)	30		28		27	25	23	22	20
		22	32	8.7	17	16		14	12	11		#N/A	#N/A	30	9.4	17		15		13	12	10	#N/A	#N/A
1.06		19	29	8.4	21	20		18	16	15		13	11	27	8.9	21		19		17	16	14	12	11
		17	26	8.0	25	24		22	20	19		17	15	24	8.6	24		23		21	20	18	16	15
		14	28	8.0	27	25		24	22	20		19	17	25	8.5	25		24		22	20	19	17	15
		22	33	8.8	19	17		15	13	11		#N/A	#N/A	31	9.5	18		16		14	12	10	#N/A	#N/A
1.24		19	30	8.5	23	21		19	17	15		13	11	28	9.0	23		21		19	17	15	13	11
		17	27	8.1	26	26		24	22	20		18	16	25	8.7	25		24		23	21	19	17	15
		14	29	8.1	28	27		25	23	21		19	17	25	8.6	25		25		24	22	20	18	16
		22	34	8.9	21	18		16	14	12		#N/A	#N/A	32	9.6	20		18		15	13	11	#N/A	#N/A
1.42		19	30	8.5	25	23		21	18	16		14	11	28	9.1	25		22		20	18	15	13	11
		17	28	8.2	28	27		25	23	21		18	16	26	8.8	26		26		24	22	20	18	15
		14	29	8.1	29	29		27	25	22		20	18	26	8.7	26		26		25	23	21	18	16
		22	34	8.9	22	20		17	14	12		#N/A	#N/A	33	9.7	21		19		16	13	11	#N/A	#N/A
1.53		19	31	8.6	27	24		22	19	16		14	11	29	9.2	26		24		21	18	16	13	11
		17	28	8.2	28	28		26	24	21		19	16	26	8.9	26		26		26	23	21	18	15
		14	30	8.2	30	30		28	26	23		20	18	27	8.8	27		27		26	24	21	18	16
		22	35	9.0	24	21		18	15	12		#N/A	#N/A	34	9.8	23		20		17	14	11	#N/A	#N/A
1.77		19	32	8.6	29	26		23	20	17		14	11	30	9.3	28		25		22	19	16	13	10
		17	29	8.3	29	29		28	25	22		19	16	27	8.9	27		27		27	24	21	18	15
		14	31	8.2	31	31		30	27	24		21	18	27	8.9	27		27		27	24	21	19	16
				Outdoor Ambient Temperature (C) 41											Outdoor Ambient Temperature (C) 46
		22	30	10.1	17	15		14	12	10		#N/A	#N/A	29	10.9	17		16		14	12	11	#N/A	#N/A
1.06		19	26	9.6	21	20		18	16	14		13	11	25	10.3	22		20		18	17	15	13	12
		17	23	9.2	23	22		22	20	18		16	15	22	9.9	22		22		22	20	18	17	15
		14	23	9.2	23	23		22	20	18		17	15	22	9.9	22		22		22	20	18	17	15
		22	30	10.2	18	16		14	12	10		#N/A	#N/A	29	10.9	18		16		14	12	10	#N/A	#N/A
1.24		19	26	9.7	22	20		18	17	15		13	11	25	10.3	22		20		18	16	14	12	10
		17	23	9.3	23	23		22	20	18		16	14	22	9.9	22		22		22	20	18	16	14
		14	24	9.2	24	23		23	21	19		17	15	22	9.9	22		22		22	20	18	16	14
		22	30	10.2	19	17		15	12	10		#N/A	#N/A	29	10.9	19		16		14	12	10	#N/A	#N/A
1.42		19	27	9.7	24	21		19	17	15		12	10	25	10.3	23		21		18	16	14	11	9
		17	24	9.3	24	24		23	21	19		16	14	22	9.9	22		22		22	20	17	15	13
		14	24	9.3	24	24		24	21	19		17	14	22	9.9	22		22		22	19	17	15	13
		22	31	10.3	21	18		16	13	10		#N/A	#N/A	29	11.0	20		18		15	13	10	#N/A	#N/A
1.53		19	27	9.8	25	23		20	18	15		12	10	25	10.4	24		22		20	17	14	12	9
		17	24	9.4	24	24		24	21	19		16	14	22	10.0	22		22		22	20	17	14	12
		14	24	9.4	24	24		24	22	19		16	14	22	9.9	22		22		22	19	17	14	12
		22	32	10.4	22	19		17	14	11		#N/A	#N/A	30	11.0	22		19		16	13	10	#N/A	#N/A
1.77		19	28	9.9	27	24		22	19	16		13	10	25	10.5	25		24		21	18	15	12	9
		17	25	9.5	25	25		25	22	19		16	13	22	10.0	22		22		22	20	17	14	11
		14	25	9.4	25	25		25	22	19		16	13	22	10.0	22		22		22	19	17	14	11
				Outdoor Ambient Temperature (C) 52
		22	28	11.6	18	16		15	13	11		#N/A	#N/A	* These capacities are gross ratings. For net
1.06		19	23	11.0	22	20		19	17	15		14	12
															capacity, deduct air blower motor, kW. Refer to
		17	20	10.5	20	20		20	20	19		17	15
															the appropriate Blower Performance Table for
		14	20	10.5	20	20		20	20	18		16	15
		22	28	11.6	18	16		14	12	10		#N/A	#N/A		the kW of the supply air blower motor.
1.24		19	23	11.0	22	20		18	16	14		12	10	†	These ratings include condenser fan motors
		17	20	10.5	20	20		20	19	17		15	13		and the compressor motors but not the supply
		14	20	10.5	20	20		20	19	17		15	13		air blower motor.
		22	28	11.5	18	16		14	11	9		#N/A	#N/A
1.42		19	23	11.0	22	20		18	15	13		11	8
		17	20	10.5	20	20		20	18	16		14	11
		14	20	10.4	20	20		20	18	15		13	11
		22	28	11.6	20	17		15	12	9		#N/A	#N/A
1.53		19	23	11.0	23	22		19	16	14		11	8
		17	20	10.5	20	20		20	18	15		13	10
		14	20	10.5	20	20		20	17	15		12	10
		22	28	11.6	22	19		16	13	10		#N/A	#N/A
1.77		19	23	11.1	23	23		20	17	14		11	9
		17	20	10.6	20	20		20	17	14		11	8
		14	20	10.5	20	20		20	17	14		11	8

10	Unitary Products Group

259336-YTG-B-0606

TABLE 5: COOLING CAPACITY 10 TON HP COOL IMPERIAL

Air On			Temperature of Air on Condenser Coil 85°F											Temperature of Air on Condenser Coil 95°F
Evap. Coil
	WB	Tot.	Tot.		Sensible Capacity (MBH)*								Tot.		Tot.			Sensible Capacity (MBH)*
CFM		Cap.*	Input†			Return Dry Bulb (°F)							Cap.*		Input†			Return Dry Bulb (°F)
	(°F)	(MBH)	(kW)										(MBH)		(kW)
				86	83		80	77	74		71	68				86		83	80	77	74		71	68
	72	130	9.9	78	69		61	52	44		35	26	127		11.0	77		69	60	51	43		34	26
3000	67	123	9.7	100	91		83	74	66		57	49	119		10.8	98		90	81	72	64		55	47
	62	115	9.6	115	109		100	92	83		75	66	111		10.6	111		109	100	92	83		74	66
	57	113	9.5	113	110		102	93	85		76	68	109		10.6	109		107	99	90	81		73	64
	72	134	10.0	86	76		66	56	46		36	26	130		11.1	86		75	65	55	45		35	25
3500	67	127	9.8	110	100		90	80	70		60	50	122		10.9	108		98	88	78	68		58	48
	62	119	9.6	119	116		109	99	89		79	69	115		10.7	115		113	109	99	89		79	69
	57	117	9.6	117	115		111	101	91		81	70	113		10.7	113		112	107	97	87		77	67
	72	137	10.1	95	83		71	60	48		36	25	134		11.2	94		82	71	59	47		36	24
4000	67	131	9.9	121	109		98	86	74		63	51	126		10.9	119		107	95	84	72		61	49
	62	122	9.7	122	122		118	107	95		83	72	118		10.7	118		118	118	106	95		83	71
	57	120	9.6	120	120		120	108	97		85	73	116		10.7	116		116	116	104	93		81	69
	72	140	10.1	102	89		76	63	49		36	23	136		11.2	102		89	76	62	49		36	23
4500	67	133	9.9	128	117		104	90	77		64	51	128		11.0	124		116	102	89	76		62	49
	62	124	9.7	124	124		122	109	96		82	69	120		10.7	120		120	120	106	93		80	66
	57	122	9.7	122	122		122	109	95		82	69	118		10.8	118		118	118	104	91		78	65
	72	142	10.1	110	95		80	65	51		36	21	138		11.2	110		96	81	66	51		36	21
5000	67	135	9.9	135	125		110	95	80		65	50	129		11.0	129		124	109	94	79		64	49
	62	126	9.7	126	126		126	111	96		81	66	121		10.8	121		121	121	106	91		76	62
	57	124	9.7	124	124		124	109	94		79	64	119		10.8	119		119	119	104	90		75	60
			Temperature of Air on Condenser Coil 105°F											Temperature of Air on Condenser Coil 115°F
	72	121	12.3	75	66		58	49	41		32	24	116		13.6	73		64	56	47	38		30	21
3000	67	111	12.1	95	86		78	69	61		52	44	104		13.3	92		83	75	66	58		49	40
	62	104	11.7	104	101		93	84	76		67	58	97		12.9	97		94	85	77	68		60	51
	57	103	11.8	103	100		92	83	75		66	58	97		12.9	97		94	85	77	68		59	51
	72	125	12.4	83	73		63	53	43		33	23	119		13.7	81		71	61	51	41		31	21
3500	67	114	12.2	104	95		85	75	65		55	45	106		13.5	100		92	82	72	62		52	42
	62	107	11.8	107	106		101	91	81		71	61	100		13.0	100		98	94	84	74		64	53
	57	106	11.9	106	105		101	90	80		70	60	100		13.1	100		98	94	84	73		63	53
	72	128	12.5	92	80		69	57	45		34	22	122		13.9	90		78	67	55	43		32	20
4000	67	118	12.3	114	104		93	81	69		58	46	109		13.6	109		101	90	78	66		55	43
	62	110	11.9	110	110		110	99	87		75	64	103		13.2	103		103	103	91	79		68	56
	57	109	12.0	109	109		109	98	86		74	63	102		13.2	102		102	102	91	79		67	56
	72	130	12.5	100	87		74	61	47		34	21	124		13.9	99		85	72	59	46		32	19
4500	67	119	12.3	118	111		100	86	73		60	47	111		13.6	111		107	97	84	71		57	44
	62	112	12.0	112	112		112	99	85		72	59	104		13.2	104		104	104	91	78		65	51
	57	111	12.0	111	111		111	98	84		71	58	104		13.2	104		104	104	91	78		64	51
	72	132	12.5	109	94		79	64	49		34	20	127		13.9	107		93	78	63	48		33	18
5000	67	121	12.3	121	119		107	92	77		62	47	113		13.6	113		113	104	89	75		60	45
	62	114	12.0	114	114		114	99	84		69	54	106		13.2	106		106	106	91	77		62	47
	57	113	12.0	113	113		113	98	83		68	53	106		13.2	106		106	106	91	76		61	47
			Temperature of Air on Condenser Coil 125°F
	72	111	14.8	70	62		53	45	36		28	19	* These capacities are gross ratings. For net
3000	67	96	14.6	89	80		71	63	54		46	37
															capacity, deduct air blower motor, MBH = 3.415
	62	90	14.0	90	86		78	69	61		52	44
															x kW. Refer to the appropriate Blower Perfor-
	57	91	14.1	91	87		78	70	61		53	44
	72	113	15.0	79	69		59	49	39		29	19			mance Table for the kW of the supply air
3500	67	99	14.8	96	89		79	69	59		49	39			blower motor.
	62	93	14.2	93	91		86	76	66		56	46	†		These ratings include condenser fan motors
	57	93	14.3	93	91		87	77	67		57	46			and the compressor motors but not the supply
	72	116	15.2	88	76		65	53	41		30	18
															air blower motor.
4000	67	101	14.9	101	99		87	75	64		52	40
	62	95	14.4	95	95		95	83	71		60	48
	57	95	14.4	95	95		95	84	72		60	49
	72	118	15.2	97	84		70	57	44		31	17
4500	67	103	14.9	103	103		94	81	68		55	41
	62	97	14.4	97	97		97	84	70		57	44
	57	97	14.4	97	97		97	84	71		58	44
	72	121	15.2	106	91		76	61	46		31	16
5000	67	105	14.9	105	105		102	87	72		57	42
	62	99	14.4	99	99		99	84	69		54	39
	57	100	14.4	100	100		100	85	70		55	40

Unitary Products Group

11