Yongnuo YN85mm f1.8 User Manual

Please read this user manual carefully before use and under-
stand this manual for proper use.Keep this manual properly
for reference in the future.

1.Don't view the sun or bright light through the lens or the
camera.If not,the vision will be impaired.Viewing the sun
through the lens is particularly harmful.

2.Don't place the lens without a lens cover under the sun,no
matter whether the lens set on the camera or not.If not,the
lens may gather light and cause a fire.

1.Keep this product from striking and avoid placing this
product in an extremely hot, extremely cold or humid
environment.

2.For long-term storage,it's appropriate to store this product
in a dry cold and well-ventilated place.To protect blooming
layer of the lens,it's recommended to keep this product away
from inset pill or place pervades the smell the inset pill flings
off.

3.The dirt and fingerprint on the lens should be cleaned with
soft and moist lens cleaning cloth or lens cleaning tissue;
do not clean the lens with solvent,benzene or other organic
cleansers.

4.This product is not waterproof. Please be careful when you
use it in a raining day or nearby water and be sure not to
get it wet.lf the internal parts,the lens or the electronic com-
ponents are damaged for this product gets wet,it's quite
possibly that this product won't be repaired any longer.

5.Water vapor or water drop may condense on the surface of
the lens for temperature jump. Therefore,when the lens is
carried into a warm indoor environment from the cold out-
doors,it's best to put the lens into a sealed plastic bag till the
lens temperature is closed to room temperature.(Vice vetsa)

Align the red mounting sign on the lens to the red lens mounting
sign on the camera,and rotate the lens clockwise till it clicks.
To dismount the lens,rotate it anti-clockwise till it stalls.(For
more details about mounting/dismounting lens please refer to
the camera user manual.)

●After the lens is dismounted,please place the back of the lens
upwards to keep the surface of the lens and the electronic
contact from getting scratched.

●lf the electronic contact gets dirty,scratched or fingerprinted,

it may lead to corrosion or bad contact.Camera or lens may

not work normally.lf the electronic contact gets dirty or

fingerprinted,please wipe and clean it with soft cloth. fingerprinted,please wipe and clean it with soft cloth.

●When dismounting the lens,please fit on a dust mount the dust
cover.To mount the dust cover correctly,align the mounting
sign on the dust cover to the red mounting sign on the lens,
and rotate it clockwise.To dismount the dust cover,rotate it
anti-clockwise.

To shoot in autofocus (AF) mode, set the focus mode switch to
AF.To shoot in manual focus (MF) mode, set the focus mode
switch to MF, and focus by turning the focusing ring.
The focusing ring always works, regardless of the focus mode.
After autofocusing in ONE SHOT AF mode, focus manually
by pressing the shutter button halfway and turning the focusing
ring (Full-time manual focus) ring (Full-time manual focus)

The depth of field indicator on thelens indicates the general
depth of field.lf the camera supports depth of field preview(the
aperture reduces)function,the depth of field can be previewed
from the view finder.

Full-frameV
elw-angle
Coverage

Lens Structure

Minimum Aperture

Minimum Focusing Distance

Maximum Magnification and
Sight Range

Filter Diameter/Quantity
AvailableAvailable

Maximum Diameter&Length

Weight

■Lens length refer to distance from fitting surface to the front
end of the lens.

■Unless otherwise stated,the size and weight are suitable for
lens only.

■Aperture setting can be assigned by the camera.

Diagonal

Vertical

Horizontal

28.5°

16.0°

24.0°

6 sets，9 pleces

f/18

0.85m

0.13x/184*274mm0.13x/184*274mm

58mm/*1

81.0*79.5mm

about 460g

①Focusing ring ②Focus distance indicator
③Focus distance index ④Lens mounting index
⑤Electronic contact ⑥Focus mode switch

Accessories:Lens case and Lens Hood YN-ET-65

The lens hood can keep unwanted light out of the lens,and also
protects the lens from rain,snow and dust.
Press the buttons on both sides of the hood to attach.

Shenzhen Yongnuo Photographic Equipment Co.,Ltd
Address 2-B509 Saige Science&Technology Park,North
Huaqian Rd,Futian District,Shenzhen,China
TEL :[phone]
FAX:[phone]
Email:[e-mail]
Website:www.hkyongnuo.comWebsite:www.hkyongnuo.com