Yongnuo YN560-TX PRO User Manual
YN560-TX PRO
闪光灯信号发射器
Speedlite Transmitter
User Manual
For N
用户手册
Contents
Introduction....................1
Nomenclature..................2-3
Preparation Before Use..............4-5
Wireless Setting..................6
Wireless Flash Shooting..............7-8
C.Fn: Setting Custom Functions..........9-10
Reference ...................11-12
Troubleshooting Guide...............13
Specifications..................14
Read this instruction manual while also referring to the
instruction manuals of your camera and Speedlite.
Before using the transmitter, read this instruction
manual and the instruction manuals of your camera and
Speedlite to familiarize yourself with the operations.
Introduction
YONGNUO YN560-TX PRO(For N) speedlite transmitter is
a upgrade version based on YN560TX II, with TTL/ high
speed sync functions, its radio protocol achieves cross-
brand compatibility
YN560-TX PRO (For N) can control, trigger YN200/YN862
series and the models which have been upgraded to the
latest firmware such as YN968N(II)/YN968C(in 560 slave
mode) to realize i-TTL/M flash, high speed sync, focal length
control functions
Compatible with radio flash and flash trigger models such
as YN560III/IV/YN660/YN720/YN860Li/RF603 series /RF605
series directly, realize manual flash functions
16 channels, up to 10,000 customizable photographer ID,
A/B/C/D/E/F 6 flash groups
Supports front-curtain sync, rear-curtain sync, auto fp
high speed sync
2.4G radio maximum communication distance is over
100m
Supports remote control focal settings of slave unit flash
(only for YONGNUO compatible flashes)
Firmware can be upgraded via USB(Micro-USB)
High resolution dot-matrix LCD, backlight for keys
Fast lock mechanism
Built-in AF assist beam emitter
1
Nomenclature
※The protective flim
can be torn out.
Function button 2
Function button 1
AF-assist beam
emitter button
Flash mode button
:Test flash
button
Select/Set button
Select dial
Mounting foot
lock lever
Lock-release
button
Dust- and water-
resistant adapter
Radio transmission
status lamp
LCD panel
Fun ction b utton3
Fun ction b utton 4
Bat tery compa rtment
cov er
ON：Power on
LOCK： Button/dial lock
(Power on)
OFF： Power off
Terminal cover
AF assist lamp
Locking pin
Mounting foot
Contacts
2
USB upgrade
terminal
(Micro USB)/Remote
release terminal
Nomenclature
LCD Display
Gr : Group flash
Flash mode
Firing group
Flash exposure
or flash output
The display will show only the settings currently
A.TTL C. MB. TTL
0. 0
GR/ PRE
applied.
The functions displayed above function buttons 1 to
4, change according to the setting’s status.
When a button or dial is operated, the LCD panel
illuminates.
Meaning of Radio transmission status lamp
Lamp statues
Green light
Red light
ZOOM(Slave unit)
A.50 MM
0. 0
ZOOM
Custom functions enable
D. OFF
CH/ I D
Meaning
Radio transmissing
Flash Trigging
3
Batter y
Channel
AF lamp enable
Loading...