Yetter Bar Kit Manual User Manual

Loading...

FERTILIZER COULTER

MOUNTING BARS AND

EXTENSION KITS

SET-UP & PARTS MANUAL

YETTER MANUFACTURING CO.

FOUNDED 1930

Colchester, IL 62326-0358 Toll free: 800/447-5777

309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com

FOREWORD

You’ve just joined an exclusive but rapidly growing club.

For our part, we want to welcome you to the group and thank you for buying a Yetter product.

We hope your new Yetter products will help you achieve both goals-increase your productivity and increase your efficiency so that you may generate more profit.

This operator’s manual has been designed into four major sections: Foreword, Safety Precautions, Installation Instructions and Parts Breakdown.

This SAFETY ALERT SYMBOL indicates important safety messages in the manual. When you see this symbol, be alert to the possibility of

PERSONAL INJURY and carefully read the message that follows.

The word NOTE is used to convey information that is out of context with the manual text. It contains special information such as specifications, techniques and reference information of a supplementary nature.

The word IMPORTANT is used in the text when immediate damage will occur to the machine due

to improper technique or operation. Important will apply to the same information as specified by note only of an immediate and urgent nature.

It is the responsibility of the user to read the operator’s manual and comply with the safe and correct operating procedure and to lubricate and maintain the product according to the maintenance schedule in the operator’s manual.

The user is responsible for inspecting his machine and for having parts repaired or replaced when continued use of the product would cause damage or excessive wear to the other parts.

It is the user’s responsibility to deliver his machine to the Yetter dealer who sold him the product for service or replacement of defective parts, which are covered by the warranty policy.

If you are unable to understand or follow the instructions provided in this publication, consult your local Yetter dealer or contact:

YETTER MANUFACTURING CO.

309/776-4111 800/447-5777 309/776-3222 (FAX) Website: www.yetterco.com E-mail: info@yetterco.com

WARRANTY

Yetter Manufacturing warrants all products manufactured and sold by it against defects in material. This warranty being expressly limited to replacement at the factory of such parts or products as shall appear to be defective after inspection. This warranty does not obligate the Company to bear cost of labor in replacement of parts. It is the policy of the Company to make improvements without incurring obligations to add them to any unit already sold. No warranty is made or authorized to be made, other than herein set forth. This warranty is in effect for one year after purchase.

DEALER: ________________________________________

Yetter Manufacturing warrants its own products only and cannot be responsible for damages to equipment on which mounted.

2

SAFETY

A brief description of signal words that may be used in this manual:

CAUTION: Used as a general reminder of good safety practices or to direct attention to unsafe practices.

WARNING: Denotes a specific potential hazard.

DANGER: Denotes the most serious specific potential hazard.

SAFETY PRECAUTIONS

You can make your farm a safer place to live and work if you observe the safety precautions given. Study these precautions carefully and insist that those working with you and for you follow them.

Finally, remember this: an accident is usually caused by someone’s carelessness, neglect or oversight.

WARNING

Never clean, lubricate or adjust a machine that is in motion. Always lower or block the implement before performing service.

If the machine must be serviced in the raised position, jack or block it up to prevent it from accidentally falling and injuring someone.

Do not allow riders on the tractor or implement.

Use speeds and caution dictated by the terrain being traversed. Do not operate on any slope steep enough to cause tipping or loss of control.

Be sure all personnel are clear of the immediate area before operating.

Read and understand the operator’s manual and require all other persons who will operate the equipment to do the same.

Be familiar with all tractor and implement controls and be prepared to stop engine and implements quickly in an emergency.

CAUTION

Consult your implement and tractor operator’s manual for correct and safe operating practices.

Beware of towed implement width and allow safe clearance.

FAILURE TO HEED MAY RESULT IN PERSONAL INJURY OR DEATH.

3

TABLE OF CONTENTS

SECTION 1, PARTS IDENTIFICATIONS

JOHN DEERE PLANTERS

PAGE

JOHN DEERE 7000 DRAWN PLANTERS

2970-135 Front Bar Kit, 4R & 6RN………………………………………………………..6 2970-136 Front Bar Kit, 6RW & 8RN……………………………………………………..6 6005-104 Front Bar Reinforcing Brkt. Assembly (7x7 Bar)…………………………….7

6005-105 Front Bar Reinforcing Brkt. Assembly (5x7 Bar)…………………………….7

2975-188 6” Set Back Kit…………………………………………………………………..8

JOHN DEERE 7100/7300 3PT. MOUNTED PLANTER

2990-142 Front Bar Mounting Kit, 4R……………………………………………………10

2990-143 Front Bar Mounting Kit, 6R……………………………………………………10 2990-140 Front Bar Mounting Kit, 8R-W…………………………………………….. …10 2990-141 Front Bar Mounting Kit, 8R & 12R-N…………………………………………10 2975-132 Hitch Offset Kit, 7” JD 7100 Only……………………………………………..11 2975-137 JD 7300 Flex Hitch Offset Kit………………………………………………….12 2975-138 JD 7300 Rigid Hitch Offset Kit…………………………………………………13

JOHN DEERE 7200 DRAWN PLANTER

2975-130 4R-N/W & 6R-N 3 x 3 Extension Kit…………………………………………..14 2975-131 6R-W & 8R-N 3 x 3 Extension Kit……………………………………………..14 2975-129 3 x 3 Front Bar Reinforcing Brkt. Kit…………………………………………..15 2975-189 6” Setback Kit……………………………………………………………………15

JOHN DEERE 7200 FLEX FOLD PLANTER

2990-167 Front Fold Kit, JD 7200 12R-N Flex Fold (Dry Fertilizer)……………………16

2990-177 Front Fold Kit, JD 7200 8R Flex Fold (Dry Fertilizer)…………………….….16

2975-172 Mounting Kit, JD 7200 12R-N Flex Fold (Liquid Fertilizer)………………… 18 2975-128 Mounting Kit, JD 7200 16R Flex Fold (Liquid Fertilizer)…………………….19

2995-128 Mounting Kit, JD 7200 24R-N Flex Fold (Liquid Fertilizer)………………….20

CASE/IH PLANTERS

TRAILING CASE/IH 800 & 900 CYCLO PLANTER

2970-044 Extension Bar Kit, 4R-W Case/IH 800 & 900 (Dry Fertilizer)………………21

2970-063 Extension Bar Kit, 6R-N Case/IH 800 & 900 (Dry Fertilizer)……………….21

2970-179 Front Bar Mounting Kit, 4R/6R Case/IH 800 & 900…………………………22

SEMI-MOUNTED CASE/IH 800 & 900 CYLCO PLANTER

2990-131 Front Bar Mounting Kit, 8R-W, 8R-N & 12R-N Case/IH 800

& 900 Semi-Mounted……………………………………………………………………….23

4

PAGE

KINZE OR NEW IDEA PULL TYPE PLANTERS

2975-142 Bar Remount Kit, Kinze Series II Sngl. Frame (Dry Fertilizer)…………….24

2995-056 Pusher Mounting Kit…………………………………………………………...25

2990-151 Front Bar Mounting Kit, 100” Bars……………………………………………26

WHITE PLANTERS

2990-148 Front Bar Mounting Kit, Pull Type, 4R-N/W & 6R-N

(For Pull Type Planters Without Fertilizer Bar)…………………………………………..26

WHITE 5100 SERIES DRAWN PLANTER

2970-162 10” Extension Bracket

(To Move 3 x 3 Diamond Bar 10” Forward)………………………………………………27

2970-163 Extension Bracket Assembly (Dry Fertilizer Bar)…………………………….28

SECTION II, COULTER / BRACKET LAYOUT

JOHN DEERE 7000 DRAWN PLANTER

2970-136 Front Bar Kit, 6R & 8R………………………………………………………….29

JOHN DEERE 7200 FLEX FOLD PLANTER

2990-167 Front Fold Kit, JD 7200 12R-N Flex Fold (Dry Fertilizer)…………………..30 2990-177 Front Fold Kit, JD 7200 8R Flex Fold (Dry Fertilizer)……………………….31

2975-172 Mounting Kit, JD 7200 12R-N Flex Fold (Liquid Fertilizer)…………………32

2975-128 Mounting Kit, JD 7200 16R Flex Fold (Liquid Fertilizer)………………..33-34 2995-128 Mounting Kit, JD 7200 24R-N Flex Fold (Liquid Fertilizer)…………………35

5

2970-135 FRONT BAR KIT, 4R, 6R AND

2970-136 FRONT BAR KIT, 6RW & 8RN

FOR JD 7000 DRAWN PLANTER, DRY FERTILIZER

6

FRONT BAR BRACKET ASSEMBLY

6005-104 FRONT BAR REINFORCING BRACKET ASSEMBLY (7 X 7 BAR) 6005-105 BAR REINFORCING BRACKET ASSEMBLY (5 X 7)

FOR JD DRAWN PLANTER

7

2975-188 6” SETBACK KIT, 7000 & KINZE

8

FRONT BAR MOUNTING INSTRUCTIONS

Yetter Front Bar Mounting Kits are designed to provide 2-1/2” square bar in front of the planter 7 x 7 bar. These attachments will not mount correctly on tractors with rear tires larger than recommended by tractor manufacturers. Three-point hitches must comply with ASAE standards.

3PT. HITCH PLANTERS

Narrow Row (30” to 36” rows)

1.Category III Quick Coupler required on the tractor to allow bar installation. See opposite page.

2.Install brackets and bars as shown. The short 2-1/2” square tube mounts in the center.

3.The 67” long 2-1/2” square tubes need to be cut off to the proper length for each particular planter. Set up as shown to determine where bars should be cut off. Provide at least 6” between bars in hinge area to allow wing flex.

Wide Row (38” and 40” rows)

1.Category II or III N Quick Coupler is required on the tractor to allow bar installation.

2.No center bar is provided, or needed, for wide row application.

3.See item 3 above.

Raise planter slowly the first time and check for tire clearance. The coulter must be mounted away from tire location to clear. Do not transport planter with less than 1” clearance between 2-1/2” square bar and tractor tires.

NOTE: In some cases a hitch extension may be required for clearance between 2-1/2” bar and tractor tires.

9

4, 6, 8 AND 12 ROW FRONT BAR KITS FOR JD 7100/7300 3 PT. MOUNTED PLANTER

10

2975-132 HITCH OFFSET KIT, 7”, JD 7100

11

+ 25 hidden pages