Yazoo/Kees 968999701-ZEKH52240 User Manual

0 (0)

Operator’s manual

968999694/ZEKH42200

968999698/ZEKH48240

968999701/ZEKH52240

OPERATOR’S MANUAL

ZE RIDER

Contents
Contents...................................................................	1
Introduction .............................................................	3
Congratulations....................................................	3
General ................................................................	3
Driving and Transport on Public Roads ...............	3
Towing .................................................................	3
Operating .............................................................	3
Good Service .......................................................	4
Manufacturing Number ........................................	4
Symbols and Decals ...............................................	5
Safety Instructions..................................................	7
General Use.........................................................	7
Personal Safety Equipment .................................	9
Driving on Slopes.................................................	9
Children..............................................................	10
Maintenance ......................................................	11
Transport............................................................	14
Customer responsibilities...................................	15
Controls .................................................................	16
Control Locations ...............................................	16
1. Parking Brake ................................................	17
2. Motion Control Levers....................................	17
3. Fuel Shut Off Valve........................................	18
4. Seat adjustment knobs ..................................	18
5. Refueling........................................................	19
6. Bypass linkage...............................................	20
7. Fuses .............................................................	20
8. Hour Meter .....................................................	21
9. Choke Control ................................................	21
10. Ignition Switch..............................................	21
11. Throttle Control ............................................	22
12. Blade switch.................................................	22
13. Cutting height pedal .....................................	23
Accessories........................................................	23
Operation ...............................................................	24
Training ..............................................................	24
Before Starting ...................................................	25
Starting the Engine ............................................	24
To start an engine with a weak battery ..............	29
Running..............................................................	30
Operating on hills ...............................................	31
Mowing Tips.......................................................	32
Stopping the Engine...........................................	33
Moving by Hand .................................................	34

Maintenance .........................................................	35
Maintenance Schedule......................................	35
Battery...............................................................	37
Ignition System..................................................	38
Checking the Safety System .............................	39
Checking the Engine's Cooling Air Intake .........	40
Checking and Adjusting the Throttle Cable.......	40
Checking and Adjusting the Choke Cable.........	40
Replacing the Air Filter......................................	41
Replacing the Fuel Filter ...................................	42
Checking the Fuel Pump’s Air Filter..................	42
Checking Tire Pressures...................................	42
Checking the Parking Brake..............................	43
Checking the V-belts .........................................	43
Deck belt ...........................................................	44
IZT belt ..............................................................	45
Checking the Blades .........................................	46
Adjusting the Mower Deck ................................	48
Cleaning and Washing ......................................	50
Caster Wheels...................................................	50
Hardware...........................................................	50
Parking brake ....................................................	51
Tracking adjustment..........................................	51
Lubrication............................................................	52
Lubrication Schedule.........................................	52
General .............................................................	52
Lubricating the Cables ......................................	53
Lubricating in Accordance with the Lubrication
Schedule ...........................................................	53
Trouble Shooting Guide ......................................	59
Storage ..................................................................	62
Winter Storage ..................................................	62
Service ..............................................................	62
Wiring diagram .....................................................	63
Technical Data ......................................................	64
Accessories.......................................................	68
Torque Specifications........................................	68
Conformity Certificates........................................	69
USA requirements.............................................	69
Service Journal ....................................................	70
Delivery Service ................................................	70
After the First 5-8 Hours....................................	71
25-Hour Service ................................................	72
50-Hour Service ................................................	73
100-Hour Service ..............................................	74
300-Hour Service ..............................................	75
At Least Once Each Year..................................	76

English-1

WARNING!

Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance.

WARNING!

Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

WARNING!

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

English-2

INTRODUCTION

Introduction

Congratulations

Thank you for purchasing a Yazoo-Kees ride-on mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a hydrostatic transmission regulated by steering controls also contribute to the machine’s performance.

This manual is a valuable document, read the manual carefully before using or servicing the machine. Following the instructions (use, service, maintenance, etc.) by all who operate this machine can considerably increase the lifespan of your machine and even increase its resale value. Please contact your dealer for more information. It is also very important to follow the instructions for the safety of you and others.

If you sell your machine, be sure to give the operator’s manual to the new owner.

The final chapter of this operator’s manual comprises a Service Journal. Ensure that service and repair work is documented. A well kept service journal reduces service costs for the season-based maintenance and affects the machine’s resale value. Take the operator’s manual along when the machine is left at the workshop for service.

General

In this operator’s manual, left and right, backward and forward are used in relation to the machine’s normal driving direction.

Continuous dedication to improve our products require that specifications and design are subject to change without notice.

Driving and Transport on Public

Roads

Check applicable road traffic regulations before transporting on public roads. If the machine is transported, you must always use approved fastening equipment and ensure that the machine is well anchored. DO NOT operate this machine on public roadways.

Towing

Do not tow this machine, it may cause damage to the drive system.

Do not tow any trailers, etc with this mower. They may jackknife or overturn causing damage to the mower and possibly serious injury to the operator.

Operating

This machine is constructed only for mowing grass on lawns and other free and even ground without obstacles such as stones, tree stubs, etc. The machine can also be used for other tasks when equipped with special accessories provided by the manufacturer, for which the operating instructions are provided in conjunction with delivery. All other types of use are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

Lawnmowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good judgement, careful use in accordance with these instructions and common sense.

The machine must only be operated, maintained, and repaired by persons that are familiar with the machine’s special characteristics and who are well versed in the safety instructions. Use only approved repair parts to maintain this machine.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

English-3

INTRODUCTION

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

Good Service

Yazoo-Kees products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual.

When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional:


This Operator’s Manual belongs to the	Engine	Transmission
machine with manufacturing number:

Manufacturing Number

The machine’s manufacturing number can be found on the printed plate affixed to the left in the engine compartment. Stated on the plate, from the top are:

•The machine’s type designation (I.D.).

•The manufacturer's type number (Model).

•The machine’s serial number (Serial no.)

Please state the type designation and serial number when ordering spare parts.

The engine’s manufacturing number is stated on a barcode decal. This is placed on the left side of the crankcase, in front of the starter. The plate states:

•The engine’s serial number (E/NO).

•The engine’s type designation (Code). Please state these when ordering spare parts.

The Hydro Drive iZ gears have a barcode decal affixed to the rear of the gears.

English-4

SYMBOLS AND DECALS

Symbols and Decals

These symbols are found on the machine and in the operator’s manual.

Study them carefully so that you know what they mean.

WARNING!

Xxxxxxx xxxx xxxxxxxx xxx x

Xxxxx xxxxxx xx.

xx xxxxxxxx xxxxx xxx xx.

Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader does not follow instructions given in the manual.

IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx

xxxx xxxxxx xx.

Used in this publication to notify the reader of a risk of material damage, particularly if the reader does not follow instructions given in the manual. Used also when there is a potential for misuse or misassembly.





Reverse	Neutral	Fast	Slow	Choke

Fuel

Warning! Parking brake		CE conformity
		marking. Only for
		European market

Warning! Rotating	Do not touch rotating
blades, keep away from	parts
the discharge deck

Battery acid is corrosive, explosive,		Do not stand here Noise emissions to the surroundings
and flammable		in accordance with the European
		Union’s directive. The machine’s
		emission is stated in the chapter
		TECHNICAL DATA and on the decals.
		Only machines for European
Use protective glasses	Use protective gloves	market
Use protective glasses	Use protective gloves

English-5

SYMBOLS AND DECALS

Read	Shut off engine
Operator´s	& remove key
Manual.	before
	performing any
	maintenance or
	repair work.

Whole	Severing
body	of fingers
exposure	& toes.
to thrown
objects.

Moving sharp blades under cover

Keep a safe distance from the machine.

Do not open or remove safety shields while engine is running.

Use on

slopes no

passengers

greater

than 10°.

Careful	Careful going
backing up,	forward,
watch for	watch for
other people.	other people.

English-6

SAFETY INSTRUCTIONS

Safety Instructions

These instructions are for your safety. Read them carefully.

WARNING!

This symbol means that important safety instructions need to be emphasized. It concerns your safety.

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

General Operation

•Read, understand, and follow all instructions on the machine and in the manual before starting.

•Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

•Only allow responsible adults, who are familiar with the instructions, to operate the machine.

•Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

•Be sure the area is clear of bystanders and pets before operating. Stop machine if anyone enters the area.

•Never carry passengers. The machine is only intended for use by one person.

•Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

•Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

•Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working

•Slow down before turning.

•Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

8011-512

Read the operator’s manual before starting the machine

8011-513

Clear the area of objects before mowing

8011-520

Never take passengers

English-7

SAFETY INSTRUCTIONS

•Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

•Operate machine only in daylight or good artificial light.

•Do not operate the machine while under the influence of alcohol or drugs.

•Watch for traffic when operating near or crossing roadways.

•Use extra care when loading or unloading the machine into a trailer or truck.

•Always wear eye protection when operating machine.

•Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

•Follow the manufacturer’s recommendation for wheel weights or counterweights.

•Anyone who operates this machine must first read and understand this Operation Manual. Local laws may regulate the age of the user.

•Keep machine free of grass, leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

English-8

SAFETY INSTRUCTIONS

Personal Safety Equipment

WARNING!

When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment.

•Make sure that you have first aid equipment close at hand when using the machine.

• Never use the machine when barefoot. Always wear protective shoes or boots, preferably with steel toecaps.

•Always wear approved protective glasses

or a full visor when assembling or driving.

•Always wear gloves when handling the

blades.

•	Never wear loose clothing that can get caught
	in moving parts.
•	Use ear protectors to avoid damage to
	hearing.	8011-670
		8011-670
		Personal protective equipment

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

•Mow up and down slopes (10 degrees maximum), not across.

•Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

•Choose a low ground speed so that you will not have to stop while on the slope.

•Do not mow on wet grass. Tires may lose traction.

•Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

•Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

6003-004

Mow up and down, not side-to-side

WARNING!

Do not drive up or down hills with slopes greater than 10 degrees. And do not drive across any slopes.

English-9

SAFETY INSTRUCTIONS

•Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do not use on steep slopes.

•Do not try to stabilize the machine by putting your foot on the ground.

•Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

•Do not make any sudden changes in speed or direction.

•Take extra care if any attachments are fitted that can change the stability of the machine.

Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

•Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator.

•Be alert and turn machine off if a child enters the area.

•Before and while backing, look behind and down for children.

•Never carry children, even with the blades shut off. They may fall off and be seriously injured or interfere with safe machine operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

•Never allow children to operate the machine.

•Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child.

8011-519

Be extra cautious when driving on slopes

8011-517

Never allow children to operate the machine

8011-518

Keep children away from the work area

English-10

SAFETY INSTRUCTIONS

Maintenance

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool at least two (2) minutes before refueling.

•Never fuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliances.

•Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling.

•Before you begin refueling, minimize the risk of static electricity by touching a metal surface.

•Remove gas-powered equipment from the truck or tailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

•Do not start the engine near spilled fuel.

•Never use gasoline as a cleaning agent.

•If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

8011-516

Never fill the fuel tank indoors

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling

English-11

SAFETY INSTRUCTIONS

•Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

General Maintenance

•Never operate machine in a closed area.

•Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

•Never tamper with safety devices. Check their proper operation regularly.

•Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing.

•If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting.

•Never make any adjustments or repairs with the engine running. Prevent starting by removing the spark plug before making any adjustments or carrying out any maintenance

•Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary.

•Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

•Check brake operation frequently. Adjust and service as required.

•Maintain or replace safety and instruction labels, as necessary.

•Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices.

•Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components.

•Be very careful when handling battery acid. Acid on skin can cause serious corrosive burns. If you spill battery acid on your skin, rinse immediately with water.

8011-515

Never drive the machine in an enclosed space

Always use protective glasses when handling the battery.

WARNING!

The battery contains lead and lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Wash your hands after handling the battery.

English-12

SAFETY INSTRUCTIONS

•Acid in the eyes can cause blindness, contact a doctor immediately.

•Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/damage.

•Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition.

•Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components.

•Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery.

WARNING!

Avoid electrical sparking and its consequences by the following routines:

•Use protective goggles.

•Ensure that the fuel filler cap is mounted tightly and no flammable substances is stored in an open vessel.

•Never work with the starter circuit if there is spilled fuel.

•Disconnect the chassis cable from the battery first and reconnect it last.

•Do not make a bridge short circuit across the starter relay to run the starter.

•Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas.

•Stop and inspect the equipment if you

6003-009

Do not smoke when performing maintenance on the battery. The battery can explode and cause serious injury/damage

8009-728

Risk of sparking

English-13

SAFETY INSTRUCTIONS

run over or into anything. If necessary, make repairs before starting.

•Never make adjustments with the engine running.

•The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. Only use approved repair parts for the machine.

•The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them.

•Check the parking brake’s functionality regularly. Adjust and service as necessary.

•The mulch blades should only be used in familiar areas when higher quality mowing is desired.

•Reduce the risk of fire after using the machine by removing grass, leaves, and other debris that may have accumulated on the machine. Allow the machine to cool before putting it in storage.

•Clean deck and underside of deck after each use, and avoid spraying engine and electrical components with water.

Transport

•The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer.

•Use an approved trailer to transport the machine. Activate the parking brake, turn off the fuel supply, and fasten the machine with approved fastening devices, such as bands, chains, or straps, when transporting.

•Do not operate this machine on public roadways.

•Check and abide by local traffic regulations before transporting the machine on any road.

•Do not tow this machine, it may cause damage to the drive system.

•Do not tow any trailers, etc. with this mower. They may jackknife or overturn causing damage to the mower and possibly serious injury to the operator.

8011-644

Clean the machine regularly

IMPORTANT INFORMATION

The parking brake is not sufficient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Always reverse the machine onto the transport vehicle to avoid tipping it over.

English-14

SAFETY INSTRUCTIONS

•Load into truck or trailer by driving up ramps in low gear. Do not lift! This machine is not intended to be lifted by hand.

Customer responsibilities

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your mower.

•Follow the instructions under "Maintenance” and "Storage” sections of this owner’s manual.

•This machine has no brain. Use yours!

WARNING!

This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, bush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

A spark arrester for the muffler is available through your authorized Yazoo/Kees dealer.

English-15

CONTROLS

Controls

This operator’s manual describes the Yazoo/ Kees Zero Turn Rider. The rider is fitted with a Kohler engine.

Transmission from the engine is made via two belt-driven hydraulic transaxles, one for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed.

Control Locations

Zero Turn Rider

8011-769-2

Locations of the controls
		Page			Page
1.	Motion control levers	17	8.	Hour meter	20
2.	Parking brake	18	9.	Choke control	21
3.	Fuel shut off valve	18	10.	Ignition switch	21
4.	Seat adjustment bolts	18	11.	Throttle control	21
5.	Fuel tank cap	18	12.	Blade switch	22
6.	Bypass linkage	19	13.	Cutting height pedal	22
7.	Fuses	20

English-16

CONTROLS

1. Motion Control Levers

The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward.

When both controls are in the neutral position (N), the machine stands still.

By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively.

In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right.

Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. The rotation direction when zero turning is determined by which steering control is moved backward behind the neutral position. If the left steering control is pulled backward, the machine turns to the left. Use extra care when using this maneuver.

If the steering controls are in uneven positions when standing still or do not fit in the slots for moving the controls outward, they can be adjusted.

8011-789

Steering controls

WARNING!

The machine can turn very rapidly if one steering control is moved much further forward than the other.

1
2	3
4

1. Forward	8011-791

2.Neutral

3.Neutral slot, Neutral lock

4.Reverse

Fuel shut off valve in OFF position

English-17

CONTROLS

2. Parking Brake

IMPORTANT INFORMATION

The machine must be stopped before activating the parking brake.

The parking brake is found on the left of the machine. Pull the lever backward to activate the brake and forward to release it.

Tracking

If the mower is not tracking straight, check the air pressure in both rear tires. Recommended air pressure is 15 psi. (1 bar) Tracking must be checked on a flat and level concrete or blacktop surface. If the unit still does not track straight contact your Yazoo/ Kees workshop for adjustments.

3. Fuel Shut Off Valve

The fuel shut off valve is located under the fuel tank. The valve has two positions; ON and OFF.

4. Seat adjustment bolts

With the machine off remove the two bolts holding the seat pan down and flip the seat forward.

The seat can be adjusted lengthways. When making adjustments, loosen the four bolts under the seat pan, after which the seat can be moved backward or forward.

Once the seat is adjusted to your liking. Flip the seat back down and rebolt the seat pan to the frame.

8011-711

Parking brake not activated

8011-712

Fuel shut off valve in OFF position

CZ-1

Lengthways adjustment

English-18

CONTROLS

5. Refueling

Read the Safety Instructions before refueling. The machine has one fuel tank, just behind the seat. The tank volume is 5.4 gallons (20.4 liters).

The engine will run on a minimum of 85octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used beneficially. See also Technical Data concerning ethanol fuel. Methanol fuel is not allowed.

WARNING!

Gasoline is highly flammable. Observe caution and fill the tank outdoors

(see the safety instructions).

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes.

WARNING!

Fill to bottom of filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

When operating in temperatures below 32° F. (0° C.), use fresh, clean winter grade gasoline to help insure good cold weather starting.

Make sure the fuel cap is properly tightened and the gasket is not damaged.

8011-761

Fuel tank

IMPORTANT INFORMATION

Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel tank or permanent damage may occur.

English-19

CONTROLS

6. By pass linkage

When pushing or pulling the mower, be sure to engage the IZT (Integraded Zeroturn Transaxle) bypass linkages. The IZT bypass linkages are located on the rear of the frame, below the rear engine guard.

•Raise the deck into the highest cutting position.

•Pull the IZT bypass linkages out and into the slots and release so that it is held in the bypass position.

•To re-engage the IZT’s to drive, reverse the above procedure.

7. Fuses

The fuses are located in a holder at the right hand side of the battery compartment. They are flat pin fuses of the same type used in automobiles.

There are two fuses.

Fuse ratings and functions:

•20 A, Primary fuse.

•7.5 A, Mower deck coupling.

CZ10-2

1. IZT Bypass linkage

Bypass linkages

CZ12

1.Head outside of rear deck

2.IZT Bypass linkage in bypass position

Bypass position

8011-483

Fuses

English-20

CONTROLS

8. Hour Meter

The hour meter displays the total operating time.

It will flash CHG OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter can not be manually reset.

8011-759

Hour meter

9. Choke Control

The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.

For cold starts the control should be pulled out.

8011-756

Choke control

10. Ignition Switch

The ignition key is placed on the control panel and is used to start and stop the engine.

IMPORTANT INFORMATION

Do not run the starter for more than five seconds each time. If the engine does not start, wait about 10 seconds before retrying.

8011-758

Ignition key

English-21

CONTROLS

11. Throttle Control
The throttle control regulates the engine
speed and thereby the rate of rotation of the
blades, assuming the blade switch is pulled
out, see Engaging the Mower Deck.
In order to increase or decrease the engine
speed, the control is moved forward or
backward respectively.
Avoid idling the engine for long periods, as
there is a risk of fouling the spark plugs.
USE FULL THROTTLE WHEN MOWING, for
best mower performance and battery
charging.	8011-757
	8011-757
	Throttle control

12. Blade switch

In order to engage the mower deck, pull the knob out; the mower blades are disengaged when the knob is depressed.

8011-760

Blade Switch

English-22

+ 56 hidden pages