Loading...
YASKAWA AC Drive A1000 Option
120 Vac Digital Input
Installation Manual
Type: DI-101
To properly use the product, read this manual thoroughly and retain for easy reference, inspection, and maintenance. Ensure the end user receives this manual.
E(G) HC |
H1 |
H2 DM+DMIG R+ R- |
S+ S- |
V+ AC |
V- A1 A2 A3 FM AM AC MP RP AC |
S1 S2 |
S3 S4 S5 S6 S7 S8 SN SC SP |
M3 M6 M4
M1 M2 M5
MA MB MC
S1 S2 S3 S4 S5 S6 S7 S8 SN
MANUAL NO. TOEP YEAOPT 07
Copyright © 2011 YASKAWA ELECTRIC CORPORATION
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of Yaskawa. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because Yaskawa is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Yaskawa assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
2 |
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual |
Table of Contents
1 PREFACE AND SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 OPTION COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 INSTALLATION PROCEDURE. . . . . . . . . . . . . . . . . . . . . . .10 6 TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 7 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual |
3 |
1 Preface and Safety
1 Preface and Safety
Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection and application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances should any Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without exception, all controls should be designed to detect faults dynamically and fail safely under all circumstances. All systems or equipment designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with appropriate warnings and instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa must be promptly provided to the end user. Yaskawa offers an express warranty only as to the quality of its products in conforming to standards and specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses, or claims arising from misapplication of its products.
Applicable Documentation
The following manuals are available for the option and drive:
Option
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yaskawa AC Drive -A1000 Option |
Read this manual first. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DI-101 120 Vac Interface |
The installation manual is packaged with the |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installation Manual |
DI-101 120 Vac Interface Option and contains |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manual No: TOEP YEAOPT 07 |
installation procedures and precautions. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yaskawa Drive
Yaskawa AC Drive
A1000-Series
Quick Start Guide
Yaskawa AC Drive
A1000-Series
Technical Manual
The drive manuals cover basic installation, wiring, operation procedures, functions, troubleshooting, and maintenance information. The manuals also include important information about parameter settings and drive tuning. Access these sites to obtain Yaskawa instruction manuals:
U.S.: http://www.yaskawa.com Europe: http://www.yaskawa.eu.com Japan: http://www.e-mechatronics.com
For questions, contact your local Yaskawa sales office or the nearest Yaskawa representative.
4 |
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual |
1 Preface and Safety
Terms
Note: Indicates supplemental information that is not related to safety messages.
Drive: Yaskawa AC Drive A1000-Series
Option: Yaskawa AC Drive A1000-Series Option Digital Input DI-101
Registered Trademarks
Trademarks are the property of their respective owners.
Supplemental Safety Information
Read and understand this manual before installing, operating, or servicing this option. Install the option according to this manual and local codes.
The following conventions indicate safety messages in this manual. Failure to heed these messages could cause fatal injury or damage products and related equipment and systems.
DANGER
Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates an equipment damage message.
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual |
5 |
1 Preface and Safety
■General Safety
General Precautions
•The diagrams in this book may include options and drives without covers or safety shields to illustrate details. Be sure to reinstall covers or shields before operating any devices. Use the option according to the instructions described in this manual.
•Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply to all products to which this manual is applicable.
•The products and specifications described in this manual or the content and presentation of the manual may be changed without notice to improve the product and/or the manual.
•When ordering new copies of the manual, contact a Yaskawa representative or the nearest Yaskawa sales office and provide the manual number shown on the front cover.
DANGER
Heed the safety messages in this manual.
Failure to comply will result in death or serious injury.
The operating company is responsible for any injuries or equipment damage resulting from failure to heed the warnings in this manual.
NOTICE
Do not modify the drive or option circuitry.
Failure to comply could result in damage to the drive or option and will void warranty.
Yaskawa is not responsible for any modification of the product made by the user. This product must not be modified.
Do not expose the drive or option to halogen group disinfectants.
Failure to comply may cause damage to the electrical components in the drive or option. Do not pack the drive in wooden materials that have been fumigated or sterilized.
Do not sterilize the entire package after the product is packed.
6 |
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual |
2 Product Overview
2 Product Overview
About this Product
The DI-101 option has eight optically isolated input terminals that can be used to connect external 120 Vac control circuitry to the A1000 drive. The DI-101 option mounts directly to the A1000 control board terminals (S1 to S8 and SN). This option makes it possible to control the A1000 digital inputs with 120 Vac.
This manual explains the handling, installation and specifications of this product.
Applicable Models
The option can be used with the drive models in Table 1.
|
Table 1 Applicable Models |
|
|
|
|
Drive Series |
|
Drive Model Number |
A1000 |
|
All models (excluding A1000 HHP models) |
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual |
7 |
3 Receiving
3 Receiving
Please perform the following tasks upon receiving the option:
•Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.
•Verify receipt of the correct model by checking the model number printed on the option packaging. (Refer to Figure 1 on page 9 for more information)
•Contact your supplier if you have received the wrong model or the option does not function properly.
DI-101 Option Package Contents
Description: |
PCB 120 V Interface Card |
Installation Manual |
||||||||
|
|
|
UTC000450,RB |
|||||||
|
|
|
|
|
||||||
|
S1 |
S2 |
S3 |
S4 |
S5 |
S6 |
S7 |
S8 |
SN |
MANUAL |
– |
|
|
|
|
|
|
|
|
|
|
Quantity: |
|
|
|
|
|
|
|
1 |
|
1 |
Tools Required for Installation
•A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the option.
•A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the
option terminal block.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
8 |
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual |
Loading...