RX-485RDS/385/385RDS
Natural Sound Stereo Receiver
Ampli-syntoniseur stéréo de la série “Natural Sound”
Natural Sound Stereoreceiver
Natural Sound Stereoreceiver
Ricevitore stereo a suono naturale
Receptor estéreo de Sonido Natural
Natural Sound Stereo Ontvanger
OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHÖRTEILE MEDFÖLJANDE TILLBEHÖR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES
●After unpacking, check that the following parts are contained.
●Après le déballage, vérifier que les pièces suivantes sont incluses.
●Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
●Kontrollera effer det apparaten packats upp att följande delar finns med.
●Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
●Desembale el aparato y verifique que los siguientes accesorios están en la caja.
●Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
● |
Indoor FM Antenna |
● |
Remote Control Transmitter |
|
|||
● |
Antenne FM intérieure |
● |
Emetteur de télécommande |
|
|||
● |
UKW-Innenantenne |
● |
Fernbedienungsgeber |
|
|||
● |
FM inomhusantenn |
● |
Fjärrkontrollsändare |
|
|||
● |
Antenna FM per interni |
● |
Telecomando |
|
|||
● |
Antena FM interior |
● |
Transmisor del control remoto |
|
|||
● |
FM Binnenantenne |
● |
Afstandbediening |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
RX-485 RDS |
|||
|
|
|
|
|
|
RX-385, RX-385 RDS |
|
● |
AM Loop Antenna |
● |
Batteries (size AA, R6, UM-3) |
● |
Antenne AM à boucle |
● |
Piles (taille AA, R6, UM-3) |
● |
MW-Rahmenantenne |
● |
Batterien (größ AA, R6, UM-3) |
● |
AM ramantenn |
● |
Batterier (storlek AA, R6, UM-3) |
● |
Antenna AM ad anello |
● |
Batterie (dimensioni AA, R6, UM-3) |
● |
Antena de cuadro de AM |
● |
Pilas (tamaño AA, R6, UM-3) |
● |
AM Lusantenne |
● |
Batterijen (maat AA, R6, UM-3) |
This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC.
Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE. Diese Geräte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG. Dette apparat overholder det gaeldende EF-direktiv vedrørende radiostøj.
Questo apparecchio è conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi.
Este producto está de acuerdo con los requisitos sobre interferencias de radio frecuencia fijados por el Consejo Directivo 87/308 CEE.
Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG.
2
Thank you for selecting this YAMAHA stereo receiver.
FEATURES
● |
RX-485 RDS |
|
|
● IF Count Direct PLL Synthesizer Tuning |
||
|
65W + 65W (8Ω ) RMS Output Power, |
System |
||||
|
0.04% THD, 20 – 20,000 Hz |
● Remote Control Capability |
||||
|
|
|
|
|||
|
RX-385 and RX-385 RDS |
|
|
|
|
|
|
40W + 40W (8Ω ) RMS Output Power, |
RX-485 RDS and RX-385 RDS only |
|
|||
|
0.04% THD, 20 – 20,000 Hz |
● Multi-Functions for RDS Broadcast |
|
|||
● High Dynamic Power, Low Impedance |
Reception |
|||||
|
|
|
||||
|
Drive Capability |
RX-485 RDS only |
|
|
||
|
|
|
|
● Pure Direct Switch to Reproduce the |
||
● Continuously Variable Loudness Control |
Purest Source Sound |
|||||
● 40-Station Random Preset Tuning |
|
|
|
|||
● Automatic Preset Tuning |
|
|
|
|||
● Preset Station Shifting Capability |
|
|
|
|||
English
CONTENTS
Supplied Accessories ...................................... |
2 |
Caution ............................................................ |
4 |
Connections .................................................... |
5 |
Operations ....................................................... |
9 |
Tuning Operations ......................................... |
12 |
Preset tuning ................................................. |
13 |
Receiving RDS Stations |
|
RX-485 RDS and RX-385 RDS only .......... |
16 |
Remote Control Transmitter .......................... |
21 |
Notes about the Remote Control |
|
Transmitter .................................................... |
22 |
Troubleshooting ............................................. |
23 |
Specifications ................................................ |
24 |
How to Use This Manual
This manual describes three YAMAHA receivers, RX-385, RX-385 RDS and RX-485 RDS. There are some differences between those three models. Especially, RX-385 RDS and RX-485 RDS contain the functions for receiving special data on RDS network stations.
RX-385, on the other hand, is a receiver with a usual FM/AM tuning function.
Several places in the manual refer to differences in features between the three models. Be sure to follow the procedure for the model you are using.
*RDS is a data transmitting service system in network which is employed by FM stations. RDS stations are increasing in many countries (especially in Europe).
3
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1.To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
2.Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water.
3.Never open the cabinet. If something drops into the set, contact your dealer.
4.Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves.
5.The openings on the cabinet assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the cabinet will rise rapidly and eventually damage the circuits. Therefore, avoid placing objects against these openings and do not install the unit where the flow of air through the ventilation openings could be impeded.
6.Always set the VOLUME control to “–∞ ” before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started.
7.Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
8.Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty.
9.When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet.
10.To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm.
11.Grounding or polarization – Precautions should be taken so that the grounding or polarization of an appliance is not defeated.
12.AC outlet
Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide.
13. Voltage Selector (General Model only)
The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.
Voltages are 110/120/220/240V AC, 50/60 Hz.
IMPORTANT
Please record the serial number of this unit in the space below.
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
FOR CANADIAN CUSTOMER
THIS DIGITAL APPARATUS DOES NOT EXCEED THE “CLASS B” LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS.
The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.
For U.K. customers
If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
The wire in the mains lead are coloured in accordance with the following code:
Blue: NEUTRAL
Brown: LIVE
The colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug. Proceed as follows: the wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.
FREQUENCY STEP switch (General Model only)
Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area.
Before setting this switch, disconnect the AC power plug of this unit from the AC outlet.
4
CONNECTIONS
ANTENNA CONNECTIONS
●Each antenna should be connected to the designated terminals correctly, referring to the following figure.
●Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may result in improvement.
Outdoor FM antenna |
Indoor FM |
|
antenna |
|
(included) |
Outdoor AM antenna
300-ohm feeder
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75-ohm |
75-ohm/300-ohm |
|
|||||||
coaxial cable |
antenna adapter |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AM loop |
|
|
|
|
antenna |
|
|
|
|
(included) |
FM |
75Ω |
|
|
|
ANT UNBAL |
|
|
|
|
GND |
|
|
|
|
AM |
|
|
|
|
ANT |
|
|
|
|
|
PHONO |
CD |
AUX |
TAPE |
|
|
|
|
PB |
English
Ground
Connecting the AM loop antenna
Orient so that the best reception is obtained.
*The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.
*The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.
GND terminal
For maximum safety and minimum interference, connect the GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.
Notes
●When connecting the indoor FM antenna, make sure that the grooved part of the
connector hole is facing downward.
● If you need an outdoor
FM antenna to improve
FM reception quality, either 300-ohm feeder or coaxial cable may be used. In locations troubled by electrical interference, coaxial cable is preferable.
5
Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other components to which connections are being made.
AUDIO CONNECTIONS
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit.
RX-485 RDS
Speakers A
Video cassette player etc. Tape deck 2
Right |
Left |
AUDIO OUT |
LINE OUT |
LINE IN |
(Europe model)
|
FM |
75Ω |
|
|
|
|
|
|
|
|
|
ANT UNBAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC OUTLETS |
|
GND |
|
|
|
|
|
|
REMOTE |
|
SPEAKERS |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
CONTR0L |
|
|
|
AM |
|
|
|
|
|
|
|
R |
L |
GND |
ANT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A |
|
A |
|
|
|
|
|
|
|
|
PHONO |
|
|
|
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
|
|
|
B |
|
B |
|
|
|
|
|
|
|
|
R |
|
100W MAX. TOTAL |
|
|
|
|
|
TAPE 1 |
TAPE 2 |
|
|||
|
|
PHONO |
CD |
AUX |
|
SWITCHED |
||||
|
|
TAPE |
REC |
TAPE |
REC |
|
|
|||
|
|
|
|
|
PB |
OUT |
PB |
OUT |
|
|
|
|
REMOTE CONTROL |
GND OUTPUT |
OUTPUT |
LINE OUT LINE IN |
To AC outlet
Right |
Left |
Turntable |
Compact disc player |
Tape deck 1 |
Speakers B |
* 
: Refer to “ABOUT THE ACCESSORY TERMINALS” on page 8.
6
RX-385, RX-385 RDS
Video cassette player etc.
AUDIO OUT
FM 75Ω
ANT UNBAL
GND
AM
ANT
L
GND
R
PHONO CD |
AUX |
TAPE 1 |
|
TAPE |
REC |
||
|
|
PB |
OUT |
GND OUTPUT |
OUTPUT |
LINE OUT |
LINE IN |
Turntable |
Compact disc player |
Tape deck |
|
English
Speakers A
Right |
Left |
(Europe model)
|
SPEAKERS |
R |
L |
A |
A |
B |
B |
AC OUTLETS |
100W MAX. TOTAL |
SWITCHED |
To AC outlet
Right |
Left |
Speakers B
* 
: Refer to “ABOUT THE ACCESSORY TERMINALS” on page 8.
7
CONNECTING SPEAKERS
Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut to be as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass.
Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit and/or speakers.
●One or two speaker systems can be connected to this unit. If you connect only one speaker system, connect it to either the SPEAKERS A or B terminals.
●Use speakers with the specified impedance shown on the rear of this unit.
How to Connect:
Red: positive (+)
Black: negative (–)
|
Press up the tab. |
|
|
||
|
Insert the bare wire. |
|
|
[Remove approx. 5mm |
|
insulation from |
||
|
||
|
speaker wires.] |
|
|
down the tab and |
|
|
the wire. |
ABOUT THE ACCESSORY TERMINALS
AC OUTLET(S)
(Europe model) ................................... |
2 SWITCHED OUTLETS |
(U.K. model) .......................................... |
1 SWITCHED OUTLET |
Use these to connect the power cords from your components to this unit.
The power to the SWITCHED outlets is controlled by this unit’s POWER switch or the provided remote control transmitter’s POWER key. These outlets will supply power to any component whenever this unit is turned on.
The maximum power (total power consumption of components) that can be connected to the SWITCHED AC OUTLET(S) is 100 watts.
REMOTE CONTROL (PHONO) connector
RX-485 RDS only
If you have a YAMAHA turntable with a terminal for remote control, connect it to this connector by using the cable provided with the turntable. This connection allows you to control the turntable from the provided remote control transmitter.
GND terminal (For turntable use)
Connecting the ground wire of the turntable to this terminal will normally minimize hum, but in some cases better results may be obtained with the ground wire disconnected.
8
Loading...