Yamaha NS-P116, NS-P110 User Manual

0 (0)

U

NS-P110 NS-P116

(NS-P110/NS-P116: NX-E130 + NX-C130 + SW-P130)

HOME CINEMA 5.1CH SPEAKER PACKAGE HOME CINEMA 6.1CH SPEAKER PACKAGE

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT

Please record the serial number of this system in the space below.

Model:

Serial No.:

The serial number is located on the rear of the main unit.

Retain this Owner’s Manual in a safe place for future reference.

II

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Be sure to allow spaces of at least 20 cm above, behind and on both sides of the subwoofer.

Do not place the following objects on this unit: A vessel with water in it.

If the vessel falls by vibrations and water spills, it may cause damage to the unit, and/or you may get an electric shock.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE : DO NOT MODIFY THIS

Compliance with FCC regulations does not guarantee that

UNIT!

interference will not occur in all installations. If this

This product, when installed as indicated in the

product is found to be the source of interference, which

instructions contained in this manual, meets FCC

can be determined by turning the unit “OFF” and “ON”,

requirements. Modifications not expressly approved

please try to eliminate the problem by using one of the

by Yamaha may void your authority, granted by the

following measures:

FCC, to use the product.

Relocate either this product or the device that is being

2. IMPORTANT : When connecting this product to

affected by the interference.

accessories and/or another product use only high

 

quality shielded cables. Cable/s supplied with this

Utilize power outlets that are on different branch (circuit

product MUST be used. Follow all installation

breaker or fuse) circuits or install AC line filter/s.

instructions. Failure to follow instructions could void

In the case of radio or TV interference, relocate/reorient

your FCC authorization to use this product in the

USA.

the antenna. If the antenna lead-in is 300 ohm ribbon

3. NOTE : This product has been tested and found to

lead, change the lead-in to coaxial type cable.

comply with the requirements listed in FCC

If these corrective measures do not produce satisfactory

Regulations, Part 15 for Class “B” digital devices.

results, please contact the local retailer authorized to

Compliance with these requirements provides a

distribute this type of product. If you can not locate the

reasonable level of assurance that your use of this

appropriate retailer, please contact Yamaha Electronics

product in a residential environment will not result in

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

harmful interference with other electronic devices.

90620.

 

This equipment generates/uses radio frequencies

The above statements apply ONLY to those products

and, if not installed and used according to the

distributed by Yamaha Corporation of America or its

instructions found in the users manual, may cause

subsidiaries.

interference harmful to the operation of other

 

electronic devices.

 

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

III

Yamaha NS-P116, NS-P110 User Manual

UNPACKING

Please check to make sure all listed items are included.

Front and rear speakers

(and rear center speaker for NS-P116)

NX-E130

<NS-P110>

X 4

<NS-P116>

X 5

● Center speaker

NX-C130

● Subwoofer

SW-P130

SUBWOOFER SYSTEM YST SW005

● Speaker cables

[10m]

X 3

<NS-P110>

X 2

<NS-P116>

X 3

● Subwoofer cable

● Fasteners (for NX-C130)

X 2

● Nonskid pads (for NX-E130)

<NS-P110>

X 2

<NS-P116>

X 3

● Nonskid pads (for SW-P130)

IV

Thank you for selecting this YAMAHA NS-P110/NS-P116 Speaker Package.

CAUTION: Read this before operating your unit.

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electric shock, do not expose the speakers to rain or water.

To prevent the enclosure from warping or discoloring, do not place the speakers where they will be exposed to direct sunlight or excessive humidity.

Avoid installing the speakers where foreign objects may fall onto them and/or where they may be exposed to liquid dripping or splashing.

Do not place the following objects on top of the speakers:

Other components, as they might cause damage and/or discoloration on the surface of the speakers.

Burning objects (i.e. candles), as they might cause fire, damage to the speakers and/or personal injury.

Containers with liquid in them, as they might cause electric shock to the user and/or damage to the speakers.

Do not place the speakers where they are liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance.

Placing the speakers on the same shelf or rack as the turntable can result in feedback.

Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers.

Any time you note distortion, reduce the volume control on your amplifier to a lower setting. Never allow your amplifier to be driven into “clipping”. Otherwise the speakers may be damaged.

When using an amplifier with a rated output power higher than the nominal input power of the speakers, care should be taken never to exceed the speakers’ maximum input.

Do not attempt to clean the speakers with chemical solvents as this might damage the finish. Use a clean, dry cloth.

Do not attempt to modify or fix the speakers. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reason.

Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the speakers are faulty.

For SW-P130

Do not operate this unit upside down. It may overheat, possibly causing damage.

Do not use excessive force on switches, controls or connection wires. When moving this unit, first disconnect the power plug and the wires connected to other equipments. Never pull the wires themselves.

Since this unit has a built-in power amplifier, heat will radiate from the rear panel. Place the unit apart from the walls, allowing at least 20 cm of space above, behind and on both sides of the unit to prevent fire or damage. Furthermore, do not position with the rear panel facing down on the floor or other surfaces.

When using a humidifier, be sure to avoid condensation inside this unit by allowing enough spaces around this unit or avoiding excess humidification. Condensation might cause a fire, damage to this unit, and/or electric shock.

Do not cover the rear panel of this unit with a newspaper, a tablecloth, a curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit and/or personal injury.

Do not plug in this unit to a wall outlet until all connections are completed.

The voltage to be used must be the same as that specified on the rear panel. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

To prevent lightning damage, disconnect the AC power plug when there is an electric storm.

Super-bass frequencies reproduced by this unit may cause a turntable to generate a howling sound. In such a case, move this unit away from the turntable.

This unit may be damaged if certain sounds are continuously outputted at high volume level. For example, if 20 Hz–50 Hz sine waves from a test disc, bass sounds from electronic instruments, etc. are continuously outputted, or when the stylus of a turntable touches the surface of a disc, reduce the volume level to prevent this unit from being damaged.

If you hear distorted noise (i.e. unnatural, intermittent “rapping” or “hammering” sounds) coming from this unit, reduce the volume level. Extremely loud playing of a movie soundtrack’s low frequency, bass-heavy sounds or similarly loud popular music passages can damage this speaker system.

Vibration generated by super-bass frequencies may distort images on a TV. In such a case, move this unit away from the TV set.

When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

When not planning to use this unit for a long period (i.e. vacation, etc.), disconnect the AC power plug from the wall outlet.

VOLTAGE SELECTOR

(For China, Korean and General models) The voltage selector switch on

the rear panel of this unit must

 

 

 

 

 

 

 

be set for your local main

 

 

 

 

 

 

 

voltage BEFORE plugging this

110V-120V

 

 

 

VOLTAGE

 

 

 

 

 

SELECTOR

unit into the AC main supply.

220V-240V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Voltages are 110-120/220-240 V AC,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50/60 Hz.

 

 

 

 

 

 

 

Standby mode

If the POWER switch is set to the ON position and the AUTO STANDBY switch is set to the HIGH or LOW position, this unit turns into the standby mode when no signal is received by this unit for 7 to 8 minutes.

In this state, this unit is designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

English

E-1

COMPONENTS OF THE PACKAGE

The speaker package “NS-P110 and NS-P116” is designed for use in a multi-channel audio system such as a home theater system.

NS-P110 includes four NX-E130 speaker systems, one NX-

C130 speaker system and one SW-P130 subwoofer system.

NS-P116 includes five NX-E130 speaker systems, one NXC130 speaker system and one SW-P130 subwoofer system.

<NX-E130>

Full range acoustic-suspension speaker system used for the front and rear speakers (and rear center speaker for NS-P116)

<NX-C130>

Full range acoustic-suspension speaker system used for the center speaker

<SW-P130>

Active Servo Processing Subwoofer System with a built-in power amplifier

This subwoofer system employs Advanced Yamaha

Active Servo Technology which YAMAHA has developed for reproducing higher quality super-bass sound. (Refer to page 12 for details on Advanced Yamaha Active Servo

Technology.) This super-bass sound adds a more realistic, theater-in-the-home effect to your stereo system.

The AUTO STANDBY switch saves you the trouble of setting the POWER switch to the ON or OFF position.

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

........ II

UNPACKING ..................................................

IV

CAUTION .........................................................

1

COMPONENTS OF THE PACKAGE .............

2

SETTING UP THE SPEAKERS ......................

3

Placing the subwoofer .......................................

4

Placing the center speaker ................................

4

Mounting the front/rear speakers (and rear center

speaker for NS-P116) ........................................

5

Placing the front/rear speakers (and rear center

speaker for NS-P116) ........................................

6

CONNECTIONS..............................................

7

An example of basic connections ......................

7

How to connect speaker cables ........................

8

USING THE SUBWOOFER (SW-P130) .........

9

Controls and their functions ...............................

9

Automatic-power-switching function ................

10

Adjusting the subwoofer before use ................

10

Frequency characteristics ...............................

11

ADVANCED YAMAHA ACTIVE SERVO

 

TECHNOLOGY (for SW-P130) ....................

12

TROUBLESHOOTING ..................................

13

SPECIFICATIONS ........................................

14

E-2

Loading...
+ 13 hidden pages