Yamaha MU50E2, MU50 User Manual

TONE GENERATOR

SOUND LIST & MIDI DATA

				MU50 Effect Type List
REVERB
No.	Exclusive		Effect Type	Description
	msb lsb
0	0	0	NO EFFECT	Effect turned off.
1	1	0	HALL1	Reverb simulating the resonance of a hall.
2	1	1	HALL2	Reverb simulating the resonance of a hall.
3	2	0	ROOM1	Reverb simulating the resonance of a room.
4	2	1	ROOM2	Reverb simulating the resonance of a room.
5	2	2	ROOM3	Reverb simulating the resonance of a room.
6	3	0	STAGE1	Reverb appropriate for a solo instrument.
7	3	1	STAGE2	Reverb appropriate for a solo instrument.
8	4	0	PLATE	Reverb simulating a metal plate reverb unit.
9	10	0	WHITE ROOM	A unique short reverb with a bit of initial delay.
10	11	0	TUNNEL	Simulation of a tunnel space expanding to left and right.
11	13	0	BASEMENT	A bit of initial delay followed by reverb with a unique resonance.
CHORUS
No.	Exclusive		Effect Type	Description
	msb lsb
0	0	0	NO EFFECT	Effect turned off.
1	41	0	CHORUS1	Conventional chorus program that adds natural spaciousness.
2	41	1	CHORUS2	Conventional chorus program that adds natural spaciousness.
3	41	2	CHORUS3	Conventional chorus program that adds natural spaciousness.
4	41	8	CHORUS4	Chorus with stereo input. The pan setting specified for the Part will also apply to the effect sound.
5	42	0	CELESTE1	A 3-phase LFO adds modulation and spaciousness to the sound.
6	42	1	CELESTE2	A 4-phase LFO adds modulation and spaciousness to the sound.
7	42	2	CELESTE3	A 5-phase LFO adds modulation and spaciousness to the sound.
8	42	8	CELESTE4	CELESTE with stereo input. The pan setting specified for the Part will also apply to the effect sound.
9	43	0	FLANGER1	Adds a jet-airplane effect to the sound.
10	43	1	FLANGER2	Adds a jet-airplane effect to the sound.
11	43	8	FLANGER3	Adds a jet-airplane effect to the sound.
VARIATION
No.	Exclusive		Effect Type	Description
	msb lsb
0	0	0	NO EFFECT	Effect turned off.
1	1	0	HALL1	Reverb simulating the resonance of a hall.
2	1	1	HALL2	Reverb simulating the resonance of a hall.
3	2	0	ROOM1	Reverb simulating the resonance of a room.
4	2	1	ROOM2	Reverb simulating the resonance of a room.
5	2	2	ROOM3	Reverb simulating the resonance of a room.
6	3	0	STAGE1	Reverb appropriate for a solo instrument.
7	3	1	STAGE2	Reverb appropriate for a solo instrument.
8	4	0	PLATE	Reverb simulating a metal plate reverb unit.
9	5	0	DELAY L,C,R	A program that creates three delay sounds; L, R, and C (center).
10	6	0	DELAY L,R	A program that creates two delay sounds; L and R. Two feedback delays are provided.
11	7	0	ECHO	Two delays (L and R) and independent feedback delays for L and R.
12	8	0	CROSS DELAY	A program that crosses the feedback of two delays.
13	9	0	ER1	An effect that produces only the early reflection component	of reverb.
14	9	1	ER2	An effect that produces only the early reflection component	of reverb.
15	A	0	GATE REVERB	A simulation of gated reverb.
16	B	0	REVERSE GATE	A program that simulates gated reverb played backwards.
17	14	0	KARAOKE 1	A delay with feedback of the same type as used for karaoke reverb.
18	14	1	KARAOKE 2	A delay with feedback of the same type as used for karaoke reverb.
19	14	2	KARAOKE 3	A delay with feedback of the same type as used for karaoke reverb.
20	41	0	CHORUS1	A conventional chorus program, providing natural spaciousness.
21	41	1	CHORUS2	A conventional chorus program, providing natural spaciousness.
22	41	2	CHORUS3	A conventional chorus program, providing natural spaciousness.
23	41	8	CHORUS4	Chorus with stereo input.
24	42	0	CELESTE1	A 3-phase LFO adds modulation and spaciousness to the sound.
25	42	1	CELESTE2	A 4-phase LFO adds modulation and spaciousness to the sound.
26	42	2	CELESTE3	A 5-phase LFO adds modulation and spaciousness to the sound.
27	42	8	CELESTE4	Celeste with stereo input.
28	43	0	FLANGER1	Adds a jet-airplane effect to the sound.
29	43	1	FLANGER2	Adds a jet-airplane effect to the sound.
30	43	8	FLANGER3	Adds a jet-airplane effect to the sound.
31	44	0	SYMPHONIC	A multi-phase version of CELESTE.
32	45	0	ROTARY SPEAKER	A simulation of a rotary speaker. You can use an AC1 (assignable controller) etc. to control the speed of rotation.
33	46	0	TREMOLO	An effect that cyclically modulates the volume.
34	47	0	AUTO PAN	A program that cyclically moves the sound image to left and right, front and back.
35	48	0	PHASER1	Cyclically changes the phase to add modulation to the sound.
36	48	8	PHASER2	Phaser with stereo input.
37	49	0	DISTORTION	Adds a sharp-edged distortion to the sound.
38	4A	0	OVER DRIVE	Adds mild distortion to the sound.
39	4B	0	AMP SIMULATOR	A simulation of a guitar amp.
40	4C	0	3-BAND EQ(MONO)	A mono EQ with adjustable LOW, MID, and HIGH equalizing.
41	4D	0	2-BAND EQ(STEREO)	A stereo EQ with adjustable LOW and HIGH. Ideal for drum Parts.
42	4E	0	AUTO WAH(LFO)	Cyclically modulates the center frequency of a wah filter. With an AC1 etc. this can function as a pedal wah.
43	40	0	THRU	Bypass without applying an effect.

1

MU50 Effect Parameter List

				parameter 1~10 = required parameters
BASIC EFFECT TYPE				parameter 11~16 = optional parameters
No. Parameter	Display	Value See Table	MU80	MU50	Control

CHORUS1,2,3,4

CELESTE1,2,3,4					•
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	LFO PM Depth	0~127	0-63		•
3	Feedback Level	-63~+63	1-127		•
4	Delay Offset	0~127	0-127	table#2	•
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ Low Gain	-12~+12dB	52-76		•
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
9	EQ High Gain	-12~+12dB	52-76		•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127		•
11	EQ Mid Frequency	100Hz~10.0kHz	14-54	table#3	•
12	EQ Mid Gain	-12~+12dB	52-76		•
13	EQ Mid Width	1.0~12.0	10-120		•
14	LFO AM Depth	0~127	0-127		•
15	Input Mode	mono/stereo	0-1
16
FLANGER1,2,3					•
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	LFO Depth	0~127	0-127		•
3	Feedback Level	-63~+63	1-127		•
4	Delay Offset	0~63	0-63	table#2	•
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ Low Gain	-12~+12dB	52-76		•
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
9	EQ High Gain	-12~+12dB	52-76		•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127		•
11	EQ Mid Frequency	100Hz~10.0kHz	14-54	table#3	•
12	EQ Mid Gain	-12~+12dB	52-76		•
13	EQ Mid Width	1.0~12.0	10-120		•
14	LFO Phase Difference	-180~+180deg	4-124	resolution = 30deg.	•
15
16
SYMPHONIC					•
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	LFO Depth	0~127	0-127		•
3	Delay Offset	0~127	0-127	table#2	•
4
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ Low Gain	-12~+12dB	52-76		•
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
9	EQ High Gain	-12~+12dB	52-76		•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127		•
11	EQ Mid Frequency	100Hz~10.0kHz	14-54	table#3	•
12	EQ Mid Gain	-12~+12dB	52-76		•
13	EQ Mid Width	1.0~12.0	10-120		•
14
15
16
ROTARY SPEAKER					•
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	LFO Depth	0~127	0-127		•
3
4
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ Low Gain	-12~+12dB	52-76		•
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
9	EQ High Gain	-12~+12dB	52-76		•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127		•
11	EQ Mid Frequency	100Hz~10.0kHz	14-54	table#3	•
12	EQ Mid Gain	-12~+12dB	52-76		•
13	EQ Mid Width	1.0~12.0	10-120		•
14
15
16
TREMOLO					•
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	AM Depth	0~127	0-127		•
3	PM Depth	0~127	0-127		•
4
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ Low Gain	-12~+12dB	52-76		•
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
9	EQ High Gain	-12~+12dB	52-76		•
10					•
11	EQ Mid Frequency	100Hz~10.0kHz	14-54	table#3
12	EQ Mid Gain	-12~+12dB	52-76		•

•
•T 0-127
•
••
•
•	•
•
•
•
•
•
•
••
•
•	•
•
T resolution = 3deg.
•
•
•
••
•
•	•
•
•	•
•
••
•
•
•
•	•
•
•
••
•
•

2

MU50 Effect Parameter List

No.	Parameter	Display	Value	See Table	MU80
13	EQ Mid Width	1.0~12.0	10-120		•
14	LFO Phase Difference	-180~+180deg	4-124	resolution = 30deg. •
15	Input Mode	mono/stereo	0-1
16
AUTO PAN					•
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	L/R Depth	0~127	0-127		•
3	F/R Depth	0~127	0-127		•
4	PAN Direction	L<->R,L->R,L<-R,Lturn,Rturn,L/R	0-5		•
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ Low Gain	-12~+12dB	52-76		•
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
9	EQ High Gain	-12~+12dB	52-76		•
10					•
11	EQ Mid Frequency	100Hz~10.0kHz	14-54	table#3
12	EQ Mid Gain	-12~+12dB	52-76		•
13	EQ Mid Width	1.0~12.0	10-120		•
14
15
16
PHASER1,PHASER2					•
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	LFO Depth	0~127	0-127		•
3	Phase Shift Offset	0~127	0-127		•
4	Feedback Level	-63~+63	1-127		•
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ Low Gain	-12~+12dB	52-76		•
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
9	EQ High Gain	-12~+12dB	52-76		•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127		•
11	Stage	3~10	3-10		▲ 4,6,8,
12	Diffusion	Mono/Stereo	0-1		•
13	LFO Phase Difference	-180~+180deg.	4-124	resolution = 3deg.
14
15
16
DISTORTION
OVERDRIVE					•
1	Drive	0~127	0-127
2	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	• 4-40	32Hz~2.0kHz
3	EQ Low Gain	-12~+12dB	52-76		•
4	LPF Cutoff	1.0k~Thru	34-60	table#3	•
5	Output Level	0~127	0-127		•
6
7	EQ Mid Frequency	500Hz~10.0kHz	28-54	table#3	T 14-54 100Hz~10.0kHz
8	EQ Mid Gain	-12~+12dB	52-76		•
9	EQ Mid Width	1.0~12.0	10-120		•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127		•
11	Edge(Clip Curve)	0~127	0-127	mild~sharp
12
13
14
15
16
GUITAR AMP SIMULATOR					•
1	Drive	0~127	0-127
2	AMP Type	Off,Stack,Combo,Tube	0-3		•
3	LPF Cutoff	1.0k~Thru	34-60	table#3	•
4	Output Level	0~127	0-127		•
5
6
7
8
9					•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	Edge(Clip Curve)	0~127	0-127	mild~sharp
12
13
14
15
16
3-BAND EQ					•
1	EQ Low Gain	-12~+12dB	52-76
2	EQ Mid Frequency	500Hz~10.0kHz	28-54	table#3	T 14-54 100Hz~10.0kHz
3	EQ Mid Gain	-12~+12dB	52-76		•
4	EQ Mid Width	1.0~12.0	10-120		•
5	EQ High Gain	-12~+12dB	52-76		•
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3	T 4-40	32Hz~2.0kHz
7	EQ High Frequency	500Hz~16.0kHz	28-58	table#3	•
8
9

10

11

12

MU50	Control
T resolution = 3deg.
•
•	•
•
•
•
••
•
•

•
•
•
•
••
•
•	•
•

•▲ 6~10(phaser1) / 3~5(phaser2)

• phaser2 only

••	•
•
•
•
••
•
••
•	•
•
•
•
••
••
•
•
••
•

3

MU50 Effect Parameter List

No.	Parameter	Display	Value	See Table
13
14
15
16
2-BAND EQ
1	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3
2	EQ Low Gain	-12~+12dB	52-76
3	EQ High Frequency	500Hz~16.0kHz	28-58	table#3
4	EQ High Gain	-12~+12dB	52-76
5
6
7
8
9
10
11	EQ Mid Frequency	100Hz~10.0kHz	14-54	table#3
12	EQ Mid Gain	-12~+12dB	52-76
13	EQ Mid Width	1.0~12.0	10-120
14
15
16
AUTO WAH
1	LFO Frequency	0.00~39.7Hz	0-127	table#1
2	LFO Depth	0~127	0-127
3	Cutoff Frequency Offset	0~127	0-127
4	Resonance	1.0~12.0	10-120
5
6	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3
7	EQ Low Gain	-12~+12dB	52-76
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3
9	EQ High Gain	-12~+12dB	52-76
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	Drive	0~127	0-127
12
13
14
15
16
HALL1,HALL2
ROOM1,ROOM2,ROOM3
STAGE1,STAGE2
PLATE
1	Reverb Time	0.3~30.0s	0-69	table#4
2	Diffusion	0~10	0-10
3	Initial Delay	0~63	0-63	table#5
4	HPF Cutoff	Thru~8.0kHz	0-52	table#3
5	LPF Cutoff	1.0k~Thru	34-60	table#3
6
7
8
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	Rev Delay	0~63	0-63	table#5
12	Density	0~3	0-3
13	Er/Rev Balance	E63>R ~ E=R ~ E<R63	1-127
14	High Damp	0.1~1.0	1-10
15	Feedback Level	-63~+63	1-127
16
DELAY L,C,R
1	Lch Delay	0.1~715.0ms	1-7150
2	Rch Delay	0.1~715.0ms	1-7150
3	Cch Delay	0.1~715.0ms	1-7150
4	Feedback Delay	0.1~715.0ms	1-7150
5	Feedback Level	-63~+63	1-127
6	Cch Level	0~127	0-127
7	High Damp	0.1~1.0	1-10
8
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	HPF Cutoff	Thru~8.0kHz	0-52	table#3
12	LPF Cutoff	1.0k~Thru	34-60	table#3
13	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3
14	EQ Low Gain	-12~+12dB	52-76
15	EQ High Frequency	500Hz~16.0kHz	28-58	table#3
16	EQ High Gain	-12~+12dB	52-76
DELAY L,R
1	Lch Delay	0.1~715.0ms	1-7150
2	Rch Delay	0.1~715.0ms	1-7150
3	Feedback Delay 1	0.1~715.0ms	1-7150
4	Feedback Delay 2	0.1~715.0ms	1-7150
5	Feedback Level	-63~+63	1-127
6	High Damp	0.1~1.0	1-10

MU80		MU50	Control
T 4-40	32Hz~2.0kHz	•
•		•
•		•
•		•
•
•
•
•		•
•		•	•
•		•
•		•
T 4-40	32Hz~2.0kHz	•
•		•
•		•
•		•
•		•
•

•	•
•	•
•	•
•	•
•	•
•	•	•
•	•
T 0-4 *REV(0-4),VAR(0-3)	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•	•
•
•	•
	•
	•
	•
•	•
•	•
•	•
•	•
•	•
•	•

4

MU50 Effect Parameter List

No.	Parameter	Display	Value	See Table
7
8
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	HPF Cutoff	Thru~8.0kHz	0-52	table#3
12	LPF Cutoff	1.0k~Thru	34-60	table#3
13	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3
14	EQ Low Gain	-12~+12dB	52-76
15	EQ High Frequency	500Hz~16.0kHz	28-58	table#3
16	EQ High Gain	-12~+12dB	52-76
ECHO
1	Lch Delay1	0.1~355.0ms	1-3550
2	Lch Feedback Level	-63~+63	1-127
3	Rch Delay1	0.1~355.0ms	1-3550
4	Rch Feedback Level	-63~+63	1-127
5	High Damp	0.1~1.0	1-10
6	Lch Delay2	0.1~355.0ms	1-3550
7	Rch Delay2	0.1~355.0ms	1-3550
8	Delay2 Level	0~127	0-127
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	HPF Cutoff	Thru~8.0kHz	0-52	table#3
12	LPF Cutoff	1.0k~Thru	34-60	table#3
13	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3
14	EQ Low Gain	-12~+12dB	52-76
15	EQ High Frequency	500Hz~16.0kHz	28-58	table#3
16	EQ High Gain	-12~+12dB	52-76
CROSS DELAY
1	L->R Delay	0.1~355.0ms	1-3550
2	R->L Delay	0.1~355.0ms	1-3550
3	Feedback Level	-63~+63	1-127
4	Input Select	L,R,L&R	0-2
5	High Damp	0.1~1.0	1-10
6
7
8
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	HPF Cutoff	Thru~8.0kHz	0-52	table#3
12	LPF Cutoff	1.0k~Thru	34-60	table#3
13	EQ Low Frequency	50Hz~2.0kHz	8-40	table#3
14	EQ Low Gain	-12~+12dB	52-76
15	EQ High Frequency	500Hz~16.0kHz	28-58	table#3
16	EQ High Gain	-12~+12dB	52-76
EARLY REF1,EARLY REF2
1	Type	S-H, L-H, Rdm, Rvs, Plt, Spr	0-5
2	Room Size	0.1~7.0	0-44	table#6
3	Diffusion	0~10	0-10
4	Initial Delay	0~63	0-63	table#5
5	Feedback Level	-63~+63	1-127
6	HPF Cutoff	Thru~8.0kHz	0-52
7	LPF Cutoff	1.0k~Thru	34-60
8
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	Liveness	0~10	0-10
12	Density	0~3	0-3
13	High Damp	0.1~1.0	1-10
14
15
16
GATE REVERB
REVERSE GATE
1	Type	TypeA,TypeB	0-1
2	Room Size	0.1~7.0	0-44	table#6
3	Diffusion	0~10	0-10
4	Initial Delay	0~63	0-63	table#5
5	Feedback Level	-63~+63	1-127
6	HPF Cutoff	Thru~8.0kHz	0-52
7	LPF Cutoff	1.0k~Thru	34-60
8
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	Liveness	0~10	0-10
12	Density	0~3	0-3
13	High Damp	0.1~1.0	1-10
14
15
16
OPTION EFFECT TYPE
PITCH CHANGE
1	Pitch	-24~+24	40-88
2	Initial Delay	0~127	0-127	table#7

MU80 MU50 Control

•	•	•
•
•	•
	•
	•
	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•	•
•
•	•
	•
	•
	•
•	•
•	•
•	•
•	•
•	•
•	•	•
•
•	•
	•
	•
	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•	•
•	•
•	•
•	•

•	•
•	•
•	•
•	•
•	•
•	•
•	•
•	•	•
•	•
•	•
•	•

•

•

5

MU50 Effect Parameter List

No.	Parameter	Display	Value	See Table
3	Fine 1	-50~+50	14-114
4	Fine 2	-50~+50	14-114
5	Feedback Gain	-99~+99%	1-127
6
7
8
9
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	Pan 1	L63~R63	1-127
12	Output Level 1	0~127	0-127
13	Pan 2	L63~R63	1-127
14	Output Level 2	0~127	0-127
15
16
AURAL EXICETER
1	HPF cutoff	500Hz~16.0kHz	28-58
2	Drive	0~127	0-127
3	Mix Level	0~127	0-127
4
5
6
7
8
9
10
11
12
13
14
15
16
TOUCH WAH,WAH+DIST
1	Sensitive	0~127	0-127
2	Cutoff Frequency Offset	0~127	0-127
3	Resonance	1.0~12.0	10-120
4
5
6	EQ Low Frequency	32Hz~2.0kHz	4-40	table#3
7	EQ Low Gain	-12~+12dB	52-76
8	EQ High Frequency	500Hz~16.0kHz	28-58	table#3
9	EQ High Gain	-12~+12dB	52-76
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11	Drive	0~127	0-127
12
13
14
15
16
COMPRESSOR
1	Attack	1~40ms	0-19	table#8
2	Release	10~680ms	0-15	table#9
3	Threshold	-48~-6dB	79-121
4	Ratio	1.0~20.0	0-7	table#10
5	Output Level	0~127	0-127
6
7
8
9
10
11
12
13
14
15
16
NOISE GATE
1	Attack	1~40ms	0-19	table#8
2	Release	10~680ms	0-15	table#9
3	Threshold	-72~-30dB	55-97
4	Output Level	0~127	0-127
5
6
7
8
9
10
11	Ratio	1.0~5.0	0-7
12
13
14

15

16

MU80	MU50	Control
•
•
•
•		•
•
•

•

•

•

•

•

•

• •

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

6

MU50 Effect Parameter List

No.	Parameter	Display	Value	See Table	MU80	MU50	Control
WHITE ROOM
TUNNEL
CANYON (MU80 Only)
BASEMENT					•	•
1	Reverb Time	0.3~30.0s	0-69	table#4
2	Diffusion	0~10	0-10		•	•
3	Initial Delay	0~63	0-63	table#5	•	•
4	HPF Cutoff	Thru~8.0kHz	0-52	table#3	•	•
5	LPF Cutoff	1.0k~Thru	34-60	table#3	•	•
6	Width	0.5~10.2m	0-37	table#11	•	•
7	Heigt	0.5~20.2m	0-73	table#11	•	•
8	Depth	0.5~30.2m	0-104	table#11	•	•
9	Wall Vary	0~30	0-30		•	•	•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127		•	•
11	Rev Delay	0~63	0-63	table#5	•	•
12	Density	0~3	0-3		T 0-4	*REV(0-4),VAR(0-3) •
13	Er/Rev Balance	E63>R ~ E=R ~ E<R63	1-127		•	•
14	High Damp	0.1~1.0	1-10		•	•
15	Feedback Level	-63~+63	1-127
16
KARAOKE1,2,3					•	•
1	Delay Time	0~127	0-127	table#7
2	Feedback Level	-63~+63	1-127		•	•
3	HPF Cutoff	Thru~8.0kHz	0-52		•	•
4	LPF Cutoff	1.0k~Thru	34-60		•	•
5
6
7
8
9					•	•	•
10	Dry/Wet	D63>W ~ D=W ~ D<W63	1-127
11
12
13

14

15

16

7

Changes from the MU80

Delete tables #8,#9,#10(comp attack time,comp release time, comp ratio).

Exchange table#1 with updated table

	table#1						table#2					table#3			table#4					table#5					table#6			table#7					table#8
	LFO Frequency						Modulation Delay Offset					EQ Frequency			Reverb time					Delay Time(200.0ms)					Room Size			Delay Time(400.0ms)					Reverb Width;Depth;Height
	Data	Value		Data	Value		Data	Value	Data	Value		Data	Value		Data	Value	Data	Value		Data	Value	Data	Value		Data	Value		Data	Value	Data	Value		Data	Value	Data	Value
	0	0		64	2.69		0	0.0	64	6.4		8	50		0	0.3	64	17.0		0	0.1	64	100.8		0	0.1		0	0.1	64	201.6		0	0.5	64	17.6
	1	0.04		65	2.77		1	0.1	65	6.5		9	56		1	0.4	65	18.0		1	1.7	65	102.4		1	0.3		1	3.2	65	204.8		1	0.8	65	17.9
	2	0.08		66	2.86		2	0.2	66	6.6		10	63		2	0.5	66	19.0		2	3.2	66	104.0		2	0.4		2	6.4	66	207.9		2	1.0	66	18.2
	3	0.12		67	2.94		3	0.3	67	6.7		11	70		3	0.6	67	20.0		3	4.8	67	105.6		3	0.6		3	9.5	67	211.1		3	1.3	67	18.5
	4	0.16		68	3.02		4	0.4	68	6.8		12	80		4	0.7	68	25.0		4	6.4	68	107.1		4	0.7		4	12.7	68	214.2		4	1.5	68	18.8
	5	0.21		69	3.11		5	0.5	69	6.9		13	90		5	0.8	69	30.0		5	8.0	69	108.7		5	0.9		5	15.8	69	217.4		5	1.8	69	19.1
	6	0.25		70	3.19		6	0.6	70	7.0		14	100		6	0.9				6	9.5	70	110.3		6	1.0		6	19.0	70	220.5		6	2.0	70	19.4
	7	0.29		71	3.28		7	0.7	71	7.1		15	110		7	1.0				7	11.1	71	111.9		7	1.2		7	22.1	71	223.7		7	2.3	71	19.7
	8	0.33		72	3.36		8	0.8	72	7.2		16	125		8	1.1				8	12.7	72	113.4		8	1.4		8	25.3	72	226.8		8	2.6	72	20.0
	9	0.37		73	3.44		9	0.9	73	7.3		17	140		9	1.2				9	14.3	73	115.0		9	1.5		9	28.4	73	230.0		9	2.8	73	20.2
	10	0.42		74	3.53		10	1.0	74	7.4		18	160		10	1.3				10	15.8	74	116.6		10	1.7		10	31.6	74	233.1		10	3.1	74	20.5
	11	0.46		75	3.61		11	1.1	75	7.5		19	180		11	1.4				11	17.4	75	118.2		11	1.8		11	34.7	75	236.3		11	3.3	75	20.8
	12	0.50		76	3.70		12	1.2	76	7.6		20	200		12	1.5				12	19.0	76	119.7		12	2.0		12	37.9	76	239.4		12	3.6	76	21.1
	13	0.54		77	3.86		13	1.3	77	7.7		21	225		13	1.6				13	20.6	77	121.3		13	2.1		13	41.0	77	242.6		13	3.9	77	21.4
	14	0.58		78	4.03		14	1.4	78	7.8		22	250		14	1.7				14	22.1	78	122.9		14	2.3		14	44.2	78	245.7		14	4.1	78	21.7
	15	0.63		79	4.20		15	1.5	79	7.9		23	280		15	1.8				15	23.7	79	124.4		15	2.5		15	47.3	79	248.9		15	4.4	79	22.0
	16	0.67		80	4.37		16	1.6	80	8.0		24	315		16	1.9				16	25.3	80	126.0		16	2.6		16	50.5	80	252.0		16	4.6	80	22.4
	17	0.71		81	4.54		17	1.7	81	8.1		25	355		17	2.0				17	26.9	81	127.6		17	2.8		17	53.6	81	255.2		17	4.9	81	22.7
	18	0.75		82	4.71		18	1.8	82	8.2		26	400		18	2.1				18	28.4	82	129.2		18	2.9		18	56.8	82	258.3		18	5.2	82	23.0
	19	0.79		83	4.87		19	1.9	83	8.3		27	450		19	2.2				19	30.0	83	130.7		19	3.1		19	59.9	83	261.5		19	5.4	83	23.3
	20	0.84		84	5.04		20	2.0	84	8.4		28	500		20	2.3				20	31.6	84	132.3		20	3.2		20	63.1	84	264.6		20	5.7	84	23.6
	21	0.88		85	5.21		21	2.1	85	8.5		29	560		21	2.4				21	33.2	85	133.9		21	3.4		21	66.2	85	267.7		21	5.9	85	23.9
	22	0.92		86	5.38		22	2.2	86	8.6		30	630		22	2.5				22	34.7	86	135.5		22	3.5		22	69.4	86	270.9		22	6.2	86	24.2
	23	0.96		87	5.55		23	2.3	87	8.7		31	700		23	2.6				23	36.3	87	137.0		23	3.7		23	72.5	87	274.0		23	6.5	87	24.5
	24	1.00		88	5.72		24	2.4	88	8.8		32	800		24	2.7				24	37.9	88	138.6		24	3.9		24	75.7	88	277.2		24	6.7	88	24.9
	25	1.05		89	6.05		25	2.5	89	8.9		33	900		25	2.8				25	39.5	89	140.2		25	4.0		25	78.8	89	280.3		25	7.0	89	25.2
	26	1.09		90	6.39		26	2.6	90	9.0		34	1.0k		26	2.9				26	41.0	90	141.8		26	4.2		26	82.0	90	283.5		26	7.2	90	25.5
8	27	1.13		91	6.72		27	2.7	91	9.1		35	1.1k		27	3.0				27	42.6	91	143.3		27	4.3		27	85.1	91	286.6		27	7.5	91	25.8
	28	1.17		92	7.06		28	2.8	92	9.2		36	1.2k		28	3.1				28	44.2	92	144.9		28	4.5		28	88.3	92	289.8		28	7.8	92	26.1
	29	1.22		93	7.40		29	2.9	93	9.3		37	1.4k		29	3.2				29	45.7	93	146.5		29	4.6		29	91.4	93	292.9		29	8.0	93	26.5
	30	1.26		94	7.73		30	3.0	94	9.4		38	1.6k		30	3.3				30	47.3	94	148.1		30	4.8		30	94.6	94	296.1		30	8.3	94	26.8
	31	1.30		95	8.07		31	3.1	95	9.5		39	1.8k		31	3.4				31	48.9	95	149.6		31	5.0		31	97.7	95	299.2		31	8.6	95	27.1
	32	1.34		96	8.41		32	3.2	96	9.6		40	2.0k		32	3.5				32	50.5	96	151.2		32	5.1		32	100.9	96	302.4		32	8.8	96	27.5
	33	1.38		97	8.74		33	3.3	97	9.7		41	2.2k		33	3.6				33	52.0	97	152.8		33	5.3		33	104.0	97	305.5		33	9.1	97	27.8
	34	1.43		98	9.08		34	3.4	98	9.8		42	2.5k		34	3.7				34	53.6	98	154.4		34	5.4		34	107.2	98	308.7		34	9.4	98	28.1
	35	1.47		99	9.42		35	3.5	99	9.9		43	2.8k		35	3.8				35	55.2	99	155.9		35	5.6		35	110.3	99	311.8		35	9.6	99	28.5
	36	1.51		100	9.75		36	3.6	100	10.0		44	3.2k		36	3.9				36	56.8	100	157.5		36	5.7		36	113.5	100	315.0		36	9.9	100	28.8
	37	1.55		101	10.0		37	3.7	101	11.1		45	3.6k		37	4.0				37	58.3	101	159.1		37	5.9		37	116.6	101	318.1		37	10.2	101	29.2
	38	1.59		102	10.7		38	3.8	102	12.2		46	4.0k		38	4.1				38	59.9	102	160.6		38	6.1		38	119.8	102	321.3		38	10.4	102	29.5
	39	1.64		103	11.4		39	3.9	103	13.3		47	4.5k		39	4.2				39	61.5	103	162.2		39	6.2		39	122.9	103	324.4		39	10.7	103	29.9
	40	1.68		104	12.1		40	4.0	104	14.4		48	5.0k		40	4.3				40	63.1	104	163.8		40	6.4		40	126.1	104	327.6		40	11.0	104	30.2
	41	1.72		105	12.7		41	4.1	105	15.5		49	5.6k		41	4.4				41	64.6	105	165.4		41	6.5		41	129.2	105	330.7		41	11.2
	42	1.76		106	13.4		42	4.2	106	17.1		50	6.3k		42	4.5				42	66.2	106	166.9		42	6.7		42	132.4	106	333.9		42	11.5
	43	1.80		107	14.1		43	4.3	107	18.6		51	7.0k		43	4.6				43	67.8	107	168.5		43	6.8		43	135.5	107	337.0		43	11.8
	44	1.85		108	14.8		44	4.4	108	20.2		52	8.0k		44	4.7				44	69.4	108	170.1		44	7.0		44	138.6	108	340.2		44	12.1
	45	1.89		109	15.4		45	4.5	109	21.8		53	9.0k		45	4.8				45	70.9	109	171.7					45	141.8	109	343.3		45	12.3
	46	1.93		110	16.1		46	4.6	110	23.3		54	10.0k		46	4.9				46	72.5	110	173.2					46	144.9	110	346.5		46	12.6
	47	1.97		111	16.8		47	4.7	111	24.9		55	11.0k		47	5.0				47	74.1	111	174.8					47	148.1	111	349.6		47	12.9
	48	2.01		112	17.5		48	4.8	112	26.5		56	12.0k		48	5.5				48	75.7	112	176.4					48	151.2	112	352.8		48	13.1
	49	2.06		113	18.1		49	4.9	113	28.0		57	14.0k		49	6.0				49	77.2	113	178.0					49	154.4	113	355.9		49	13.4
	50	2.10		114	19.5		50	5.0	114	29.6		58	16.0k		50	6.5				50	78.8	114	179.5					50	157.5	114	359.1		50	13.7
	51	2.14		115	20.8		51	5.1	115	31.2		59	18.0k		51	7.0				51	80.4	115	181.1					51	160.7	115	362.2		51	14.0
	52	2.18		116	22.2		52	5.2	116	32.8		60	THRU(20.0k)		52	7.5				52	81.9	116	182.7					52	163.8	116	365.4		52	14.2
	53	2.22		117	23.5		53	5.3	117	34.3					53	8.0				53	83.5	117	184.3					53	167.0	117	368.5		53	14.5
	54	2.27		118	24.8		54	5.4	118	35.9					54	8.5				54	85.1	118	185.8					54	170.1	118	371.7		54	14.8
	55	2.31		119	26.2		55	5.5	119	37.5					55	9.0				55	86.7	119	187.4					55	173.3	119	374.8		55	15.1
	56	2.35		120	27.5		56	5.6	120	39.0					56	9.5				56	88.2	120	189.0					56	176.4	120	378.0		56	15.4
	57	2.39		121	28.9		57	5.7	121	40.6					57	10.0				57	89.8	121	190.6					57	179.6	121	381.1		57	15.6
	58	2.43		122	30.2		58	5.8	122	42.2					58	11.0				58	91.4	122	192.1					58	182.7	122	384.3		58	15.9
	59	2.48		123	31.6		59	5.9	123	43.7					59	12.0				59	93.0	123	193.7					59	185.9	123	387.4		59	16.2
	60	2.52		124	32.9		60	6.0	124	45.3					60	13.0				60	94.5	124	195.3					60	189.0	124	390.6		60	16.5
	61	2.56		125	34.3		61	6.1	125	46.9					61	14.0				61	96.1	125	196.9					61	192.2	125	393.7		61	16.8
	62	2.60		126	37.0		62	6.2	126	48.4					62	15.0				62	97.7	126	198.4					62	195.3	126	396.9		62	17.1
	63	2.65		127	39.7		63	6.3	127	50.0					63	16.0				63	99.3	127	200.0					63	198.5	127	400.0		63	17.3

Table Assign Value Data MU50

MU50 EFFECT TYPE

REVERB TYPE

The following effect types are required under XG.

11typ

TYPE MSB

TYPE LSB

DEC

HEX

00

01

02

...

08

000

0

[0]

NO EFFECT

001

1

[1]

HALL1

[2]

HALL2

002

2

[3]

ROOM1

[4]

ROOM2

[5]

ROOM3

003

3

[6]

STAGE1

[7]

STAGE2

004

4

[8]

PLATE

005

5

NO EFFECT

:

:

:

015

F

NO EFFECT

016

10

[9]

WHITE ROOM

017

11

[10]

TUNNEL

018

12

NO EFFECT

019

13

[11]

BASEMENT

020

14

NO EFFECT

:

:

:

127

7F

NO EFFECT

NO EFFECT

same as BASIC EFFECT(LSB=0)

CHORUS TYPE

11type

TYPE MSB

TYPE LSB

DEC

HEX

00

01

02

...

08

000

0

[0]

NO EFFECT

001

1

NO EFFECT

:

:

:

064

40

NO EFFECT

065

41

[1]

CHORUS1

[2]

CHORUS2

[3]

CHORUS3

[4]

CHORUS4

066

42

[5]

CELESTE1

[6]

CELESTE2

[7]

CELESTE3

[8]

CELESTE4

067

43

[9]

FLANGER 1

[10] FLANGER 2

[11] FLANGER3

068

44

NO EFFECT

:

:

:

127

7F

NO EFFECT

NO EFFECT

same as BASIC EFFECT(LSB=0)

VARIATION TYPE(0~63)

42type

TYPE MSB

TYPE LSB

DEC

HEX

00

01

02

...

08

000

0

[0]

NO EFFECT

001

1

[1]

HALL1

[2]

HALL2

002

2

[3]

ROOM1

[4]

ROOM2

[5]

ROOM3

003

3

[6]

STAGE1

[7]

STAGE2

004

4

[8]

PLATE

005

5

[9]

DELAY L,C,R

006

6

[10]

DELAY L,R

007

7

[11]

ECHO

008

8

[12]

CROSS DELAY

009

9

[13]

ER1

[14] ER2

010

A

[15]

GATE REVERB

011

B

[16]

REVERSE GATE

012

C

NO EFFECT or THRU

:

:

:

019

13

NO EFFECT or THRU

020

14

[17]

KARAOKE1

[18] KARAOKE2

[19] KARAOKE3

021

15

NO EFFECT or THRU

:

:

:

063

3F

NO EFFECT or THRU

NO EFFECT (for SYS) or THRU (for INS)

same as BASIC EFFECT (LSB=0)

VARIATION TYPE(64~127)

TYPE MSB

TYPE LSB

DEC

HEX

00

01

02

...

08

064

40

[43]

THRU

065

41

[20]

CHORUS1

[21] CHORUS2

[22] CHORUS3

[23] CHORUS4

066

42

[24]

CELESTE1

[25] CELESTE2

[26] CELESTE3

[27] CELESTE4

067

43

[28]

FLANGER 1

[29] FLANGER 2

[30] FLANGER3

068

44

[31]

SYMPHONIC

069

45

[32]

ROTARY SPEAKER

070

46

[33]

TREMOLO

071

47

[34]

AUTO PAN

072

48

[35]

PHASER1

[36] PHASER2

073

49

[37]

DISTORTION

074

4A

[38]

OVER DRIVE

075

4B

[39]

AMP SIMULATOR

076

4C

[40]

3-BAND EQ(MONO)

077

4D

[41]

2-BAND EQ(STEREO)

078

4E

[42]

AUTO WAH(LFO)

079

4F

THRU

:

:

:

127

7F

THRU

THRU

same as BASIC EFFECT (LSB=0)

9

MU50 MIDI Data Format

1. Channel messages

1.1Key on / Key off

Reception note range =C-2~G8

Velocity range = 1~127 (Velocity is received only for Note Off)

Not received by a Part for which the Multi Part parameter Rcv NOTE MESSAGE = OFF

Not received by a Rhythm Part for which Rcv NOTE OFF = OFF

Key On is not received by a Rhythm Part for which Rcv NOTE ON = OFF

1.2Control change

Control Changes are not received by a Part for which the Multi Part parameter Rcv CONTROL CHANGE = OFF

1.2.1Bank Select

Cntrl#	parameter	Data Range
0	Bank Select MSB	0:Normal, 64:SFX, 126-127:Drum
32	Bank Select LSB	0...127

Bank Select processing is suspended until a Program Change is received. When Sound Module Mode = C/M, all Bank Select messages are ignored.

1.2.2Modulation

Cntrl#	parameter	Data Range
1	Modulation	0...127

When the Multi Part parameter Rcv MODULATION = OFF, that Part will not receive Modulation messages.

1.2.3Portamento Time

Cntrl#	parameter	Data Range
5	Portamento Time	0...127

When the parameter 1.2.9 Portamento = ON, this adjusts the speed of pitch change. A setting of 0 is minimum portamento time, and 127 is longest portamento time.

1.2.4Data Entry

Cntrl#	parameter	Data Range
6	Data Entry MSB	0...127
38	Data Entry LSB	0...127

Use this to set the value of the parameter specified by RPN and NRPN.

1.2.5Main Volume

Cntrl#	parameter	Data Range
7	Main Volume	0...127

When the Multi Part parameter Rcv VOLUME = OFF, that Part will not receive Volume messages.

1.2.6	Pan
	Cntrl#	parameter	Data Range
	10	Pan	0...127

0 is left, 127 is right.

When the Multi Part parameter Rcv PAN = OFF, that Part will not receive Pan messages.

1.2.7Expression

Cntrl#	parameter	Data Range
11	Expression	0...127

When the Multi Part parameter Rcv EXPRESSION = OFF, that Part will not receive Expression messages.

1.2.8Hold1

Cntrl#	parameter	Data Range
64	Hold1	0...127
		(0-63:off, 64-127:on)

When the Multi Part parameter Rcv HOLD1 = OFF, that Part will not receive Hold1 messages.

1.2.9Portamento

Cntrl#	parameter	Data Range
65	Portamento	0...127
		(0-63:off, 64-127:on)

When the Multi Part parameter Rcv PORTAMENTO = OFF, that Part will not receive Portamento messages.

1.2.10Sostenuto

Cntrl#	parameter	Data Range
66	Sostenuto	0...127
		(0-63:off, 64-127:on)

When the Multi Part parameter Rcv SOSTENUTO = OFF, that Part will not receive Sostenuto messages.

1.2.11Soft Pedal

Cntrl#	parameter	Data Range
67	Soft Pedal	0...127
		(0-63:off, 64-127:on)

When the Multi Part parameter Rcv SOFT PEDAL= OFF, that Part will not receive Soft Pedal messages.

1.2.12Harmonic Content

Cntrl#	parameter	Data Range
71	Harmonic Content	0...127

(0:-64, 64:+0, 127:+63)

This message adjusts the resonance specified by the voice data. Since this is a relative change parameter,

specify the increase or decrease relative to a center value of 64. Higher values will result in a more characteristic sound.

Depending on the voice, the range of effect may be narrower than the range available for setting.

1.2.13Release Time

Cntrl#	parameter	Data Range
72	Release Time	0...127

(0:-64, 64:+0, 127:+63)

This message adjusts the envelope release time specified by the voice data. Since this is a relative change parameter,

specify an increase or decrease relative to a center value of 64.

1.2.14Attack Time

Cntrl#	parameter	Data Range
73	Attack Time	0...127

(0:-64, 64:+0, 127:+63)

This message adjusts the envelope attack time specified by the voice data. Since this is a relative change parameter,

specify an increase or decrease relative to a central value of 64.

1.2.15Brightness

Cntrl#	parameter	Data Range
74	Brightness	0...127

(0:-64, 64:+0, 127:+63)

This message adjusts the cutoff frequency specified by the voice data. Since this is a relative change parameter,

specify an increase or decrease relative to a central value of 64. Lower values will result in a softer sound.

For some voices, the range of effect may be narrower than the range available for adjustment.

1.2.16Portamento Control

Cntrl#	parameter	Data Range
84	Portamento Control 0...127

Portamento Control is transmitted specifying the Note On Key of currently-sounding note.

Specify a Portamento Source Key number of 0~127. When a Portamento Control message is received,

the currently sounding pitch will change with a Portamento Time of 0 to the key of the next-received Note On on the same channel.

This message is received even if Rcv PORTAMENTO = OFF

1.2.17Effect1 Depth ( Reverb Send Level )

Cntrl#	parameter	Data Range
91	Effect1 Depth	0...127

This message sets the send level for the reverb effect.

1.2.18Effect3 Depth ( Chorus Send Level )

Cntrl#	parameter	Data Range
93	Effect3 Depth	0...127

This message sets the send level for the chorus effect.

10

MU50 MIDI Data Format

1.2.19Effect4 Depth ( Variation Effect Send Level )

Cntrl#	parameter	Data Range
94	Effect4 Depth	0...127(when Variation Connection = 1 (System))

This message sets the send level for the Variation effect.

If Variation Connection = 0(Insertion), this has no effect.

1.2.20Data Increment / Decrement (for RPN)

Cntrl#	parameter	Data Range
96	RPN Increment	0...127
97	RPN Decrement	0...127

The data byte is ignored.

These messages increase or decrease the MSB value of Pitch Bend Sensitivity, Fine Tune, or Coarse Tune in steps of 1.

When the maximum value or minimum value is reached, the value will not be incremented or decremented further.

(Incrementing the Fine Tune will not cause the Coarse Tune to be stepped up.)

1.2.21NRPN (Non-Registered Parameter Number)

Cntrl#	parameter	Data Range
98	NRPN LSB	0...127
99	NRPN MSB	0...127

When the Multi Part parameter Rcv NRPN = OFF, that Part will not receive NRPN messages.

First send the NRPN MSB and NRPN LSB to specify the parameter which is to be controlled. Then

use Data Entry to set the value of the specified parameter.

The following NRPN numbers can be received.

NRPN		Data entry
MSB LSB		MSB	Parameter name and value range
$01	$08	$mm	Vibrato Rate
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$01	$09	$mm	Vibrato Depth
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$01	$0A	$mm	Vibrato Delay
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$01	$20	$mm	Filter Cutoff Frequency
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$01	$21	$mm	Filter Resonance
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$01	$63	$mm	EG Attack Time
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$01	$64	$mm	EG Decay Time
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$01	$66	$mm	EG Release Time
			mm : $00 - $40 - $7F (-64 - 0 - +63)
$14	$rr	$mm	Drum Filter Cutoff Frequency
			mm : $00 - $40 - $7F (-64 - 0 - +63)
			rr : drum instrument note number
$15	$rr	$mm	Drum Filter Resonance
			mm : $00 - $40 - $7F (-64 - 0 - +63)
			rr : drum instrument note number
$16	$rr	$mm	Drum EG Attack Rate
			mm : $00 - $40 - $7F (-64 - 0 - +63)
			rr : drum instrument note number
$17	$rr	$mm	Drum EG Decay Rate
			mm : $00 - $40 - $7F (-64 - 0 - +63)
			rr : drum instrument note number
			Applies to both Decay1 and 2.
$18	$rr	$mm	Drum Instrument Pitch Coarse
			mm : $00 - $40 - $7F (-64 - 0 - +63)
			rr : drum instrument note number
$19	$rr	$mm	Drum Instrument Pitch Fine
			mm : $00 - $40 - $7F (-64 - 0 - +63)
			rr : drum instrument note number
$1A	$rr	$mm	Drum Instrument Level
			mm : $00 - $7F (0 - max)
			rr : drum instrument note number

$1C	$rr	$mm	Drum Instrument Pan
			mm : $00	- $40 - $7F (random, left - center - right)
			rr : drum instrument note number
$1D	$rr	$mm	Drum Instrument Reverb Send Level
			mm : $00	- $7F (0 - max)
			rr : drum instrument note number
$1E	$rr	$mm	Drum Instrument Chorus Send Level
			mm : $00	- $7F (0 - max)
			rr : drum instrument note number
$1F	$rr	$mm	Drum Instrument Variation Send Level
			mm : $00	- $7F (0 - max)
			rr : drum instrument note number

MSB 14h-1Fh(for Drum)is valid only when that channel is in Drum mode and Drum Setup 1 or 2 is selected.

1.2.22RPN (Registered Parameter Number)

Cntrl#	parameter	Data Range
100	RPN LSB	0...127
101	RPN MSB	0...127

Default:7F 7FH

When the Multi Part parameter Rcv RPN = OFF, that Part will not receive these messages.

The following RPN numbers can be received.

RPN		Data entry
MSB LSB		MSB LSB	Parameter name and value range
00H	00H	mmH —	Pitch Bend Sensitivity
			mm:00-18H(0-2 chromatic steps)
			Settable in chromatic steps up to 2 octaves
			Default:02H
			LSB value is ignored.
00H	01H	mmH 11H	Fine Tuning
			mm:00H-40H-7FH(-64-0-+63)
00H	02H	mmH —	Coarse Tuning
			mm:28H - 40H - 58H(-24 - +24 chromatic steps)
			LSB value is ignored.
7FH	7FH	— —	RPN null

Set condition in which RPN and NRPN numbers are not specified.

Internally set values are not affected.

1.2.23Channel Mode Messages

The following Channel Mode Messages are received.

2nd byte	3rd byte
120	0	All Sound Off
121	0	Reset All Controllers
123	0	All Note Off
124	0	Omni Off
125	0	Omni On
126	0 ~ 16	Mono
127	0	Poly

1.2.23.1 All Sound Off

Turn off all sounds currently sounding on the specified channel.

However the status of channel messages such as Note On and Hold On is maintained.

1.2.23.2 Reset All Controllers

The values of the following controllers will change.

Controller	Value
Pitch Bend	± 0 (center)
Channel Pressure	0 (off)
Polyphonic Key Pressure	0 (off)
Modulation	0 (off)
Expression	127 (max)
Hold	0 (off)
Portamento	0 (off)
Sostenuto	0 (off)
Soft Pedal	0 (off)
Portamento Control	resets the Portamento Source Note
	Number that was received
RPN	number not specified; internal data
	will not change
NRPN	number not specified; internal data
	will not change

11

MU50 MIDI Data Format

1.2.23.3 All Note Off

This message turns off all notes currently on for the specified channel.

However if Hold 1 or Sostenuto are on, notes will continue sounding until these are turned off.

1.2.23.4 Omni Off

Perform the same processing as when All Note Off is received.

1.2.23.5 Omni On

Perform the same processing as when All Note Off is received.

1.2.23.6 Mono

Perform the same processing as when All Sound Off is received, and if the 3rd byte (mono number) is in the range of 0~16,

set the applicable channel to Mode 4 (m = 1).

1.2.23.7 Poly

Perform the same processing as when All Sound Off is received, and set the applicable channel to Mode 3.

1.3Program Change

If the Multi Part parameter Rcv PROGRAM CHANGE = OFF, that Part will not receive Program Changes.

If Sound Module Mode = C/M, all Program Changes for the Drum Voice Part are ignored.

1.4Pitch Bend

If the Multi Part parameter Rcv PITCH BEND CHANGE = OFF, that Part will not receive Pitch Bend messages.

1.5Channel Aftertouch

With the default setting there will be no function.

If the Multi Part parameter Rcv CHANNEL AFTER TOUCH = OFF, that Part will not receive Channel Aftertouch.

1.6Polyphonic Aftertouch

With the default setting there will be no function.

If the Multi Part parameter Rcv POLYPHONIC AFTER TOUCH = OFF, that Part will not receive Polyphonic Aftertouch.

There will be an effect only for note numbers 36-97.

2. System Exclusive Messages

2.1Parameter Changes

This device uses the following parameter changes.

[ UNIVERSAL REALTIME MESSAGE ]

1) Master Volume

[ UNIVERSAL NON REALTIME MESSAGE ]

1)General MIDI Mode On

2)Identity Request(INQUIRY MESSAGE)

3)Identity Reply(INQUIRY MESSAGE)

[ XG NATIVE ]

1)XG System on

2)XG System Data parameter change

3)System Information

4)Multi Effect1 Data parameter change

5)Display Data parameter change

6)Multi Part Data parameter change

7)Drums Setup Data parameter change

[ MU80, MU50 NATIVE ]

1)MU80, MU50 System data parameter change

2)Current Performance parameter change

3)Remote switch

[ Other ]

1)Master tuning

2)TG300 System Data Parameter change

3)TG300 Multi Effect Data parameter change

4)TG300 Mutli Part Data parameter change

5)Disk Orchestra On

2.1.2Universal Realtime Messages

2.1.2.1Master Volume

11110000	F0	= Exclusive status
01111111	7F	= Universal Real Time
01111111	7F	= ID of target device
00000100	04	= Sub-ID #1=Device Control Message
00000001	01	= Sub-ID #2=Master Volume
0sssssss	*SS	= Volume LSB
0ttttttt	TT	= Volume MSB
11110111	F7	= End of Exclusive
or,
11110000	F0	= Exclusive status
01111111	7F	= Universal Real Time
0xxxnnnn	XN	= Device Number, xxx = don’t care
00000100	04	= Sub-ID #1=Device Control Message
00000001	01	= Sub-ID #2=Master Volume
0sssssss	SS	= Volume LSB
0ttttttt	TT	= Volume MSB
11110111	F7	= End of Exclusive

When this is received, the Volume MSB will be reflected in the System Parameter MASTER VOLUME.

*SS is the hex expression of 0sssssss Same for others

2.1.3Universal Non-Realtime Messages

2.1.3.1General MIDI Mode On

11110000	F0	= Exclusive status
01111110	7E	= Universal Non-Real Time
01111111	7F	= ID of target device
00001001	09	= Sub-ID #1=General MIDI Message
00000001	01	= Sub-ID #2=General MIDI On
11110111	F7	= End of Exclusive
or,
11110000	F0	= Exclusive status
01111110	7E	= Universal Non-Real Time
0xxxnnnn	XN	= Device Number, xxx = don’t care
00001001	09	= Sub-ID #1=General MIDI Message
00000001	01	= Sub-ID #2=General MIDI On
11110111	F7	= End of Exclusive

When On is received, the SOUND MODULE MODE will be changed to XG mode. Ignored when in C/M mode.

Not received when Rcv GM EXCLUSIVE = OFF

Since approximately 50 ms is required to execute this message, leave an appropriate interval before the message that follows it.

2.1.3.2Identity Request

11110000	F0	= Exclusive status
01111110	7E	= Universal Non-Real Time
0ccccccc	ccccccc	= Device Number
00000110	06	= General Information
00000001	01	= Identity Request(Sub-ID #2)
11110111	F7	= End of Exclusive

When this message is received, this device will transmit the following 2.1.3.3 Identity Reply message.

2.1.3.3 Identity Reply

11110000	F0	=Exclusive status
11111110	7E	=Universal Non-Real Time
0nnnnnnn	0nnnnnnn	=Device Number
00000110	06	=General Information(Sub-ID #1)
00000010	02	=Device Identity Reply(Sub-ID #2)
01000011	43	=YAMAHA ID
00000000	00	=Device Family Code LSB	MU50ID#1
01000001	41	=Device Family Code MSB	MU50ID#2
01000110	46	=Device Number Code LSB	MU50ID#3
00000001	01	=Device Number Code MSB	MU50ID#4
00000000	00
00000000	00
00000000	00
00000000	01	=XG ID
11110111	F7	=End of Exclusive

This device transmits this message when it receives a 2.1.3.2 Identity Request message.

12

MU50 MIDI Data Format

2.1.4XG Native Parameter Change

11110000	F0	Exclusive status
01000011	43	YAMAHA ID
0001nnnn	1n	device Number
01001100	4C	XG Model ID
0aaaaaaa	aaaaaaa	Address High
0aaaaaaa	aaaaaaa	Address Mid
0aaaaaaa	aaaaaaa	Address Low
0ddddddd	ddddddd	Data
|	|
11110111	F7	End of Exclusive

For parameters whose data size is 2 or 4, transmit the appropriate number of data bytes.

2.1.4.1XG Sytem On

11110000	F0	Exclusive status
01000011	43	YAMAHA ID
0001nnnn	1N	device Number
01001100	4C	XG Model ID
0aaaaaaa	00	Address High
0aaaaaaa	00	Address Mid
0aaaaaaa	7E	Address Low
00000000	00	Data
11110111	F7	End of Exclusive

When On is received, the SOUND MODULE MODE will change to XG.

Since approximately 50 ms is required to execute this message, leave an appropriate interval before

the message that follows it.

2.1.4.2XG System Data parameter change

Refer to tables <1-1> and <1-2>.

2.1.4.3System Information

Data transmission is performed in response to a Dump Request, but data reception is ignored.

Refer to tables <1-1> and <1-3>.

2.1.4.4Multi Effect1 Data parameter change

Refer to tables <1-1> and <1-4>.

2.1.4.5Display Data parameter change

Refer to tables <1-1> and <1-5>.

2.1.4.6Multi Part Data parameter change

Refer to tables <1-1> and <1-6>.

2.1.4.7Drums Setup Data parameter change

Refer to tables <1-1> and <1-7>.

If a DRUM SETUP RESET parameter change is received while in XG mode, the Drum Setup parameter values will be initialized.

In any mode, selecting a Drum Set will cause the Drum Setup parameter values to be initialized.

2.1.5MU80, MU50 native parameter change

11110000	F0	Exclusive status
01000011	43	YAMAHA ID
0001nnnn	1n	device Number
01001001	49	MU80, MU50 Model ID
0aaaaaaa	aaaaaaa	Address High
0aaaaaaa	aaaaaaa	Address Mid
0aaaaaaa	aaaaaaa	Address Low
0ddddddd	ddddddd	Data
|	|
11110111	F7	End of Exclusive

For parameters with a data size of 2 or 4, transmit the appropriate number of data bytes.

2.1.5.1MU80, MU50 System Data parameter change

Refer to tables <2-1> and <2-2>.

2.1.5.2Current Performance parameter change

Refer to tables <2-1> and <2-3>.

2.1.5.3Remote Switch

Refer to tables <2-1> and <2-4>.

2.1.6Other parameter changes

2.1.6.1Master Tuning

11110000	F0	Exclusive status
01000011	43	YAMAHA ID
0001nnnn	1n	device Number
00100111	27	Model ID
00000001	30	Sub ID2
00000000	00
00000000	00
0mmmmmmm	mm	Master Tune MSB
0lllllll	ll	Master Tune LSB
0ccccccc	cc
11110111	F7	End of Exclusive

This message simultaneously changes the pitch of all channels.

2.1.6.2Disk Orchestra On

11110000 F0

01000011 43

01110011 73

00000001 01

00010100 14

11110111 F7

This message sets the SOUND MODULE MODE of this device to DOC MODE.

2.2Bulk Dump

This device handles the following bulk dump data.

[ XG NATIVE ]

1)XG System Data

2)Multi Effect1 Data

3)Multi Part Data

4)Drums Setup Data

[ MU80, MU50 NATIVE ]

1)MU80, MU50 System data

2)Internal Performance

2.2.1XG Native Bulk Dump

11110000	F0	Exclusive status
01000011	43	YAMAHA ID
0000nnnn	0n	device Number
01001100	4C	XG Model ID
0bbbbbbb	bbbbbbb	ByteCount
0bbbbbbb	bbbbbbb	ByteCount
0aaaaaaa	aaaaaaa	Address High
0aaaaaaa	aaaaaaa	Address Mid
0aaaaaaa	aaaaaaa	Address Low
00000000	00	Data
|	|
|	|
0ccccccc	ccccccc	Check-sum
11110111	F7	End of Exclusive

For the Address and Byte Count, refer to the supplementary tables.

The Check Sum is the value that results in a value of zero for the lower 7 bits when the Start Address, Byte Count, and the Check Sum itself are added.

No more than 512 bytes shall be transmitted at one time. If one of the above Dump Request messages for 513 bytes or more is received,

the data will be divided into appropriate packets of 512 bytes or less, and transmitted at appropriate intervals (of at least 120 msec).

2.2.1.1XG System Data bulk dump

Refer to tables <1-1> and <1-2>.

2.2.1.2Multi Effect1 Data bulk dump

Refer to tables <1-1> and <1-4>.

2.2.1.3Multi Part Data bulk dump

Refer to tables <1-1> and <1-6>.

2.2.1.4Drums Setup Data bulk dump

Refer to tables <1-1> and <1-7>.

13