HTR-5860
HTR-5860
AV Receive r
U
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, wi thin an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
1 Read Instructions – All the safety and operating instructions
should be read before the product is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and use instructions
should be followed.
5 Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6 Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7 Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
8 Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
9 A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the product and cart
combination to overturn.
10 Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
11 Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
12 Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
13 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
14 Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
15 Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
16 Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
17 Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
18 Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19 Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
i
IMPORTANT SAFETY INSTRUCTIONS
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f) When the product exhibits a distinct change in perfor-
mance - this indicates a need for service.
20 Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
21 Safety Check – Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
22 Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
23 Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
24 Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
MAST
GROUND
CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will
not result in harmful interference with other electronic
devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions found
in the users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
ii
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this sound system in a well ventilated, cool,
dry, clean place – away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
Allow ventilation space of at least 30 cm on the top,
20 cm on the left and right, and 20 cm on the back of
this unit.
3 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4 Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate this unit
in a environment with high humidity (i.e. a room with
a humidifier) to prevent condensation inside this
unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign object may
fall onto this unit and/or this unit may be exposed to
liquid dripping or splashing. On the top of this unit,
do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause
fire, damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall
and liquid may cause electrical shock to the user
and/or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If
the temperature inside this unit rises, it may cause
fire, damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with a higher voltage than specified
is dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from use
of this unit with a voltage other than specified.
13 To prevent damage by lightning, disconnect the
power cord and outdoor antenna from the wall outlet
during an electrical storm.
14 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reasons.
15 When not planning to use this unit for long periods
of time (i.e. vacation), disconnect the AC power plug
from the wall outlet.
16 Be sure to read the “TROUBLESHOOTING” section
on common operating errors before concluding that
this unit is faulty.
17 Before moving this unit, press STANDBY/ON to set
this unit in the standby mode, and disconnect the
AC power plug from the wall outlet.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if this unit itself is turned off. This state is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through
loud and clear without annoying blaring or distortion – and, most
importantly, without affecting your sensitive hearing.
iii
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
CONTENTS
INTRODUCTION
FEATURES ............................................................. 2
GETTING STARTED............................................ 3
Supplied accessories.................................................. 3
Installing batteries in the remote control...................3
CONTROLS AND FUNCTIONS ......................... 4
Front panel.................................................................4
Remote control...........................................................6
Using the remote control ........................................... 7
Front panel display .................................................... 8
Rear panel................................................................10
PREPARATION
SPEAKER SETUP ............................................... 11
Speaker placement................................................... 11
Speaker connections................................................ 12
CONNECTIONS .................................................. 15
Before connecting components................................15
Connecting video components................................. 16
Connecting audio components.................................19
Connecting the FM and AM antennas.....................21
Connecting the power supply cord .......................... 22
Speaker impedance setting ......................................22
Turning on the power...............................................23
AUTO SETUP....................................................... 24
Introduction..............................................................24
Optimizer microphone setup....................................24
Starting the setup.....................................................25
BASIC OPERATION
PLAYBACK.......................................................... 30
Basic operations....................................................... 30
Selecting sound field programs ...............................32
Selecting input modes.............................................. 36
FM/AM TUNING ................................................. 38
Automatic and manual tuning..................................38
Presetting stations.................................................... 39
Selecting preset stations...........................................41
Exchanging preset stations ......................................42
XM Satellite Radio TUNING .............................. 44
What is XM Satellite Radio? ................................... 44
XM Satellite Radio connections .............................. 44
XM Satellite Radio functions..................................45
Activating XM Satellite Radio................................46
Basic XM Satellite Radio operations.......................47
XM Satellite Radio search modes............................ 48
Setting XM Satellite Radio preset channels............ 51
RECORDING ....................................................... 54
SOUND FIELD PROGRAMS
SOUND FIELD PROGRAM DESCRIPTIONS 55
For movie/video sources..........................................55
For music sources....................................................57
ADVANCED OPERATION
ADVANCED OPERATIONS ..............................58
Selecting the OSD mode.......................................... 58
Using the sleep timer...............................................58
Manually adjusting speaker levels........................... 59
SET MENU ............................................................60
Using SET MENU................................................... 62
1 SOUND MENU.................................................... 63
2 INPUT MENU......................................................68
3 OPTION MENU................................................... 70
ADVANCED SETUP MENU ...............................72
REMOTE CONTROL FEATURES ...................74
Control area ............................................................. 74
Setting remote control codes ................................... 75
Controlling other components .................................76
Switching library codes........................................... 77
Clearing set up remote control codes.......................77
ADDITIONAL INFORMATION
EDITING SOUND FIELD PARAMETERS ......78
What is a sound field............................................... 78
Changing parameter settings ...................................78
SOUND FIELD PARAMETER
DESCRIPTIONS...............................................80
TROUBLESHOOTING .......................................85
RESETTING THE FACTORY PRESETS ........90
GLOSSARY...........................................................91
Audio formats.......................................................... 91
Sound field programs............................................... 92
Audio information ................................................... 92
Video signal information......................................... 93
SPECIFICATIONS...............................................94
PREPARATIONINTRODUCTION
OPERATION
BASIC
SOUND FIELD
PROGRAMS
OPERATION
ADVANCED
INFORMATION
ADDITIONAL
1
FEATURES
FEATURES
Built-in 7-channel power amplifier
◆ Minimum RMS output power
(0.06% THD, 20 Hz to 20 kHz, 8 Ω)
Front: 95 W + 95 W
Center: 95 W
Surround: 95 W + 95 W
Surround back: 95 W + 95 W
XM Satellite Radio
◆ XM Satellite Radio programming (using the “XM
Connect and Play digital antenna accessory”, sold
separately)
Other features
◆ YPAO: YAMAHA Parametric Room Acoustic
Optimizer for automatic speaker setup
Sound field features
◆ Proprietary YAMAHA technology for the creation of
sound fields
◆ Dolby Digital/Dolby Digital EX decoder
◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6,
DTS 96/24 decoder
◆ Dolby Pro Logic/Dolby Pro Logic II/
Dolby Pro Logic IIx decoder
◆ Virtual CINEMA DSP
◆ SILENT CINEMA
™
Sophisticated AM/FM tuner
◆ 40-station random and direct preset tuning
◆ Automatic preset tuning
◆ Preset station shifting capability (preset editing)
◆ 192-kHz/24-bit D/A converter
◆ A SET MENU that provides you with items for
optimizing this unit for your audio/video system
◆ 8 additional input jacks for discrete multi-channel input
◆ PURE DIRECT for pure fidelity sound with analog and
PCM sources
◆ On-screen display function helpful in controlling this
unit
◆ S-video signal input/output capability
◆ Component video input/output capability
◆ Video signal conversion (Composite video ↔ S-video
→ Component video) capability for monitor out
◆ Optical and coaxial digital audio signal jacks
◆ Sleep timer
◆ Cinema and music night listening modes
◆ Remote control with preset remote control codes
• y indicates a tip for your operation.
• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button
names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and product, the product has priority.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol
are trademarks of Dolby Laboratories.
“SILENT CINEMA” is a trademark of YAMAHA
CORPORATION.
2
“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of
Digital Theater Systems, Inc.
The XM name and related logos are registered trademarks of XM
Satellite Radio Inc.
GETTING STARTED
GETTING STARTED
Supplied accessories
Please check that you received all of the following parts.
Remote control
TRANSMITCODE SET
SYSTEM
POWERPOWER
STANDBY
POWER
AVTV
CD MD/CD-R
TUNER
SLEEP
DTV/CBL
V-AUXDVD
MULTI CH IN
VCR 1 DVR/VCR2
TV VOL TV CH
TV MUTE TV INPUT
STANDARD
SPEAKERS
AB
LEVEL
BAND SRCH MODE
A-E/CAT. A-E/CAT.
MEMORY ON SCREEN
REC
DISC SKIP
AMP
VOLUME
MUTE
MOVIE
ENTERTAIN
MUSICSTEREO
4321
PURE DIRECT
EXTD SUR.
SELECT
81070965
STRAIGHT
NIGHT
ENT.
EFFECT
PRESET/CH
SET MENU
FAVOR.
MENUTITLE
ENTER
DISPLAYRETURN
AUDIO
Batteries (4)
(AAA, R03, UM-4)
Indoor FM antenna
Installing batteries in the remote
control
2
1
3
AM loop antenna
Optimizer microphone
Notes on batteries
• Change all of the batteries if you notice the following
conditions; the operation range of the remote control decreases,
the indicator does not flash or its light becomes dim.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throw away batteries with general house waste; dispose
of them correctly in accordance with your local regulations.
INTRODUCTION
1 Press the part and slide the battery
compartment cover off.
2
Insert four supplied batteries (AAA, R03,
UM-4) according to the polarity markings
(+ / –) on the inside of the battery
compartment.
3 Slide the cover back until it snaps into place.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the remote control code and program
any acquired functions that may have been cleared.
3
CONTROLS AND FUNCTIONS
Front panel
CONTROLS AND FUNCTIONS
1
B
STANDBY
/ON
OPTIMIZER
MIC
PHONES
SILENT CINEMA
PURE DIRECT
SPEAKERS
A B
D
3
SEARCH MODE
E
4
526
PRESET/TUNING
FM/AM
XM
EDIT
PROGRAM INPUT
STRAIGHT
EFFECT
FC
CATEGORY
7
A/B/C/D/E
TONE CONTROL
G
1 STANDBY/ON
Turns on this unit or sets it to the standby mode. When you
turn on this unit, you will hear a click and there will be a 4
to 5-second delay before this unit can reproduce sound.
Note
In standby mode, this unit consumes a small amount of power in
order to receive infrared-signals from the remote control.
2 PURE DIRECT
Turns on or off PURE DIRECT mode (see page 34).
3 Remote control sensor
Receives signals from the remote control.
4 Front panel display
Shows information about the operational status of this
unit.
5 PRESET/TUNING (EDIT), SEARCH MODE
*
Switches the function of PRESET/TUNING/CH l / h
(LEVEL –/+) between selecting preset station numbers
and tuning.
6 FM/AM, XM
*
Switches the reception band when the unit is in tuner
mode.
8
9
0
A
(U.S.A. model)
VOLUME
PRESET/TUNING/CH
LEVELNEXT
+
INPUT MODE
H
7 A/B/C/D/E, NEXT, CATEGORY
MAN'L/AUTO FM
I
MEMORY
TUNING MODE
DISPLAY
AUTO/MAN'L MONO
MULTI CH
INPUT
J
VIDEO AUX
VIDEO
S VIDEO
OPTICALRAUDIOL
K
*
Selects one of the 5 preset station groups (A to E) when
the unit is in tuner mode.
Selects the speaker channel to be adjusted when the unit is
not in tuner mode.
*
8 PRESET/TUNING/ CH
l / h, LEVEL –/+
Selects preset station number 1 to 8 when the colon (:) is
displayed next to the band indication in the front panel
display when the unit is in tuner mode. Selects the tuning
frequency when the colon (:) is not displayed.
Adjusts the level of the speaker channel selected using
A/B/C/D/E (NEXT) when the unit is not in tuner mode.
9 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory. Hold down this button for
more than 3 seconds to start automatic preset tuning.
0 TUNING MODE (AUTO/MAN’L MONO),
DISPLAY
*
Switches the tuning mode between automatic (AUTO
indicator on) and manual (AUTO indicator off).
A VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
4
B OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for use with the AUTO SETUP function (see
page 24).
C PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with
headphones. When you connect headphones, no signals
are output to the PRE OUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down
to the left and right headphone channels.
D SPEAKERS A/B
Turns on or off the set of front speakers connected to the A
and/or B terminals on the rear panel each time the
corresponding button is pressed.
E STRAIGHT (EFFECT)
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
F PROGRAM
Use to select sound field programs or adjust the bass/treble
balance (in conjunction with TONE CONTROL).
CONTROLS AND FUNCTIONS
INTRODUCTION
G TONE CONTROL
Use to adjust the bass/treble balance for the front left and
right, center, presence and subwoofer channels (see
pages 31).
H INPUT MODE
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received when one component is connected to two
or more of this unit’s input jacks (see page 36).
I INPUT selector
Selects the input source you want to listen to or watch.
J MULTI CH INPUT
Selects the source connected to the MULTI CH INPUT
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with INPUT (or the input
selector buttons on the remote control).
K VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console. To reproduce source
signals from these jacks, select V-AUX as the input
source.
*
Available only when the unit is in the XM Satellite Radio
mode (see page 45).
5
CONTROLS AND FUNCTIONS
Remote control
This section describes the function of each control on the
remote control used to control this unit. To operate other
components, see “REMOTE CONTROL FEATURES” on
page 74.
1
2
POWERPOWER
AVTV
CD MD/CD-R
TRANSMITCODE SET
STANDBY
TUNER
SYSTEM
POWER
SLEEP
9
0
A
B
V-AU XDVD
3
DTV/CBL
VCR 1 DVR/VCR2
MULTI CH IN
C
AMP
D
E
65
09
ENTERTAIN
EXTD SUR.
PRESET/CH
ENTER
NIGHT
VOLUME
7
10
MUTE
MOVIE
4321
PURE DIRECT
8
STRAIGHT
ENT.
EFFECT
SET MENU
MENUTITLE
DISPLAYRETURN
AUDIO
F
G
H
I
4
5
6
7
8
TV VOL TV CH
TV MUTE TV INPUT
MUSICSTEREO
STANDARD
SELECT
SPEAKERS
AB
LEVEL
BAND SRCH MODE
A-E/CAT. A-E/CAT.
MEMORY ON SCREEN
REC
DISC SKIP
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 CODE SET
Use to set up remote control codes (see page 75).
3 Input selector buttons
Select the input source and change the control area.
4 Sound field program/numeric buttons
Use to select sound field programs.
Use numbers 1 through 8 to select preset stations when the
unit is in tuner mode.
Use SELECT to playback 2-channel sources in multiple
channel format (see page 33).
Use EXTD SUR. to switch between 5.1 or 6.1/7.1-channel
playback of multi-channel software (see page 33).
Use PURE DIRECT to turn on or off PURE DIRECT
mode (see page 34).
5 SPEAKERS A/B
Use to turn on or off the set of front speakers connected to
the A and/or B terminal on the rear panel each time the
corresponding button is pressed.
6 LEVEL, BAND
Selects the speaker channel to be adjusted and sets the
level.
Switches the reception band when the unit is in tuner
mode.
7 Cursor buttons u / d / j / i /ENTER
Use to select and adjust sound field program parameters or
SET MENU items.
Press j / i to select a preset station group (A to E) when
the unit is in tuner mode.
Press u / d to select a preset station number (1 to 8)
when the unit is in tuner mode.
8 RETURN, MEMORY
*
Returns to the previous menu level when adjusting the
SET MENU parameters.
9 TRANSMIT indicator
Flashes while the remote control is sending signals.
0 STANDBY
Sets this unit in the standby mode.
A SYSTEM POWER
Turns on the power of this unit.
6
B SLEEP
Sets the sleep timer.
CONTROLS AND FUNCTIONS
Using the remote control
C MULTI CH IN
Selects multi-channel input when using an external
decoder (etc.).
D AMP
Selects the AMP mode. You must select the AMP mode to
control the main unit.
E VOLUME +/–
Increases or decreases the volume level.
F MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level.
G NIGHT
Turns on or off the night listening modes (see page 35).
H STRAIGHT (EFFECT), ENT.
*
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
I SET MENU, SRCH MODE
*
Activates the SET MENU function.
*
Available only when the unit is in the XM Satellite Radio
mode (see page 45).
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
PURE DIRECT
STANDBY
/ON
OPTIMIZER
MIC
PHONES
SILENT CINEMA
PRESET/TUNING
FM/AM
A/B/C/D/E
PRESET/TUNING/CH
XM
SEARCH MODE
EDIT
SPEAKERS
A B
PROGRAM INPUT
STRAIGHT
EFFECT
EFFECT
MEMORY
CATEGORY
MAN'L/AUTO FM
LEVELNEXT
+
INPUT MODE
TONE CONTROL
30 30
TRANSMITCODE SET
SYSTEM
POWERPOWER
STANDBY
POWER
AVTV
CD
MD/CD-R
TUNER
SLEEP
DTV/CBL
V-AUX
DVD
MULTI CH IN
VCR 1DVR/VCR2
AMP
VOLUME
TV VOL TV CH
TV MUTE TV INPUT
MUTE
STEREO
ENTERTAIN
MUSIC
MOVIE
4321
PURE DIRECT
EXTD SUR.STANDARD
SELECT
8
70965
SPEAKERS
NIGHT
STRAIGHT
AB
ENT.
10
EFFECT
PRESET/CH
LEVEL
SET MENU
MENUTITLE
BAND
SRCH MODE
ENTER
A-E/CAT. A-E/CAT.
DISPLAYRETURN
MEMORY ON SCREEN
REC
AUDIO
DISC SKIP
VOLUME
TUNING MODE
DISPLAY
AUTO/MAN'L MONO
VIDEO AUX
MULTI CH
INPUT
OPTICALRAUDIOL
VIDEO
S VIDEO
Approximately 6 m (20 ft)
■ Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– places of high humidity, such as near a bath
– high temperature, such as near a heater or stove
– extremely low temperatures
– dusty places
INTRODUCTION
7
CONTROLS AND FUNCTIONS
PS
HOLD
RT CT
EON
PTY
PTY
Front panel display
123456789 A B C0
t
MATRIX DISCRETE
q
DIGITAL
q
q
EX
q
PL
q
PCM
PL x
PL
96
24
DVR/VCR2
VIRTUAL
STANDARD
NIGHT
V-A UX
SP
A B
G
VCR1
SILENT CINEMA
FH
DTV/CBL
1 Decoder indicators
When any of this unit’s decoders function, the respective
indicator lights up.
2 VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active (see
page 35).
3 SILENT CINEMA indicator
Lights up when headphones are connected and a sound
field program is selected (see page 31).
4 Input source indicators
A cursor lights to show the current input source.
5 Sound field indicators
Light to indicate the active DSP sound fields.
Presence DSP sound field
Listening position
Left surround
DSP sound field
Surround back DSP sound field
Right surround
DSP sound field
6 CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound field
program.
7 YPAO indicator
Lights up during the auto setup procedure and when the
auto setup speaker settings are used without any
modifications.
8 AUTO indicator
Lights up when this unit is in automatic tuning mode.
9 TUNED indicator
Lights up when this unit is tuned into a station.
YPAO
MD/CD-R
AUTO
PTY
HOLD
TUNED STEREO MUTE
PS
RT CT
PTY
EON
MEMORY
SLEEP
mS
dB
ft
KNLED
96/24
LFE
DVD
HiFi DSP
IJ M
0 STEREO indicator
Lights up when this unit is receiving a strong signal for an
FM stereo broadcast while the AUTO indicator is lit.
A MEMORY indicator
Flashes to show that a station can be stored.
B MUTE indicator
Flashes while the MUTE function is on.
C VOLUME level indication
Indicates the current volume level.
D PCM indicator
Lights up when this unit is reproducing PCM (Pulse Code
Modulation) digital audio signals.
E STANDARD
Lights up when Surround Standard or Surround Enhanced
is selected (see page 33).
F NIGHT indicator
Lights up when you select night listening mode.
G SP A B indicators
Light up according to the set of front speakers selected.
Both indicators light up when both sets of speakers are
selected.
H Headphones indicator
Lights up when headphones are connected.
I HiFi DSP indicator
Lights up when you select a HiFi DSP sound field
program.
J Multi-information display
Shows the current sound field program name and other
information when adjusting or changing settings.
PHONOCDTUNER
VOLUME
dB
LCR
SL SB SR
8
K SLEEP indicator
Lights up while the sleep timer is on.
CONTROLS AND FUNCTIONS
L 96/24 indicator
Lights up when a DTS 96/24 signal is input to this unit.
M LFE indicator
Lights up when the input signal contains the LFE signal.
N Input channel indicators
Indicate the channel components of the current digital
input signal.
INTRODUCTION
9
CONTROLS AND FUNCTIONS
Rear panel
12 4 586
DIGITAL
OUTPUT
MD/CD-R
OPTICAL
MD/CD-R
DVD
SURROUND
DTV/CBL
SURROUND
CD
DVD
COAXIAL
DIGITAL
INPUT
CD
(PLAY)
MD/
CD-R
OUT
(REC)
FRONT
BACK
IN
SUB
WOOFER
MULTI CH INPUT
3
SYSTEM CONNECTOR
AUDIO AUDIO
CENTER
MONITOR OUT
VIDEO S VIDEO
DVD
DTV/
CBL
IN
VCR 1
OUT
IN
DVR/
VCR 2
OUT
VIDEO S VIDEO
VIDEO
COMPONENT VIDEO
DVD
DTV/
CBL
MONITOR
OUT
PR PB Y
FRONT
A
B
SURROUND
75Ω UNBAL.
FM
ANT
PRE OUT
CENTER SINGLE
SUB
SURROUND
WOOFER
BACK
FRONT
90 A B
1 DIGITAL OUTPUT jack
See page 19 for details.
2 Audio component jacks
See page 19 for connection information.
3 SYSTEM CONNECTOR jack
Use to connect a YAMAHA subwoofer equipped with a
SYSTEM CONNECTOR jack to this unit (see page 13).
7
TUNER
AM
ANT
GND
XM
AC OUTLETS
SWITCHED
PRESENCE
SPEAKERS
SURROUND
CENTER
8 AC OUTLET(S)
Use to supply power to your other A/V components (see
page 22).
9 DIGITAL INPUT jacks
See pages 16, 18 and 19 for details.
0 MULTI CH INPUT jacks
See page 17 for connection information.
SURROUND BACK
(U.S.A. model)
4 Video component jacks
See pages 16 and 18 for connection information.
5 Antenna terminals
See page 21 for connection information.
6 PRESENCE speaker terminals
See page 13 for connection information.
7 XM jack
See page 44 for connection information.
10
A PRE OUT jacks
See page 20 for connection information.
B Speaker terminals
See page 13 for connection information.
SPEAKER SETUP
Speaker placement
The speaker layout below shows the standard ITU-R*
speaker setting. You can use it to enjoy CINEMA DSP and
multi-channel audio sources.
*
ITU-R is the radio communication sector of the ITU
(International Telecommunication Union).
PL
FL
SL
SL
30 cm (12 in) or more
SBL
C
30˚
60˚
80˚
SBR
PR
FR
SR
SR
SPEAKER SETUP
Surround speakers (SR and SL)
The surround speakers are used for effect and surround
sounds. Place these speakers behind your listening
position, facing slightly inwards, about 1.8 m (6 ft) above
the floor.
Surround back speakers (SBR and SBL)
The surround back speakers supplement the surround
speakers and provide for more realistic front-to-back
transitions. Place these speakers directly behind the
listening position and at the same height as the surround
speakers. They should be positioned at least 30 cm (12 in)
apart. Ideally, they should be positioned at the same width
as the front speakers.
Subwoofer
The use of a subwoofer, such as the YAMAHA Active
Servo Processing Subwoofer System, is effective not only
for reinforcing bass frequencies from any or all channels,
but also for high fidelity reproduction of the LFE (lowfrequency effect) channel included in Dolby Digital and
DTS software. The position of the subwoofer is not so
critical, because low bass sounds are not highly
directional. But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of the
room to reduce wall reflections.
PREPARATION
1.8 m (6 ft)
1.8 m (6 ft)
Front speakers (FR and FL)
The front speakers are used for the main source sound plus
effect sounds. Place these speakers an equal distance from
the ideal listening position. The distance of each speaker
from each side of the video monitor should be the same.
Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). If for some reason it is not practical
to use a center speaker, you can do without it. Best results,
however, are obtained with the full system. Align the front
face of the center speaker with the front face of your video
monitor. Place the speaker centrally between the front
speakers and as close to the monitor as possible, such as
directly over or under it.
Presence speakers (PR and PL)
Presence speakers supplement the sound from the front
speakers with extra ambient effects produced by CINEMA
DSP (see page 55). These effects include sounds that
filmmakers intend to locate a little farther back behind the
screen in order to create more theater-like ambience. Place
these speakers at the front of the room about 0.5 - 1 m
(1 - 3 ft) outside the front speakers, facing slightly
inwards, and about 1.8 m (6 ft) above the floor.
11
SPEAKER SETUP
Speaker connections
Be sure to connect the left channel (L), right channel (R),
“+” (red) and “–” (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the
polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.
CAUTION
• If you will use 4 or 6 ohm speakers, be sure to
set this unit’s speaker impedance setting to
4 ohms before using (see page 22).
• Before connecting the speakers, make sure that the
power of this unit is off.
• Do not let the bare speaker wires touch each other or do
not let them touch any metal part of this unit. This
could damage this unit and/or speakers.
• Use magnetically shielded speakers. If this type of
speakers still creates the interference with the monitor,
place the speakers away from the monitor.
A speaker cord is actually a pair of insulated cables
running side by side. One cable is colored or shaped
differently, perhaps with a stripe, groove or ridges.
Connect the striped (grooved, etc.) cable to the “+” (red)
terminals on this unit and your speaker. Connect the plain
cable to the “–” (black) terminals.
10 mm (3/8")
5 Tighten the knob to secure the wire.
3
4
5
Red: positive (+)
Black: negative (–)
■ Connecting to PRESENCE speaker
terminals
2
1
3
1 Open the tab.
2 Insert one bare wire into the hole of each
terminal.
12
1 Remove approximately 10 mm (3/8") of
insulation from the end of each speaker
cable.
2 Twist the exposed wires of the cable together
to prevent short circuits.
3 Unscrew the knob.
4 Insert one bare wire into the hole in the side
of each terminal.
3 Return the tab to secure the wire.
■ Banana plug connections
First, tighten the knob and then insert the banana plug
connector into the end of the corresponding terminal.
Banana plug
y
You can also use banana plugs with the PRESENCE speaker
terminals. Open the tab, then insert one banana plug connector
into the hole of each terminal. Do not attempt to close the tabs
after connecting the banana plugs.
12
SPEAKER SETUP
Subwoofer
system
Presence speakers
LeftRight
Surround speakers
LeftRight
SYSTEM CONNECTOR
1
A
B
6 7 10
23
PRESENCE
SPEAKERS
FRONT
Front
speakers
(B)
CENTER
Center
speaker
4 5
SURROUND
SURROUND BACK
98
LeftRight
Surround back
speakers
PREPARATION
LeftRight
Front speakers (A)
You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously.
• The surround back speakers output the surround back channel included in Dolby Digital EX and DTS-ES software and only
operate when the Dolby Digital EX, DTS-ES or Dolby Pro Logic IIx decoder is turned on.
• The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields
are selected.
13
SPEAKER SETUP
■ FRONT terminals
Connect one or two speaker systems (6, 7) to these
terminals. If you use only one speaker system, connect it
to the FRONT A or B terminals.
■ CENTER terminals
Connect a center speaker (8) to these terminals.
■ SURROUND terminals
Connect surround speakers (4, 5) to these terminals.
■ SURROUND BACK terminals
Connect surround back speakers (9, 10) to these terminals.
If you only connect one surround back speaker, connect it
to the left (L) terminals.
■ PRESENCE terminals
Connect presence speakers (2, 3) to these terminals.
■ SUBWOOFER PRE OUT jack
Connect a subwoofer with built-in amplifier (1), such as
the YAMAHA Active Servo Processing Subwoofer
System, to this jack.
■ SYSTEM CONNECTOR jack
Use this jack to control the power of your YAMAHA
subwoofer if a system connector jack is available on the
subwoofer.
3
2
6
8
7
Speaker layout
1
5
10
4
9
14
CONNECTIONS
Before connecting components
CAUTION
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
■ Cable indications
For analog signals
left analog cables
right analog cables
For digital signals
optical cables
coaxial cables
For video signals
video cables
S-video cables
component video cables
■ Analog jacks
You can input analog signals from audio components by
connecting audio pin cable to the analog jacks on this unit.
Connect red plugs to the right jacks and white plugs to the
left jacks.
■ Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
the input signals from the COAXIAL jack. All digital
input jacks are compatible with 96-kHz sampling digital
signals.
Note
This unit handles digital and analog signals independently. Thus
audio signals input to the analog jacks are only output to the
analog OUT (REC) jacks. Likewise audio signals input to the
digital (OPTICAL or COAXIAL) jacks are only output to the
DIGITAL OUTPUT jack.
L
R
O
C
V
S
PR
P
B
Y
CONNECTIONS
Dust protection cap
Pull out the cap from the optical jack before you connect
the fiber optic cable. Do not discard the cap. When you are
not using the optical jack, be sure to put the cap back in
place. This cap protects the jack from dust.
■ Video jacks
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input through the S VIDEO jacks on this unit
are automatically converted for output through the VIDEO
jacks. When VIDEO CONV. is set to ON (see page 70),
signals input through the VIDEO jacks can be output
through the S VIDEO and COMPONENT VIDEO jacks.
Likewise, signals input through the S VIDEO jacks can
also be output through the COMPONENT VIDEO jacks.
VIDEO
S VIDEO
VIDEO jacks
For conventional composite video signals.
S VIDEO jacks
For S-Video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (P
B, PR) to provide the best quality in
picture reproduction.
Signal flow inside this unit
Input
COMPONENT
VIDEO
S VIDEO
VIDEO
Only when VIDEO CONV. is set to ON
(see page 70).
Note
When signals are input through both the S VIDEO and VIDEO
jacks, signals input through the S VIDEO jack have priority.
COMPONENT VIDEO
PR PB Y
Output
(MONITOR OUT)
PREPARATION
15
CONNECTIONS
Connecting video components
■ Connections for DVD playback
Note
Be sure to connect your video source components in the same way you connect your video monitor to this unit if V.CONV (see page 70)
is set to OFF. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video source
components to this unit using the VIDEO connections. (Even when V.CONV is set to OFF, S-video signals input from your video
source component are automatically converted to composite signals in this unit.)
DVD
O
Coaxial out
Optical out
Audio out
DVD player
LRC
AUDIO
Video out
V
VIDEO S VIDEO
DVD
VIDEO
R PB Y
S
COMPONENT VIDEO
PR PB Y
DVD
MONITOR
OUT
P
Video in
Video
monitor
16
DVD
COAXIAL
DIGITAL
INPUT
MONITOR OUT
VIDEO S VIDEO
CONNECTIONS
■ Connecting to the MULTI CH INPUT jacks
This unit is equipped with 8 additional input jacks (left and right FRONT, CENTER, left and right SURROUND, left and
right SURROUND BACK and SUBWOOFER) for discrete multi-channel input from a multi-format player, external
decoder, sound processor or pre-amplifier.
Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to
match the left and right outputs to the left and right input jacks for the front and surround channels.
For 6-channel input
FRONT
SURROUND
WOOFER
MULTI CH INPUT
Subwoofer
out
Multi-format player/
External decoder
Front
out
For 8-channel input
FRONT
SURROUND
SURROUND
BACK
SUB
CENTER
LRLR
Center
out
Surround
out
Front
out
SUB
CENTER
WOOFER
MULTI CH INPUT
Subwoofer
out
Center
out
Multi-format player/
External decoder
LR LRLR
Surround
back out
Surround
PREPARATION
out
Notes
• When you select MULTI CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you
cannot select sound field programs.
• This unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that
you connect at least a 5.1-channel speaker system before using this feature.
• When headphones are used, only front left and right channels are output.
17
CONNECTIONS
■ Connections for other video components
Notes
• Be sure to connect your video source components in the same way you connect your video monitor to this unit if VIDEO CONV. (see
page 70) is set to OFF. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video
source components to this unit using the VIDEO connections. (Even when V.CONV is set to OFF, S-video signals input from your
video source component are automatically converted to composite signals in this unit.)
• Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video
connections (i.e., S-video) between each component.
Video out
Optical out
Audio out
O
Cable TV or
satellite tuner
LR
AUDIO
V
VIDEO S VIDEO
DTV/
CBL
VIDEO
RPB
S
COMPONENT VIDEO
PR PB Y
DTV/
CBL
MONITOR
OUT
P
Y
Video in
Video
monitor
IN
VCR 1
OUT
DTV/CBL
COAXIAL
DIGITAL
INPUT
MONITOR OUT
VIDEO S VIDEO
LR LR
DVD recorder
Audio out Video out
or VCR
■ VIDEO AUX jacks (on the front panel)
Use these jacks to connect any video source, such as a
game console or video camera, to this unit.
V
or or
Video inAudio in
S
S
V
VIDEO AUX
VIDEOS VIDEO OPTICALL AUDIO R
V
S
O
L
R
Optical out
Audio out R
Audio out L
Video out
Game
console or
video
camera
S-video out
18
Connecting audio components
■ Connections for audio components
CONNECTIONS
MD recorder or
tape deck
Optical in
O
Optical out
O
Audio out
L
R
L
R
Audio in
DIGITAL
OUTPUT
MD/CD-R
OPTICAL
MD/CD-R
CD
COAXIAL
DIGITAL
INPUT
(PLAY)
MD/
CD-R
OUT
(REC)
AUDIO
CD
IN
Audio out
L
R
CD player
PREPARATION
Coaxial out
C
19
CONNECTIONS
■ Connecting to an external amplifier
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the PRE OUT jacks as follows.
Notes
• When audio pin plugs are connected to the PRE OUT jacks for
output to an external amplifier, do not make connections to the
corresponding SPEAKERS terminals. Set the volume of the
amplifier connected to this unit to the maximum.
• The signals output through the FRONT PRE OUT and
CENTER PRE OUT jacks are affected by the TONE
CONTROL settings.
• If SPEAKERS A is turned off and SP B is set to ZONE B (see
page 71), signals will only be output from the FRONT PRE
OUT jacks.
12354
PRE OUT
CENTER SINGLE
SURROUND
SURROUND
SUB
WOOFER
BACK
FRONT
1 FRONT PRE OUT jacks
Front channel line output jacks.
2 SURROUND PRE OUT jacks
Surround channel line output jacks.
3 CENTER PRE OUT jack
Center channel line output jack.
4 SURROUND BACK PRE OUT jacks
Surround back or presence channel line output jacks.
5 SUBWOOFER PRE OUT jack
Connect a subwoofer with built-in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
Notes
• Each PRE OUT jack outputs the same channel signals as the
corresponding speaker terminals.
• Adjust the volume level of the subwoofer with the control on
the subwoofer. It is also possible to adjust the volume level
using the remote control (see “Manually adjusting speaker
levels” on page 59).
• Some signals may not be output from the SUBWOOFER PRE
OUT jack depending on the SPEAKER SET (see page 63) and
LFE/BASS OUT (see page 64) settings.
20
Connecting the FM and AM antennas
CONNECTIONS
Both FM and AM indoor antennas are included with this
unit. In general, these antennas should provide sufficient
signal strength. Connect each antenna correctly to the
designated terminals.
Indoor FM antenna
(included)
75Ω UNBAL.
FM
ANT
AM loop antenna
(included)
TUNER
AM
GND
ANT
Ground (GND terminal)
For maximum safety and minimum
interference, connect the antenna
terminal to a good earth ground. A good
earth ground is a metal stake driven into
moist earth.
GND
■ Connecting the AM loop antenna
1 Set up the AM loop antenna, then connect it
to the terminals on this unit.
Notes
• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
• A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality, an
outdoor antenna may improve the quality. Consult the nearest
authorized YAMAHA dealer or service center about outdoor
antennas.
PREPARATION
2 Press and hold the tab to
insert the AM loop antenna
lead wires into the AM ANT
and GND terminals.
3 Orient the AM loop antenna
for the best reception.
21
CONNECTIONS
Connecting the power supply cord Speaker impedance setting
■ Connecting the AC power cord
Plug the power cord into an AC wall outlet.
■ AC OUTLET(S) (SWITCHED).....2 outlets
Use these outlets to connect the power cords from your
other components to this unit. Power to the AC
OUTLET(S) is controlled by this unit’s STANDBY/ON
(or SYSTEM POWER and STANDBY). The outlet(s)
supply power to any connected component whenever this
unit is turned on. The maximum power (total power
consumption of components) that can be connected to the
AC OUTLET(S) is 100 W.
■ Memory back-up
The memory back-up circuit prevents the stored data from
being lost even if this unit is in the standby mode.
However if the power cord is disconnected from the AC
wall outlet, or the power supply is cut for more than one
week, the stored data will be lost.
CAUTION
If you are using 4 or 6 ohm speakers, set the impedance to
4 or 6 ohms as follows before turning on the power.
Be sure this unit is in the standby mode.
1 Turn off the power to this unit, and while
holding down STRAIGHT (EFFECT), press
STANDBY/ON.
This unit turns on, and “SP IMP.” appears in the front
panel display.
STRAIGHT
EFFECT
While holding
down, press
STANDBY
/ON
SP IMP.
2 Press STRAIGHT (EFFECT) repeatedly to
select “4 Ω MIN”.
STRAIGHT
EFFECT
3 Press STANDBY/ON to turn off the power.
STANDBY
/ON
The setting you made is reflected the next time this
unit’s power is turned on.
22
Turning on the power
TRANSMITCODE SET
STANDBY
SYSTEM
POWER
CD MD/CD-R
TUNER
V-AUXDVD
AMP
POWERPOWER
VOLUME
TV MUTE TV INPUT
TV VOL TV CH
AVTV
VCR 1 DVR/VCR2
DTV/CBL
MULTI CH IN
SLEEP
When all connections are complete, turn on the power of
this unit.
CONNECTIONS
SILENT CINEMA
1
PURE DIRECT
STANDBY
/ON
OPTIMIZER
MIC
PHONES
SPEAKERS
A B
PRESET/TUNING
FM/AM
XM
SEARCH MODE
EDIT
PROGRAM INPUT
STRAIGHT
EFFECT
A/B/C/D/E
PRESET/TUNING/CH
CATEGORY
LEVELNEXT
+
INPUT MODE
TONE CONTROL
MEMORY
TUNING MODE
DISPLAY
MAN'L/AUTO FM
AUTO/MAN'L MONO
MULTI CH
INPUT
(U.S.A. model)
VOLUME
VIDEO AUX
OPTICALRAUDIOL
VIDEO
S VIDEO
1
1 Press STANDBY/ON (or SYSTEM POWER on
the remote control) to turn on the power of
this unit.
SYSTEM
STANDBY
/ON
or
POWER
PREPARATION
Front panel
Remote control
2 Turn on the video monitor connected to this
unit.
23
AUTO SETUP
AUTO SETUP
Introduction
This receiver employs YAMAHA Parametric Room
Acoustic Optimizer (YPAO) technology which lets you
avoid troublesome listening-based speaker setup and
achieves highly accurate sound adjustments. The supplied
optimizer microphone collects and analyzes the sound
your speakers produce in your actual listening
environment.
Notes
• Please be advised that it is normal for loud test tones to be
output during the auto setup procedure.
• If auto setup stops and error messages appear on the screen,
follow the troubleshooting on page 28.
YPAO performs the following checks and makes
appropriate adjustments to give you the best possible
sound from your system.
WIRING:
Checks which speakers are connected and the polarity of
each speaker.
SIZE:
Checks the speakers frequency response and sets the
crossover/high cut frequency for the subwoofer to
improve the sound relationship between the speakers and
the subwoofer.
DISTANCE:
Checks the distance of each speaker from the listening
position and adjusts the delay of each channel so that the
sound from each speaker reaches the listening position at
the same time.
EQUALIZING:
Adjusts frequency and levels of each channel’s parametric
equalizer to reduce coloration across the channels and
create a cohesive sound field. This is particularly
important if you use different brands or sizes of speakers
for some channels or have a room with unique sonic
characteristics.
YPAO equalizing calibration incorporates three
parameters (frequency, level and Q factor) for each of the
seven bands in its parametric equalizer to provide highly
precise automatic adjustment of frequency characteristics.
Optimizer microphone setup
1 Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel.
(U.S.A. model)
PURE DIRECT
STANDBY
/ON
PRESET/TUNING
FM/AM
A/B/C/D/E
OPTIMIZER
MIC
PHONES
SILENT CINEMA
SPEAKERS
A B
SEARCH MODE
EDIT
EFFECT
CATEGORY
PROGRAM
XM
Notes
• After you have completed the auto setup procedure, be sure to
disconnect the optimizer microphone.
• The optimizer microphone is sensitive to heat.
– Keep it away from direct sunlight.
– Do not place it on top of this unit.
2 Place the optimizer microphone on a flat
level surface with the omni-directional
microphone head upward, at your normal
listening position.
If possible, use a tripod (etc.) to affix the optimizer
mic at the same height as your ears would be when
you are seated in your listening position.
Optimizer microphone position
PRESET/TUNING/CH
LEVELNEXT
+
INPUT MODE
TONE CONTROLSTRAIGHT
LEVEL:
Checks and adjusts the sound level (volume) of each
speaker.
24
AUTO SETUP
Starting the setup
For best results, make sure the room is as quiet as possible
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.
y
If your subwoofer has adjustable volume and crossover/high cut
frequency controls, set the volume between 9 and 11 o’clock (as
viewed on a conventional clockface) and set the crossover/high
cut frequency to the maximum.
VOLUME
MAX
MIN
Subwoofer
1 Switch on this unit and your video monitor.
Make sure the OSD is displayed.
2 Press AMP.
3 Press SET MENU.
y
When MEMORY GUARD is set to ON, you cannot select
any other SET MENU items (see page 60).
4 Press u / d to select AUTO SETUP, then
press ENTER.
CROSSOVER/
HIGH CUT
50Hz
150Hz
AMP
SET MENU
MENU
SRCH MODE
5 Press u / d to select “SETUP”, then press
j / i to select the desired setting.
1 AUTO:MENU
. SETUP;;;;;;;AUTO
START
Automatic
processing
of all items
p
p
[ ]/[ ]:Up/Down
[<]/[>]:Select
AUTO To perform the auto setup procedure
(YPAO).
RELOAD To reload the last auto setup (YPAO)
settings to override any manual
changes.
UNDO To undo the last auto setup (YPAO)
and restore the previous settings.
DEFAULT To restore the factory preset (default)
setup parameters.
y
You can choose RELOAD or UNDO only if you have
already performed the auto setup procedure.
6 Press d to select “START”, then press
ENTER to start the setup procedure.
The screen changes as follows.
1 AUTO:MENU
SETUP;;;;;;;AUTO
.START
Automatic
processing
of all items
p
p
[]/[]:Up/Down
[ENTER]:Start
PREPARATION
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
SET MENU
.;AUTOSETUP
;MANUALSETUP
;SIGNAL INFO.
p
p
[ ]/[ ]:Up/Down
[ENTER]:Enter
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
2 AUTO:CHECK
INITIALZING
.
WIRING
SIZE/DISTANCE.
EQUALIZING.
LEVEL.
CHECK CH=CENTER
|||||;;;;;;;;
p
[]:Exit
RESULT:EXIT
.WARNING (3)
RESULT
SP : 5/4/0.1
DIST: 10.0/ 12.0ft
LVL : -9.0/ +6.5dB
.>SET CANCEL
p
p
[]/[]:Up/Down
[ENTER]:Enter
25
AUTO SETUP
The results displayed in the RESULT:EXIT screen
are as follows:
SP The number of connected speakers
displayed in the order:
Front/Back/Subwoofer
DIST The distance of the speakers from this
unit displayed in the order:
Closest speaker distance/Farthest
speaker distance
LVL The speaker output level displayed in
the order:
Lowest output level/Highest output
level
• If you selected AUTO in step 5, “WAITING”
appears when the auto setup procedure is started,
then loud test tones are output from each speaker in
turn.
• If you selected DEFAULT, RELOAD or UNDO in
step 5, no test tones are output.
• If an ERROR screen appears, see “If an error
screen appears” on page 26.
• If a WARNING screen appears, see “If a warning
screen appears” on page 27.
y
You can display the detailed result information by using d and
ENTER to select “RESULT”. In the detailed result information
screen, you can switch information by pressing
u / d / j / i.
■ If an error screen appears
Use u / d / j / i to select RETRY or EXIT, then
press ENTER.
ERROR
.E-9:USER CANCEL
.
.Don't operate
.any function.
.>RETRYEXIT
p
p
[]/[]:Up/Down
[ENTER]:Enter
RETRY To retry the auto setup procedure.
EXIT To exit auto setup.
7 Press j / i to select SET or CANCEL, then
press ENTER to return to the SET MENU
screen.
RESULT:EXIT
WARNING (3)
RESULT
SP : 5/4/0.1
DIST: 10.0/ 12.0ft
LVL : -9.0/ +6.5dB
.>SET CANCEL
p
p
[]/[]:Up/Down
[ENTER]:Enter
SET To apply the auto setup (YPAO)
settings.
CANCEL To cancel the auto setup (YPAO)
without making any changes.
y
If you are not satisfied with the result or want to manually adjust
each setup parameter, use the manual setup parameters (see
page 59).
Notes
• If E-10 appears during testing, restart the procedure from step 3.
• To cancel the auto setup procedure before completion, press u.
26
Loading...