Yamaha HTR-5640, HTR 5650 User Manual 2

0 (0)
Yamaha HTR-5640, HTR 5650 User Manual 2

U

HTR-5650/HTR-5640

AV Receiver

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1Read Instructions – All the safety and operating instructions should be read before the product is operated.

2Retain Instructions – The safety and operating instructions should be retained for future reference.

3Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4Follow Instructions – All operating and use instructions should be followed.

5Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9A product and cart combination should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the product and cart combination to overturn.

10Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a)When the power-supply cord or plug is damaged,

b)If liquid has been spilled, or objects have fallen into the product,

c)If the product has been exposed to rain or water,

I CAUTION

d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

e)If the product has been dropped or damaged in any way, and

f)When the product exhibits a distinct change in performance - this indicates a need for service.

20Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

21Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

23Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

24Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

MAST

ANTENNA

 

LEAD IN

 

WIRE

GROUND

 

CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810–20)

ELECTRIC

 

SERVICE

 

EQUIPMENT

GROUNDING CONDUCTORS

 

 

(NEC SECTION 810–21)

 

GROUND CLAMPS

 

POWER SERVICE GROUNDING

 

ELECTRODE SYSTEM

 

(NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

 

FCC INFORMATION (for US customers)

1.IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2.IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3.NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

CAUTION II

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

11Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

14Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.

17Before moving this unit, press STANDBY/ON to set this unit in standby mode, and disconnect the AC power plug from the wall outlet.

18VOLTAGE SELECTOR (China and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110/120/220/240 V AC, 50/60 Hz.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called standby mode. In this state, this unit is designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

III CAUTION

CONTENTS

INTRODUCTION

 

CONTENTS ............................................................

1

FEATURES .............................................................

2

GETTING STARTED ............................................

3

Supplied accessories ..................................................

3

Installing batteries in the remote control ...................

3

CONTROLS AND FUNCTIONS .........................

4

Front panel .................................................................

4

Remote control ..........................................................

6

Front panel display ....................................................

8

PREPARATION

 

CONNECTIONS ....................................................

9

Before connecting components .................................

9

Connecting video components ................................

10

Connecting audio components ................................

12

Connecting the antennas ..........................................

13

Connecting an external decoder ..............................

14

Connecting the speakers ..........................................

15

Connecting the power supply cords ........................

18

Turning on the power ..............................................

18

BASIC SYSTEM SETTINGS .............................

19

Using the basic menu ..............................................

19

Setting the unit to match your speaker system ........

21

Setting speaker output levels (SP LEVEL) .............

21

BASIC OPERATION

 

PLAYBACK ..........................................................

22

Input modes and indications ....................................

24

Selecting a sound field program ..............................

25

DIGITAL SOUND FIELD PROCESSING (DSP)

............................................................................

28

Understanding sound fields .....................................

28

Hi-Fi DSP programs ................................................

28

CINEMA-DSP ......................................................

29

Sound design of CINEMA-DSP .............................

29

CINEMA-DSP Programs ........................................

29

Sound field effects ...................................................

31

TUNING ................................................................

32

Presetting stations ....................................................

33

Selecting a preset station .........................................

35

SLEEP TIMER .....................................................

36

RECORDING .......................................................

37

ADVANCED OPERATION

 

SET MENU ...........................................................

38

Set menu list ............................................................

38

Adjusting the items on the set menu .......................

38

SOUND 1 SPEAKER SET (speaker mode settings)

.............................................................................

39

SOUND 2 SP DISTANCE (speaker distance) ........

41

SOUND 3 LFE LEVEL ..........................................

41

SOUND 4 D. RANGE (dynamic range) .................

41

SOUND 5 CENTER GEQ

 

(center graphic equalizer) ....................................

42

SOUND 6 HP TONE CTRL

 

(headphone tone control) ....................................

42

INPUT 1 I/O ASSIGN (input/output assignment) ..

42

INPUT 2 INPUT MODE (initial input mode) ........

43

OPTION 1 DISPLAY SET ......................................

43

OPTION 2 MEM. GUARD (memory guard) .........

43

OPTION 3 AUDIO MUTE .....................................

43

OPTION 4 ZONE SET ...........................................

44

REMOTE CONTROL FEATURES ...................

45

Control area .............................................................

45

Setting the manufacturer code .................................

46

Clearing setup manufacturer codes .........................

46

Controlling other components .................................

47

SETTING THE SPEAKER LEVELS ................

48

Adjusting the volume during playback ...................

48

Using the test tone ...................................................

48

ADDITIONAL INFORMATION

 

SOUND FIELD PROGRAM PARAMETER

 

EDITING ..........................................................

49

Changing parameter settings ...................................

49

Digital sound field parameter descriptions ..............

50

TROUBLESHOOTING .......................................

51

GLOSSARY ..........................................................

55

SPECIFICATIONS ..............................................

57

INTRODUCTION

 

 

 

 

 

PREPARATION

 

 

 

 

 

OPERATION

BASIC

 

 

 

 

OPERATION

ADVANCED

 

 

 

 

INFORMATION

ADDITIONAL

 

 

English

1

FEATURES

Built-in 6-channel power amplifier

Minimum RMS output power (0.06% THD, 20 Hz – 20 kHz, 8)

HTR-5650

[U.S.A. and Canada models]

Main:

80 W + 80 W

Center:

80 W

Rear:

80 W + 80 W

Rear center:

80 W

[Other models]

 

Main:

70 W + 70 W

Center:

70 W

Rear:

70 W + 70 W

Rear center:

70 W

HTR-5640

[U.S.A. and Canada models]

Main:

75 W + 75 W

Center:

75 W

Rear:

75 W + 75 W

Rear center:

75 W

[Other models]

 

Main:

65 W + 65 W

Center:

65 W

Rear:

65 W + 65 W

Rear center:

65 W

About this manual

Multi-mode digital sound field processing

Dolby Pro Logic/Dolby Pro Logic II decoder

Dolby Digital/Dolby Digital EX decoder

DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6 Decoder

CINEMA DSP: Combination of YAMAHA DSP technology and Dolby Pro Logic, Dolby Digital or DTS

Virtual CINEMA DSP

SILENT CINEMA DSP

Sophisticated AM/FM Tuner

40-Station random access preset tuning

Automatic preset tuning

Preset station shifting capability (Preset editing)

Other features

96 kHz/24-bit D/A converter

Set menu for optimizing this unit for your Audio/ Video system

Test tone generator for easier speaker balance adjustment

6-channel external decoder input

Component video input/output capability

Optical and coaxial digital audio signal jacks

Sleep timer

Remote control with preset manufacturer codes

Zone B capability

HTR-5650

S-video signal input/output capability

Video Conversion (Composite Video S Video)

This document is the owner’s manual for both the HTR-5650 and HTR-5640. For details on various functions unique to each model, descriptions given for each model name.

y indicates a tip for your operation.

Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

This manual is printed prior to production. Design and specifications are subject to change in part for the reason of the improvement in operativity ability, and others. In this case, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater System, Inc.

2

GETTING STARTED

Supplied accessories

After unpacking, check that the following parts are contained.

Remote control

Batteries (4)

 

 

 

 

(AAA, R03, UM-4)

CODE SET

TRANSMIT

 

 

POWER

POWER

STANDBY

SYSTEM

 

POWER

 

TV

AV

 

 

 

CD

MD/CD-R

TUNER

SLEEP

 

DVD

D-TV/CBL

V-AUX

6CH INPUT

 

VCR

 

 

AMP

 

+

+

 

+

 

TV VOL

TV CH

VOLUME

 

 

75-ohm/300-ohm antenna

TV MUTE

TV INPUT

MUTE

 

 

adapter (U.K. model)

HALL

JAZZ CLUB CONCERT TAINMENT

 

 

ROCK

ENTER-

 

1

2

3

4

 

MUSIC

TV

MOVIE

MOVIE

 

VIDEO

THEATER

THEATER 1 THEATER 2

 

5

6

7

8

 

/DTS

NIGHT

6.1/5.1

STEREO

 

SUR.

 

9

0

+10

ENTER

 

 

 

 

EFFECT

 

LEVEL

PRESET/CH

SET MENU

 

TITLE

 

 

MENU

 

 

 

 

A/B/C/D/E

 

SELECT

+

 

TEST

 

 

 

 

RETURN

 

 

DISPLAY

 

REC

AUDIO

DISC SKIP

AM loop antenna

Indoor FM antenna (U.S.A., Canada, China, Korea and General models)

(Europe, U.K., Australia and Singapore models)

INTRODUCTION

Installing batteries in the remote

control

Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment.

2

1

3

1 Press the part marked with a and slide off the battery compartment cover.

2 Insert the four batteries supplied (AAA, R03,

UM-4) according to the polarity markings on the inside of the battery compartment.

3 Slide the cover back on so that it snaps into place.

Notes on batteries

Change all of the batteries if you notice a decrease in the operating range of the remote control, that the indicator does not flash, or the light becoming dim.

Do not use old batteries together with new ones.

Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the manufacturer code and program any acquired functions that may have been cleared.

English

3

CONTROLS AND FUNCTIONS

Front panel

1 2

 

3 4

 

5

 

6

 

7 8

9 0

 

q

 

 

 

 

 

 

 

 

 

 

 

VOLUME

 

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

RDS MODE/FREQ

EON

 

 

 

 

PRESET/TUNING FM/AM

 

 

STANDBY

 

 

EDIT

 

 

 

 

 

EDIT

 

 

 

/ON

 

 

PTY SEEK

 

 

 

 

 

 

 

 

 

 

 

MODE

START

 

 

 

 

TUNING MODE

MEMORY

 

 

 

 

 

 

 

 

 

 

 

AUTO/MANUAL MONO MAN`L/AUTO FM

 

 

INPUT MODE

6CH INPUT

 

 

 

 

 

 

 

 

 

 

SILENT

SPEAKERS

STEREO

 

PROGRAM

A/B/C/D/E

PRESET/TUNING

CONTROL

BASS/TREBLE

 

VIDEO AUX

 

 

 

 

 

 

A

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

EFFECT

 

 

NEXT

SET MENU

 

 

 

 

 

PHONES

 

 

 

 

 

 

 

 

 

VIDEO

L AUDIO

R

w

e

r

 

t

y

u

i

o

 

p

 

 

 

 

RDS MODE/FREQ

EON

 

 

 

 

 

 

 

PTY SEEK

MODE START

a s d f

(U.K. and Europe models only)

1 STANDBY/ON

Turns the unit on, or sets it in standby mode. When you turn the unit on, you will hear a click and there will be a 4 to 5-second delay before it can reproduce sound.

Standby mode

In this mode, the unit uses a small amount of power in order to receive infrared-signals from the remote control.

2 INPUT MODE

Sets the priority for the types of input signals (AUTO, DTS, ANALOG) received when one component is connected to two or more input jacks. You cannot set priority for an audio source if you have selected 6CH INPUT as the input source.

3 INPUT

Selects the input source you want to listen to or watch.

4 6CH INPUT

Selects the audio source connected to the 6CH INPUT jacks. This selection takes priority over sources selected with INPUT (or the input selector buttons on the remote control).

5 Remote control sensor

Receives signals from the remote control.

6 Front panel display

Shows information about the operational status of the unit.

7 TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual.

8 PRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING l/ h between selecting a preset station number and tuning (the colon (:) turns on or off).

This button is also used to exchange the assignment of two preset stations with each other.

9 FM/AM

Switches the reception band between FM and AM.

0 MEMORY (MAN’L/AUTO FM)

Stores the current station in memory.

q VOLUME

Controls the output level of all audio channels. This does not affect the OUT (REC) level.

4

w SILENT (PHONES jack)

Allows you to enjoy DSP effects when listening with headphones. When you connect headphones to the headphone jack, no signals are output to the speakers.

e SPEAKERS A/B

Turns the set of main speakers connected to the A and/or B terminals on or off.

r STEREO/EFFECT

Switches between normal stereo and DSP effect reproduction. When you select STEREO, the unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effects, to the main left and right speakers.

t PROGRAM l / h

Select the DSP program.

y A/B/C/D/E

Selects preset station groups A to E when the unit is in tuner mode.

NEXT

Selects the set menu mode when the unit is not in tuner mode.

u PRESET/TUNING l / h

Select preset station numbers 1 to 8 when a colon (:) is displayed in the front panel display.

Select the tuning frequency when a colon (:) is not displayed when the unit is in tuner mode.

SET MENU –/+

Adjust settings on the set menu when the unit is not in tuner mode.

i CONTROL

Switches between Bass (low-frequency response) control mode and Treble (high-frequency response) control mode.

o BASS/TREBLE –/+

Increase or decrease low/high-frequency response when the unit is in Bass/Treble control mode. The sound changes 2dB each time you press one of these buttons. Control range: –10 to +10dB

p VIDEO AUX jacks

Inputs for audio and video signals from a portable external source (game console, etc.). Set the input source to V-AUX to select source signals from these jacks.

CONTROLS AND FUNCTIONS

(U.K. and Europe models only)

a RDS MODE/FREQ

Press this button when the unit is receiving an RDS station, to cycle the display mode among PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data service) and/or frequency display mode in turn.

s PTY SEEK MODE

Press this button to set the unit in the PTY SEEK mode.

d PTY SEEK START

Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.

f EON

Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically.

INTRODUCTION

English

5

CONTROLS AND FUNCTIONS

Remote control

This section describes the remote control controls and their functions. Make sure that the AMP mode is selected before starting operation.

1

8

1 Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

2 CODE SET

Used to set up manufacturer codes (see page 46).

2

CODE SET

TRANSMIT

 

 

 

 

SYSTEM

 

POWER

POWER

STANDBY

POWER

 

TV

AV

 

 

 

CD

MD/CD-R

TUNER

SLEEP

93 Input selector buttons

0Select the input source and set the remote control to operate the selected source component.

3

 

 

 

q

D-TV/CBL

V-AUX

 

 

DVD

6CH INPUT

 

 

 

 

 

w

VCR

 

 

AMP

 

 

 

 

 

e

 

 

 

 

r

+

+

 

+

 

TV VOL

TV CH

VOLUME

 

 

t

 

 

 

 

TV MUTE

TV INPUT

 

 

 

 

 

MUTE

y

HALL

JAZZ CLUB

ROCK

ENTER-

 

CONCERT

TAINMENT

 

 

1

2

3

4

 

 

MUSIC

TV

MOVIE

MOVIE

 

4

VIDEO

THEATER

THEATER 1 THEATER 2

 

5

6

7

8

 

 

/DTS

NIGHT

6.1/5.1

STEREO

u

 

SUR.

 

 

9

0

+10

ENTER

i

 

 

 

 

 

 

 

 

 

EFFECT

o

 

LEVEL

PRESET/CH

SET MENU

 

 

 

 

5

TITLE

 

 

MENU

p

 

 

 

 

A/B/C/D/E

 

6

SELECT

+

 

 

 

 

 

TEST

 

 

 

 

7

RETURN

 

 

DISPLAY

 

 

REC

 

 

 

 

 

 

 

 

AUDIO

 

DISC SKIP

4 DSP program

Select DSP programs when the remote control is in AMP mode. Press one of these buttons repeatedly to select a DSP program within a program group.

5 LEVEL

Selects the effect speaker channel to adjust.

6 Multi control section

Used to change and implement settings.

7 TEST

Outputs a test tone for use when adjusting the speaker levels.

8 TRANSMIT indicator

Flashes while the remote control is sending signals.

9 STANDBY

Sets this unit in standby mode.

0 SYSTEM POWER

Turns on the power of the unit.

q SLEEP

Sets the sleep timer.

w 6CH INPUT

Selects the audio source connected to the 6CH INPUT jacks.

e AMP

Switches the function of the same controls between AMP and the component selected using the input selector buttons.

r /

Sets the remote control to operate other components (not necessarily connected to this unit) without changing this unit’s input source.

t VOLUME +/–

Increases or decreases the volume level.

6

y MUTE

Mutes the sound. Press again to restore the audio output to the previous volume level.

u 6.1/5.1

Switches the Dolby Digital EX or DTS ES decoder on or off.

i STEREO/EFFECT

Switches between normal stereo and DSP effect reproduction. When you select STEREO the unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effect sounds, to the main left and right speakers.

o NIGHT

Sets the unit in night listening mode.

p SET MENU

Selects the set menu mode.

CONTROLS AND FUNCTIONS

Using the remote control

30°

30°

Approximately 6 m (20 feet)

INTRODUCTION

 

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

Handling the remote control

Do not spill water or other liquids on the remote control.

Do not drop the remote control.

Do not leave or store the remote control in the following types of conditions:

high humidity or temperature such as near a heater, stove or bath;

dusty places; or

in places subject to extremely low temperatures.

English

7

CONTROLS AND FUNCTIONS

Front panel display

1

2

3

4

5

6

7

8

ES

 

VCR

V-AUX

D-TV/CBL

DVD

MD/CD-R

TUNER

CD

VIRTUAL

 

NIGHT

 

 

 

 

 

MUTE VOLUME

MATRIX DISCRETE

SP

 

 

 

PS PTY RT CT

STEREO AUTO

DIGITAL

SILENT

A B

HiFi DSP

 

 

EON PTY HOLD TUNED MEMORY

SLEEP

EX

~~~~~~~~~~~~~~dB

L C R

PCM PL

 

f t

PL

 

 

LFE RL RC RR

9

0 q w e r t

y u i o p a

 

 

s (U.K. and Europe models only)

1 Processor indicators

The indicators for the various decoders light up when the decoders are in use.

2 VIRTUAL indicator

Lights up when using Virtual CINEMA DSP.

3 Headphones indicator

Lights up when headphones are connected to the headphone jack.

4 Input source indicator

Highlights the current input source with a cursor.

5 Sound field indicator

Displays the sound field management the unit is using when you listen to a DSP sound field program.

6 AUTO indicator

Shows that this unit is in the automatic tuning mode.

7 MUTE indicator

Flashes while the MUTE function is on.

8 VOLUME level indicator

Indicates the volume level.

9 PCM indicator

Lights up when this unit is reproducing PCM (pulse code modulation) digital audio signals.

0 SILENT indicator

Lights up when headphones are connected and the digital sound field processor is on.

q SP A B indicator

Lights up to indicate which set of main speakers is selected. Both indicators light up when both sets of speakers are selected.

w NIGHT indicator

Lights up when the unit is set to night listening mode.

e HiFi DSP indicator

Lights up when you select a Hi-Fi DSP sound field program.

r CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field program.

t Multi-information display

Shows the current DSP program name and other information when you are adjusting or changing settings.

y STEREO indicator

Lights up when the unit is receiving a strong signal from a FM stereo broadcast while the “AUTO” indicator is lit.

u TUNED indicator

Lights up when this unit is tuned to a radio station.

i MEMORY indicator

Flashes to show a station can be stored in memory.

o SLEEP indicator

Lights up while the sleep timer is on.

p LFE indicator

Lights up when the input signal contains an LFE signal.

a Input channel indicator

The indicators for the appropriate sound channels light up when a digital signal from a source is played back.

s RDS indicator (U.K. and Europe models only)

The name(s) of the RDS data offered by the currently received RDS station light(s) up.

EON indicator lights up when an RDS station that offers the EON data service is being received.

PTY HOLD indicator lights up while searching for stations in the PTY SEEK mode.

8

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between the components have been completed.

Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components require different connection methods and have different jack names. Refer to the operation instructions for each component you wish to connect to this unit.

After you have completed all connections, check them again to make sure they are correct.

The jack names correspond to the names on the input selector.

Connecting to digital jacks

This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. Use digital connections if you wish to enjoy the multi-channel sound track of DVD material, etc. with DSP effects. All digital input jacks are acceptable for 96 kHz sampling digital signals.

Note

The OPTICAL jacks on this unit conform to the EIA standard. If you use a fiber optic cable that does not conform to this standard this unit may not function properly.

DIGITAL INPUT jacks

This jack is reserved for factory use.

(pages 9 – 12)

Do not connect any equipment to this jack.

Audio component jacks

Video component jacks

Speaker terminals

(page 12)

(pages 10 – 11)

(page 17)

PREPARATION

COMPORNENT VIDEO

PR PB Y

 

 

 

 

 

 

 

 

DVD

 

 

 

AUDIO

 

AUDIO

 

VIDEO

A

 

 

R

L

R

L

VIDEO

 

S VIDEO

 

 

 

 

 

 

 

 

D-TV

 

 

CD

 

 

DVD

 

 

/CBL

DIGITAL

 

 

 

 

B

INPUT

 

 

 

 

 

 

 

CD

5

 

 

 

 

 

 

MONITOR

 

 

IN

 

 

D-TV

 

 

OUT

 

 

 

 

 

 

 

 

 

(PLAY)

 

 

/CBL

 

 

 

COAXIAL

 

MD

 

 

 

 

 

 

 

/CD-R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTICAL

 

 

 

 

 

 

 

TUNER

D-TV/CBL4 (REC)OUT

 

 

IN

 

 

 

 

 

 

VCR

 

R

MAIN

L

SPEAKERS

REAR

 

 

 

 

 

 

 

R

L

DVD

3 MAIN

 

 

OUT

 

AM

 

 

 

(SURROUND)

 

 

 

 

 

 

 

ANT

 

 

 

 

 

MD/CD-R 2 SURROUND

 

 

 

 

GND

 

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

S VIDEO

 

 

 

 

 

 

 

 

 

 

 

75Ω UNBAL.

B

 

 

 

 

 

 

 

 

 

 

FM

 

 

 

 

 

 

 

SUB

 

SUB

 

ANT

 

 

 

 

 

MD/CD-R 1

WOOFER

CENTER

WOOFER

MONITOR OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTICAL

 

 

 

 

 

 

 

 

CENTER

 

REAR

 

 

 

 

 

 

 

 

 

 

 

CENTER

DIGITAL

6CH INPUT

OUTPUT

 

 

 

 

 

 

 

OUTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6CH INPUT jacks

Antenna input terminals

 

 

 

(page 14)

(page 13)

 

DIGITAL OUTPUT jack

SUBWOOFER OUTPUT

(page 12)

jack (page 17)

AC OUTLETS (page 18)

All illustrations of the rear panel in this manual are based on the HTR-5650.

The jacks in the shaded area in this illustration are not present on the HTR-5640.

English

9

CONNECTIONS

Connecting video components

Refer to the connection examples on the next page.

Types of video jacks

VIDEO

S VIDEO

COMPONENT VIDEO

 

PR

PB

Y

 

 

 

 

 

 

 

1

2

3

 

 

 

 

HTR-5650

 

1VIDEO jack

Conventional composite video signal.

2S VIDEO jack HTR-5650

Transmits color and luminance separately and achieves high-quality color reproduction.

3COMPONENT VIDEO jacks

Transmit color difference (PB, PR) and luminance separately and provide the best quality picture.

Use the commercially available cable type specified for connecting each jack.

y

You can designate the input for the COMPONENT VIDEO A and B jacks to suit your components by using “INPUT 1 I/O ASSIGNMENT” on the set menu.

HTR-5650

Signals received through the S VIDEO input jacks can be converted to composite signals in this unit and output through its VIDEO MONITOR OUT as well.

(With the exception of China and General models) Signals received through the VIDEO jack on this unit can be output through the S VIDEO MONITOR OUT jack by setting “V CONV.” in “OPTION 1 DISPLAY SET” on the set menu to ON.

When the unit receives signals through both S VIDEO and VIDEO jacks, signals input through the S VIDEO jack have priority.

Signal flow inside this unit

 

Output

Input

(MONITOR OUT)

COMPONENT

VIDEO

S VIDEO

VIDEO

Only when “V CONV.” in “OPTION 1 DISPLAY SET” is set to ON on the set menu.

Connecting a video monitor

Connect the video input jack on your video monitor to the MONITOR OUT VIDEO jack.

Note

If you connect this unit with a source component using Component video jacks, you also need to connect your video monitor using Component video jacks.

Connecting a DVD player/digital TV/cable

TV

Connect the optical digital audio signal output jack on your component to the DIGITAL INPUT jack and connect the video signal output jack on the component to the VIDEO jack on this unit.

Note

HTR-5640

The unit has only one DIGITAL INPUT jack, for use with a DVD player.

y

Use the AUDIO jacks on this unit for a video component which does not have optical digital output jack. However, multi-channel reproduction cannot be obtained with audio signals input from the AUDIO jacks.

Connecting a recording component

Connect the audio signal input jacks on your video component to the AUDIO OUT jacks on this unit. Then connect the video signal input jack on the video component to the VIDEO OUT jack on this unit for picture recording.

Connect the audio signal output jacks on your component to the AUDIO IN jacks on this unit. Then connect the video signal output jack on the component to the VIDEO IN jack on this unit to play a source from your recording component.

Note

Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components.

10

CONNECTIONS

 

 

 

 

 

 

 

 

 

OPTICAL

 

 

 

 

 

 

 

 

 

 

OUTPUT

 

 

 

 

 

 

 

 

 

 

O

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

DVD player

 

R

 

 

 

 

 

 

 

 

AUDIO

TV/digital TV/

 

 

O

 

 

 

 

 

 

OUTPUT

 

 

 

 

 

 

 

 

 

cable TV

 

 

OPTICAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUTPUT

 

 

AUDIO

 

VIDEO

 

VIDEO

 

 

 

 

L

R

 

 

 

 

 

 

OUTPUT

 

OUTPUT

 

OUTPUT

 

 

 

 

 

 

 

 

COMPORNENT VIDEO

 

 

 

 

 

 

 

 

 

PR PB

Y

 

 

 

 

 

 

 

 

 

DVD

 

 

 

 

AUDIO

AUDIO

 

VIDEO

A

 

 

 

 

 

 

 

 

 

 

R

L

R

L

VIDEO

S VIDEO

 

 

 

 

 

 

 

 

 

 

D-TV

 

 

 

 

CD

 

 

 

DVD

 

/CBL

 

 

 

DIGITAL

 

 

 

 

B

 

 

 

INPUT

 

 

 

 

 

 

 

 

 

 

CD 5

 

 

 

 

 

 

MONITOR

 

 

 

 

IN

 

 

 

D-TV

 

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

(PLAY)

 

 

 

/CBL

 

 

 

 

 

COAXIAL

MD

 

 

 

 

 

 

 

 

 

/CD-R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTICAL

 

 

 

 

 

 

TUNER

 

 

 

D-TV/CBL4 (REC)OUT

 

 

 

IN

 

 

 

 

 

 

 

 

 

 

VCR

 

 

 

MA

 

DVD 3 MAIN

 

 

 

 

 

 

R

HTR-5650

 

 

 

OUT

 

AM

 

 

 

 

 

 

 

 

 

ANT

 

 

 

MD/CD-R 2 SURROUND

 

 

 

 

 

GND

 

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

S VIDEO

 

 

 

 

 

 

 

 

 

 

75Ω UNBAL.

 

B

 

 

 

 

 

 

 

 

FM

 

 

 

 

SUB

 

SUB

 

MONITOR OUT

ANT

 

 

 

MD/CD-R 1

WOOFER

CENTER

WOOFER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPTICAL

 

 

 

 

 

 

 

 

 

 

DIGITAL

6CH INPUT

OUTPUT

 

 

 

 

 

 

OUTPUT

 

 

 

 

 

PREPARATION

AUDIO AUDIO OUTPUT L R INPUT L R

VIDEO

VIDEO

VIDEO

OUTPUT

INPUT

INPUT

L

R

O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VCR

Video monitor

indicates audio signal direction

 

 

 

indicates left analog cables

 

 

 

indicates right analog cables

 

 

 

indicates optical cables

 

 

 

indicates video signal direction

 

 

 

English

11

CONNECTIONS

Connecting audio components

Connecting a CD player

Connect the coaxial digital output jack on your CD player to the DIGITAL INPUT CD jack on this unit.

y

Use the AUDIO jacks on this unit for a CD player which does not have coaxial digital output jack.

Connecting a CD recorder or MD recorder

HTR-5650

Connect the optical digital signal input jack on your CD recorder or MD recorder to the DIGITAL OUTPUT MD/ CD-R jack on this unit for digital recording.

Connect the optical digital output jack on your CD recorder or MD recorder to the DIGITAL INPUT MD/ CD-R jack on this unit to play a source from your recording component.

HTR-5640

Connect the input jacks on your CD recorder or MD recorder to the MD/CD-R OUT (REC) jacks for analog recording.

Connect the output jacks on your CD recorder or MD recorder to the MD/CD-R IN (PLAY) jacks to play a source from your recording component.

y

Use the AUDIO jacks on this unit for a CD recorder or MD recorder which does not have optical digital input or output jack.

Notes

Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components.

HTR-5650

The DIGITAL OUTPUT jack and analog OUT (REC) jacks are independent. The DIGITAL OUTPUT jack only outputs digital signals, while the OUT (REC) jacks output analog signals only.

COMPORNENT VID

PR PB

 

 

 

 

 

 

 

DVD

 

 

 

AUDIO

AUDIO

 

VIDEO

A

 

 

 

 

 

 

 

 

R L

R L

VIDEO

S VIDEO

 

COAXIAL

 

 

 

 

 

D-TV

DIGITAL CD

 

DVD

 

/CBL

 

 

B

OUTPUT

INPUT

 

 

 

 

CD

5

 

D-TV

 

MONITOR

CD player

C

 

IN

 

 

OUT

 

 

(PLAY)

 

/CBL

 

 

 

 

COAXIAL

MD

 

 

 

 

 

 

/CD-R

 

 

 

 

 

L

 

 

 

 

 

 

OPTICAL

 

 

 

 

TUNER

 

 

D-TV/CBL4 (REC)OUT

 

IN

 

 

AUDIO

R

 

 

 

VCR

 

 

OUTPUT

 

DVD

3 MAIN

 

OUT

 

AM

 

 

 

 

 

 

 

ANT

OPTICAL HTR-5650

MD/CD-R 2 SURROUND

 

 

 

GND

OUTPUT

O

 

 

 

 

 

 

 

 

 

 

VIDEO

S VIDEO

 

75Ω UNBAL.

CD recorder or

 

O

 

 

 

FM

MD recorder

OPTICAL

MD/CD-R 1

SUB

SUB

ANT

 

WOOFER CENTER

WOOFER

MONITOR OUT

 

INPUT

HTR-5650

OPTICAL

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL

6CH INPUT

OUTPUT

 

 

 

 

OUTPUT

 

L

AUDIO R

INPUT

L

R

C

O

indicates signal direction indicates left analog cables indicates right analog cables indicates coaxial cables indicates optical cables

12

FM/AM
50kHz/9kHz
100kHz/10kHz
FREQUENCY
STEP

CONNECTIONS

Connecting the antennas

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength.

Connect each antenna correctly to the designated terminals.

AM loop antenna

Indoor FM

(included)

antenna

 

(included)

TUNER

AM

ANT

GND

75Ω UNBAL.

FM

ANT

Ground (GND terminal)

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

 

75-ohm/300-ohm antenna adapter (U.K. model only)

1

2

 

 

 

11

(7/16)

 

 

8

(5/16)

Unit:

 

6

(1/14)

mm (inch)

Open the cover of the included 75-ohm/300-ohm antenna adapter.

3

Lead wire

Cut the external sleeve of the 75-ohm coaxial cable and prepare it for connection.

Cut the lead wire and remove it.

4

 

5

Clamp

Clamp with

 

with

pliers.

 

pliers.

 

 

 

Insert the wire

Snap the cover into

 

into the slot.

place.

Insert the cable wire into the

 

slot, and clamp it with pliers.

 

Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it to the terminals on this unit.

2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals.

3 Orient the AM loop antenna for the best reception.

Notes

The AM loop antenna should be placed away from this unit.

The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.

FREQUENCY STEP switch (China and General models only)

Because the inter-station frequency

spacing differs in different areas, set the

FREQUENCY STEP switch (located on the rear panel) according to the frequency spacing in your area.

North, Central and South America: 100 kHz/10 kHz

Other areas: 50 kHz/9 kHz

Before setting this switch, disconnect the AC power plug of this unit from the AC outlet.

PREPARATION

English

13

CONNECTIONS

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURROUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a DVD/SACD player.

MAIN

OUT

SURROUND

 

 

VIDEO

S VIDEO

SUB

SUB

MONITOR OUT

WOOFER CENTER

WOOFER

6CH INPUT

OUTPUT

L

R

L R

CENTER

SURROUND

 

SUBWOOFER

MAIN

 

DVD/SACD player

Note

When you select 6CH INPUT as the input source, the unit automatically turns off the digital sound field processor, and you cannot use DSP programs.

14

Connecting the speakers

Speakers

This unit has been designed to provide the best soundfield quality with a 6-speaker system, using main left and right speakers, rear left and right speakers, a center speaker, and a rear center speaker. If you use different brands of speakers (with different tonal qualities) in your system, the tone of a moving human voice and other types of sound may not shift smoothly. We recommend that you use speakers from the same manufacturer or speakers with the same tonal quality.

The main speakers are used for the main source sound plus effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for effect and surround sounds. The center speaker is for the center sounds (dialog, vocals, etc.). The rear center speaker supplements the rear (left and right) speakers and provides for more realistic front-to-back transitions.

The main speakers should be high-performance models and have enough power-handling capacity to accept the maximum output of your audio system. The other speakers do not have to be equal to the main speakers. For precise sound localization, however, it is ideal to use the models of equivalent performance with the main speakers.

Use of a subwoofer expands your sound field

It is also possible to further expand your system with the addition of a subwoofer. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE (low-frequency effect) channel with high fidelity when playing back Dolby Digital or DTS signals. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction.

CONNECTIONS

Speaker placement

Refer to the following diagram when you place the speakers.

Center speaker

Main speaker (R)

Rear speaker (R)

Subwoofer

Main

1.8 m (6 feet)

speaker (L)

Rear center speaker

Rear speaker (L)

Main speakers

Place the main left and right speakers an equal distance from the ideal listening position. The distance between each speaker and each side of the video monitor should also be the same.

Center speaker

Align the front face of the center speaker with the front face of your video monitor. Place the speaker as close to the monitor as possible (such as directly over or under the monitor) and centrally between the main speakers.

Rear speakers

Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 feet) above the floor.

Rear center speaker

Place the rear center speaker in the center between the rear left and right speakers at the same height from the floor as the rear speakers.

Subwoofer

The position of the subwoofer is not so critical, because low bass sounds are not highly directional. However, it is better to place the subwoofer near the main speakers. Turn it slightly toward the center of the room to reduce wall reflections.

Note

If you do not use any of effect speakers (rear, center and/or rear center), change the settings of “SOUND 1 SPEAKER SET” items at the set menu to direct signals to other terminals you have connected speakers to.

CAUTION

Use magnetically shielded speakers. If these speakers still create interference with the monitor, place the speakers away from the monitor.

PREPARATION

English

15

CONNECTIONS

Connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

Use speakers with the specified impedance shown on the rear panel of this unit.

Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/ or the speakers.

10 mm (3/8”)

1

2

 

4

Red: positive (+)

3

 

Black: negative (–)

 

5

Banana plug

(With the exception of U.K. and Europe models)

A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps with a stripe, groove or ridge.

1 Remove approximately 10 mm (3/8”) of insulation from each of the speaker cables.

2 Twist the exposed wires of the cable together to prevent short circuits.

3 Unscrew the knob.

4 Insert one bare wire into the hole in the side of each terminal.

5 Tighten the knob to secure the wire.

y

(With the exception of U.K. and Europe models)

You can also use banana plug connectors. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

IMPEDANCE SELECTOR switch

WARNING

Do not change setting of the IMPEDANCE SELECTOR switch when the unit power is switched on, as doing so may damage the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If this is the case, slide the switch all the way to either position when this unit is in standby mode. Be sure to move this switch only when this unit is in standby mode.

Select the switch position (left or right) according to the impedance of the speakers in your system.

 

 

(General model)

Switch

Speaker

Impedance level

 

 

 

 

 

 

 

 

position

 

 

 

 

 

 

 

Main

If you use one/two set(s) of main speakers, the impedance of

 

 

 

 

Left

 

each speaker must be 4 Ω/8 Ω or higher.

 

 

 

 

Center,

The impedance of each speaker must be 6 Ω or higher.

 

 

 

 

 

 

 

 

 

 

Rear Center,

 

 

 

 

 

 

Rear

 

 

SET BEFORE POWER ON

 

Main*

If you use one/two set(s) of main speakers, the impedance of

 

IMPEDANCE SELECTOR

 

 

each speaker must be 8 Ω/16 Ω or higher.

 

A+B : 8ΩMIN. /SPEAKER

 

A+B : 16ΩMIN. /SPEAKER

 

 

MAIN A OR B : 4ΩMIN. /SPEAKER

MAIN A OR B : 8ΩMIN. /SPEAKER

 

 

 

CENTER

: 6ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER

Right

 

 

REAR CENTER: 6ΩMIN. /SPEAKER

REAR CENTER: 8ΩMIN. /SPEAKER

 

 

REAR

: 6ΩMIN. /SPEAKER

REAR

: 8ΩMIN. /SPEAKER

 

 

 

 

 

 

 

 

Center,

The impedance of each speaker must be 8 Ω or higher.

 

 

 

 

 

Rear Center,

 

 

 

 

 

 

Rear

 

 

* [Canada model only]

IMPEDANCE SELECTOR

When the switch is set to right, you cannot use “A+B”.

switch

 

16

Loading...
+ 46 hidden pages