Yamaha AX-390 User Manual

0 (0)
Yamaha AX-390 User Manual

AX-390

Natural Sound Stereo Integrated Amplifier

Préampli/ampli de puissance stéréo de la série “Natural Sound”

Natural Sound Stereo-Verstärker

Natural Sound Integrerad Stereo Förstärkare

Amplificatore integrato stereo a Suono Naturale

Amplificador integrado estéreo de Sonido Natural

Natural Sound Geïntegreerde Stereo Versterker

OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING

SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHÖRTEILE MEDFÖLJANDE TILLBEHÖR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES

After unpacking, check that the following parts are included.

Après le déballage, vérifier que les pièces suivantes sont incluses.

Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.

Kontrollera efter det apparaten packats upp att följande delar finns med.

Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.

Desembale el aparato y verificar que los siguientes accesorios están en la caja.

Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.

Remote Control Transmitter

Batteries (size AA, R6, UM-3)

Emetteur de télécommande

Piles (taille AA, R6, UM-3)

Fernbedienungsgeber

Batterien (Größe AA, R6, UM-3)

Fjärrkontrollsändare

Batterier (storlek AA, R6, UM-3)

Telecomando

Batterie (dimensioni AA, R6, UM-3)

Transmisor del control remoto

Pilas (tamaño AA, R6, UM-3)

Afstandbediening

Batterijen (maat AA, R6, UM-3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This product complies with the radio frequency interference requirements of the Council Directive 82/499/EEC and/or 87/308/EEC.

Cet appareil est conforme aux prescriptions de la directive communautaire 87/308/CEE.

Diese Geräte entsprechen der EG-Richtlinie 82/499/EWG und/oder 87/308/EWG.

Dette apparat overholder det gaeldende EF-direktiv vedrørende radiostøj.

Questo apparecchio è conforme al D.M.13 aprile 1989 (Direttiva CEE/87/308) sulla soppressione dei radiodisturbi.

Este producto está de acuerdo con los requisitos sobre interferencias de radio frequencia fijados por el Consejo Directivo 87/308 CEE.

Dit product voldoet aan de EEG normen betreffende radio-frekwentie storingen 82/499/EEG en/of 87/308/EEG.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.

Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

Special Instructions for U.K. Model

IMPORTANT

THE WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Make sure that neither core is connected to the earth terminal of the three pin plug.

2

Thank you for selecting this YAMAHA stereo amplifier.

FEATURES

60W + 60W (8Ω ) RMS Output Power, 0.04% THD,

 

20–20,000 Hz

High Dynamic Power, Low Impedance Drive Capability

Continuously Variable Loudness Control

CD DIRECT AMP Switch to Reproduce the Purest CD Sound

Remote Control Capability

CONTENTS

 

Supplied Accessories .....................................................

2

Caution ...........................................................................

3

Controls and Their Functions .........................................

4

Connections ...................................................................

6

Basic Operations ............................................................

8

Notes about the Remote Control Transmitter................

11

Troubleshooting ............................................................

12

Specifications ...............................................................

13

English

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1.To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2.Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water.

3.Never open the cabinet. If something drops into the set, contact your dealer.

4.Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves.

5.The openings on the cabinet assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the cabinet will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in well-ventilated condition. Make sure to allow a space of at least 10 cm behind, on the both sides and above the top panel of the unit. Otherwise it may not only damage the unit, but also cause fire.

6.Always set the VOLUME control to “– ” before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started.

7.Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

8.Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty.

9.When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet.

10.To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm.

11.Grounding or polarization – Precautions should be taken so that the grounding or polarization of an appliance is not defeated.

12.AC outlet

Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide.

13.Voltage Selector (General Model only)

The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.

Voltages are 110/120/220/240V AC, 50/60 Hz.

IMPORTANT

Please record the serial number of this unit in the space below.

Serial No.:

The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.

3

CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

 

 

 

 

 

 

1 2

 

3

 

4

 

 

 

5

 

NATURAL SOUND STEREO AMPLIFIER AX-390

 

 

 

 

 

 

POWER

 

 

MONITOR

 

 

 

 

CD DIRECT

 

TAPE 2

TAPE 1

AUX

PHONO

TUNER

CD

 

 

AMP

 

 

 

COPY

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME

 

 

BASS

 

TREBLE

BALANCE

 

LOUDNESS

 

PHONES

SPEAKERS

 

 

 

 

 

 

 

A

B

 

 

 

 

 

 

 

ON

ON

 

 

 

 

 

 

 

OFF

OFF

 

 

 

 

 

 

6

7

8

 

9

 

0

A

1POWER switch

 

 

7SPEAKERS switches

 

 

Press this switch to switch the power on. Press it again to switch the power off.

*Standby mode <Europe and U.K. models only>

While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the standby mode. (In this mode, the power indicator is half illuminated.)

2Power indicator

Lights up while the power is on.

3Remote control sensor

Receives signals from the remote control transmitter.

4Input selector buttons and indicators

Select a program source to listen to. The indicator above the selected button (source) will light up.

5 CD DIRECT AMP switch

Press this switch inward to listen to a CD source in the purest sound. (Refer to page 10 for details.)

6PHONES jack

When you listen with headphones, connect the headphones to

the PHONES jack. When listening with

PHONES

headphones privately, set both the

 

SPEAKERS A and B switches to the

 

OFF position.

 

Set the switch A or B (or both A and B) for the speaker system (connected to this unit) you will use to the ON position. Set the switch for the speaker system you will not use to the OFF position.

8Tone controls BASS

Used to increase or decrease the low frequency response. The 0 position produces flat response.

TREBLE

Used to increase or decrease the high frequency response. The 0 position produces flat response.

9BALANCE control

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

0Continuously variable LOUDNESS control

Used to compensate for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume.

AVOLUME control

Used to raise or lower the volume level.

4

REMOTE CONTROL TRANSMITTER

The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player, tuner and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this remote control transmitter will also control various functions of each component.

For Control of This Unit

1Input selector keys

Selects input source.

2VOLUME +/– keys

Turns the volume level up/down.

 

YAMAHA HIFI SYSTEM

 

 

 

REMOTE CONTROL TRANSMITTER

3POWER key

 

 

 

 

 

 

Turns the power on/off.

 

 

AUX

*

<Europe and U.K. models only>

 

 

 

1

DIR A DIR B REC/PAUSE PLAY

TAPE 2

 

While the power is on, pressing the POWER key on the

A/B

TAPE 1

 

remote control transmitter switches the unit from the

 

 

power-on mode to the standby mode, and vice versa. (In

 

 

 

 

2

PRESET + A/B/C/D/E

TUNER

1

the standby mode, the power indicator on the front panel is

 

 

 

half illuminated.)

DISC

PLAY

CD

3

 

PHONO

POWER

VOLUME

For Other Component Control

 

2

Identify the remote control transmitter keys with your

 

component’s keys. If these keys are identical, their functions

 

will be the same. On each key function, refer to the

3corresponding instruction on your component’s manual.

1Tape deck keys

Controls tape deck.

*DIR A, B and A/B are applicable only to double cassette tape deck.

*For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running.

2Tuner keys

Controls tuner.

+: Selects higher preset station number.

: Selects lower preset station number.

A/B/C/D/E Selects the group (A – E) of preset station numbers.

3CD player keys

Controls compact disc player.

*

DISC is applicable only to compact disc changer.

 

English

5

Loading...
+ 9 hidden pages