Global Water
800-876-1172 • globalw.com
Global Water
Instrumentation, Inc.
151 Graham Road
P.O. Box 9010
College Station, TX 77842-9010
T: 800-876-1172
Int’l: (979) 690-5560, F: (979) 690-0440
Water Alarm Sensor: WA600
Publication Number 38310112
- 1 -
Global Water
800-876-1172 • globalw.com
Congratulations on your purchase of the Global Water WA600
Water Alarm Sensor. This instrument has been quality tested and
approved for providing accurate and reliable measurements. We
are confident that you will find the WA600 to be a valuable asset
for your application. Should you require assistance, our technical
staff will be happy to help.
Table of Contents
I. Checklist • • • • • • • Page 3
II. Inspection
III. Water Alarm Sensor Installation
IV. Maintenance
V. Troubleshooting
VI. Warranty
* Copyright Global Water Instrumentation, I nc. 2008
• • • • • • • 6
• • • • • • 3
• • • 4
• • • • • • 4
• • • • • • 5
- 2 -
I. WA600 Checklist
a. Water Alarm Sensor
b. WA600 Manual
II. Inspection
a. Your WA600 unit was carefully inspected and cer tified by our Quality
Assurance Team before shipping. If any damage has occurred during
shipping, please notify Global W ater Instrumentation, Inc. and file a
claim with the carrier involved.
Use the checklist to ensure that you hav e r ec eived every thing needed
to operate the WA600.
Global Water
800-876-1172 • globalw.com
- 3 -
Global Water
800-876-1172 • globalw.com
III. Water Alarm Sensor Installation
a. Water Alarm Sensor specifications .
Output: Contact Closure (Green and White wires )
Operating Voltage: 10-36VDC
Operating Temperature: -40° to +55°C
Size of Probe: 1" diameter x 5" long
Weight: 1/2 lb.
b. Position the Water Alarm Sens or ’s ex pos ed metal pins at the level
where the sensor should alarm.
c. Do not install the WA600 in applications that contain solvents.
Over time, many solvents can deteriorate the cable.
d. The Water Alarm Sensor is a four-wire sensor. Connect the black w ir e
to ground. The green and white wires form two halves of a circuit.
When water bridges the pins on the end of the sensor it c om pletes the
circuit, acting as a switch. The red wire is positive voltage. Warning:
Always connect the sensor with the power turned of f.
IV. Maintenance
a. The sensor must be cleaned periodically. The suggested cleaning rate
depends on the installation area and how oft en it contacts the water.
In dirty areas the sensor should be cleaned mo nthly. In a clean area
they can be cleaned yearly. The sensor can be cleaned using water
and liquid dish soap. A small amount of bleach can be added if there
appears to be algae growth. Metal contac t pins s hould be c leaned
with a bristle brush, soap, and water.
- 4 -
V. Trouble Shooting
Issue: Water Alarm Sensor not operati ng cor re c tly
a. Verify power source is supplying correc t voltage.
b. Clean the metal contact pins.
Other issues
c. C all us for tech support: 800-876-1172 or 979-690-5560 (many
problems can be solved over the phone). Fax: 979-690-0440 or Email:
globalw@globalw.com.
Be prepared to describe the problem you are experiencing including
specific details of the application and installation and any additional
pertinent information.
d. In the event that the equipment needs to be returned to the factory for
any reason, please call to obtain an RMA# (Return M aterial
authorization). Do not return item s without an RMA# displayed on the
outside of the package.
Clean and decontaminate the WA600 if necessary.
Include a written statement describing the problems.
Send the package with shipping prepaid to our factory address. Insure
your shipment, as the warranty does not c ov er damage incur r ed dur ing
transit.
e. When calling for tech support, pleas e hav e the following information
ready;
1. Model #.
2. Unit serial number.
3. P.O.# the equipment was purchased on.
4. Our sales number or the invoice number.
5. Repair instructions and/or specific problems relating to the
product.
Global Water
800-876-1172 • globalw.com
- 5 -
VI. Warranty
a. Global Water Instrumentation, Inc. warrants that its products are free
from defects in material and workmanship under normal use and
service for a period of one year from date of shipment from factory.
Global Water’s obligations under this w ar r anty are limited to, at Global
Water’s option: (I) replacing or (II) repairing; any products determined
to be defective. In no case shall Global Water ’s liability exceed the
products original purchase price. This w ar r anty does not apply to any
equipment that has been repaired or altered, except by Global Water
Instrumentation, Inc., or which has been s ubjec t to misuse, negligence
or accident. It is expressly agreed that this warranty will be in lieu of
all warranties of fitness and in lieu of the warr anty of merchantability.
b. The warranty begins on the date of your invoic e.
Global Water
800-876-1172 • globalw.com
- 6 -
Loading...