SDS120.qxd 18/6/03 3:41 pm Page 1
AC/DC U-Channel
|
|
|
|
120 Watts |
XPiQ inc. |
||
SDS120 Series |
Intelligent Design Quality Product |
||
|
|
||
|
|
|
|
• |
Active PFC - Meets EN61000-3-2, -3 |
|
|
|
|
• |
|
|
|
PRELIMINARY |
|
|
|
Small Size 3.2” x 5.0” x 1.54” |
|
|
|
• |
|
|
|
Single & Triple Outputs |
|
|
|
• |
|
|
|
Overvoltage & Overcurrent2003Protection |
|
|
|
Q3 • |
|
|
|
Power Fail Detect |
|
|
|
• |
|
|
|
International Safety Approvals |
|
|
|
|
|
Specification
Input
AC Input Voltage |
• |
90-264 VAC |
|
Input Frequency |
• |
47-63 Hz |
|
Power Factor |
• |
0.97 typical |
|
Inrush Current |
• |
15 |
A max at 115 VAC, |
|
|
30 |
A max at 230 VAC |
Input Current |
• |
1.7 |
A max at 115 VAC, |
|
|
1.0 |
A max at 230 VAC |
Output
General
Efficiency |
• |
80% typical |
|
Power Density |
• |
4.87 W/in3 |
|
Isolation Voltage |
• 3000 |
VAC Input to Output |
|
|
|
1500 |
VAC Input to Ground |
|
|
500 VAC Output to Ground |
|
Signals |
• Power Fail Detect - Fail = TTL low |
||
Size |
• 5.00” x 3.20” x 1.54” for U-Channel |
||
Weight |
• |
450-550 grams approx. |
Output Voltage |
• |
See Table |
Output Power |
• |
120 Watts |
Output Voltage |
• Fixed, not user adjustable |
|
Adjustment |
|
|
Minimum Load |
• 0 minimum load required for single |
|
|
|
output models. See table for |
|
|
multi output models. |
Line Regulation |
• |
±1% maximum |
Load Regulation |
• |
±5% maximum |
Ripple & Noise |
• |
2% peak-peak maximum |
Transient Response |
• 4% max deviation, 500 µs |
|
|
|
recovery time for a 50% load change |
Temperature |
• |
±0.04% per °C |
Coefficient |
|
|
Hold Up Time |
• |
>16 ms minimum |
Overvoltage |
• On all outputs 112% to 132% |
|
Protection |
|
with recycle input to reset |
Overcurrent |
• On all outputs 110% to 150% |
|
Protection |
|
with auto recovery |
Environmental
Operating |
• 0° C to 70 °C |
Temperature |
Derate linearly from 100% load at |
|
50 °C to 50% load at 70°C |
Cooling |
• Convection cooled |
Humidity |
• 5% to 95% RH, non-condensing |
Storage |
• -40 °C to +85 °C |
Temperature |
|
EMC & Safety
Safety Approvals |
• UL60950, CSA C60950 per cUL |
|
|
|
EN60950, CE Mark LVD |
EMI/EMC |
• |
Meets EN61000-3-2, -3, |
|
|
EN55022, CISPR22 Class B |
|
|
and FCC Level B conducted |
Immunity & Surge |
• |
Meets EN61000-4-2, -3, -4, -5 |
* Preliminary datasheet - see website for current specs
• |
|
PH: 508 |
429.9883 |
• |
|
|
|||||
|
|||||
|
|
|
FAX: 800 |
226.2100 |
|
15 www.XPiQ.com |
|
|
Email: sales@xpiq.com |
|
|
|
|
Holliston, MA 01746 USA |
|
||
|
|
|
|||
|
|
|