XL-2031IDW
USER S MANUAL
MAIN DIAGRAM
Handset
Coil Cord
Speaker
Ringer
Volume
Volume
(HI/LO)
(HI/LO)
Switch
Switch
Hook Switch
Speaker
1
ghi
4
pqrs
Line Cord
Battery
Compartment
Jack For Coil Cord
new
set
store
mute
abc
jkl
7
tuv
0
In Use Indicator
TROUBLESHOOTING
If you have problems with your phone, please check below
LCD Display
m1
NEW Call and
NEW Message
m2
auto
def
3
2
mno
6
5
wxyz
9
8
Indicator
m3
m4
m5
m6
phone
dial
del
book
rd/p
R
BLANK OR
FAINT
SCREEN
CALLER ID
WILL NOT
WORK
PROPERLY
PHONE
WILL NOT
RING
NO DIAL
TONE
NO DATA
SENT
for helpful hints:
l
Check the line cord. Connect Telephone Cord. Check
batteries, Check adaptor.
l
Call your telephone company to verify that your Caller ID
services are active.
You may have too many communication devices hooked
l
to a single line. A communication device can be a phone,
modem or facsimile (FAX) machine. Contact your
telephone company for help in calculating the limit for
your residence or business line.
l
Verify that the LINE CORD is plugged in correctly .
l
Verify that the Line Cord connection is correct and tightly
secured.
l
Call your telephone company to verify that your caller ID
services are active.
l
If you have an answering machine connected to this
Phone, ensure that your answering machine is set to
answer after at least two rings.
l
You answer the call before two rings.
Contact your telephone company if the problem
l
continues for more than 24 hours. The telephone
company may be experience temporary line.
Adapter
Jack For Line Cord
Socket
NO RESPONSE ON
LCD DISPLAY
l
If you have experienced a power failure when using
optional AC adaptor, the batteries for memory back up
could become weak or dead. If the power is restored and
the display screen does not respond then you must
replace the batteries with new.
20
Or
1.
Select the caller that you want to call back by pressing
button in the on- hook state.
2.
Pick up the handset or press button,then the number will be
s or t
dialled out automatically.
4. Save the Caller ID records
Your phone stores minimum 76 call records before the memory
becomes full. When the next call comes in, the oldest record
automatically drops off to make room for the new call records.
5. Delete single or all Caller ID or dialled number(s)
In the state of on-hook,find out the Caller ID or dialled number you
want to remove, press del button , the LCD will show DEL? and then
press del button again to remove this number, press other button to
exit. If press and hold del button for about 6 seconds, the LCD will
show ALL DEL? , press del button to confirm and exit.
TABLE OF CONTENTS
FEATURE LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . 2
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FUNCTION BUTTONS . .. . . . . . . . . . . . . . . . . . . . . . . 4
FUNCTION OPERATIONS . . . . . . . . . . . . . . . . . . . . . . 6
OPERATION ABOUT THE STORED NUMBERS . . . . . . . . . 13
RECEIVING CALL RECORDS . . . . . . . . . . . . . . . . . . . . .15
REVIEWING DISPLAY MESSAGES . . . . . . . . . . . . . . . . . 15
MESSAGE WAITING
NO CALLS
TOTAL & NEW CALLS
PRIVATE
REPEAT CALLS
END OF LIST
OUT OF AREA
BATTERY LOW INDICATOR
CALLER ID ON CALL WAITING . . . . . . . . . . . . . . . . . . .17
CALLER ID SYSTEM OPERATIONS . . . . . . . . . . . . . . . . .18
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . .20
19
FEATURE LIST
1. FSK + DTMF dual system caller ID
2. Stores minimum 76 incoming calls name & number,
date & time
3. Stores up to 10 outgoing calls number
4. Stores up to 70 names & numbers in phone book
5. Caller ID with matching ringer melody and back light
6. LCD displays calling name & number
7. Call back function
8. Delete individual or all records
9. Real time clock(Set time)
10. New call indicator
11. Area & long distance code setting
12. Languages select
13. Message waiting function
14. Caller ID on call waiting
15. Last number redial
16. Speakerphone
17 10 two-touch memories
18. 6 one-touch memories
19. R, Mute, Pause
20. Timer
Subscription to Caller ID service from your local phone company is
required before the first use.
1. New call indicator
The red indicator light of your phone will flash to indicate that you
have new calls and it will flash until all the new calls have been
reviewed.
2. Review your call records
Press s button to browse through the caller list. If the call is more
than 13 digits, the arrow will show on the bo ttom right of LCD, press s
or t or t
button once to review the other digits, press s button again
to review next call. At the end of the call record list, you will see the
END OF LIST message. Press s button to continue.
3. Using the call back feature
(NOTE: If the number is blocked or is not available, it can not be call
backed.)
A. Call back the dialled number: The unit can store up to 10 dialled
numbers.
1.
In the state of on-hook, press dial utton once, the last dialled
number will show on the LCD, then use button to select the
number that you want to dial out.
Pick up the handset or press button, the phone number can be
2.
dialled out automatically.
B. Call back the called number: The unit can store minimum 76
called numbers.
Lift the handset or press button, listen for a dial tone.
1.
Select the caller that you want to call back by pressing
2.
button.
Press dial button to automatically dial the phone number shows on
3.
the LCD.
CALLER ID SYSTEM OPERATIONS
or t
or t
b
s or t
s
or t
1
18
Loading...