Xantrex Technology XDC 60-100SL, XDC 30-200SL, XDC 40-150SL, XDC 100-60SL, XDC 10-600SL User Manual

...
0 (0)
Xantrex Technology XDC 60-100SL, XDC 30-200SL, XDC 40-150SL, XDC 100-60SL, XDC 10-600SL User Manual

TM-XDSL-01XN.book Page i Tuesday, November 5, 2002 3:22 PM

XDC 10-600SL

XDC 20-300SL

XDC 30-200SL

XDC 40-150SL

XDC 60-100SL

XDC 80-75SL

XDC 100-60SL

XDC 150-40SL

XDC 300-20SL

XDC 600-10SL

Operating Manual

XDC 6000 Watt Series

Slave Power Supply

TM-XDSL-01XN.book Page ii Tuesday, November 5, 2002 3:22 PM

TM-XDSL-01XN.book Page i Tuesday, November 5, 2002 3:22 PM

Operating Manual for

XDC 6000 Watt Series

Slave Power Supply

TM-XDSL-01XN.book Page ii Tuesday, November 5, 2002 3:22 PM

Limited

Warranty

What does this warranty cover and how long does it last?

This Limited Warranty is provided by Xantrex Technology, Inc. (“Xantrex”) and covers defects in workmanship and materials in your XDC 6000 Watt Series Slave Power Supply. This warranty lasts for a Warranty Period of 5 years from the date of purchase at point of sale to you, the original end user customer.

What will Xantrex do?

Xantrex will, at its option, repair or replace the defective product free of charge, provided that you notify Xantrex of the product defect within the Warranty Period, and provided that Xantrex through inspection establishes the existence of such a defect and that it is covered by this Limited Warranty.

Xantrex will, at its option, use new and/or reconditioned parts in performing warranty repair and building replacement products. Xantrex reserves the right to use parts or products of original or improved design in the repair or replacement. If Xantrex repairs or replaces a product, its warranty continues for the remaining portion of the original Warranty Period or 90 days from the date of the return shipment to the customer, whichever is greater. All replaced products and all parts removed from repaired products become the property of Xantrex.

Xantrex covers both parts and labor necessary to repair the product, and return shipment to the customer via a Xantrex-selected non-expedited surface freight within the contiguous United States and Canada. Alaska and Hawaii are excluded. Contact Xantrex Customer Service for details on freight policy for return shipments outside of the contiguous United States and Canada.

How do you get service?

If your product requires troubleshooting or warranty service, contact your merchant. If you are unable to contact your merchant, or the merchant is unable to provide service, contact Xantrex directly at:

Phone:

604 422 2777

Toll Free North America:

1 800 670 0707

Fax:

604 420 2145

Email:

customerservice@xantrex.com

ii

Operating Manual for XDC Series Slave Power Supply

TM-XDSL-01XN.book Page iii Tuesday, November 5, 2002 3:22 PM

Direct returns may be performed according to the Xantrex Return Material Authorization Policy described in your front panel controlled XDC product manual. For some products, Xantrex maintains a network of regional Authorized Service Centers. Call Xantrex or check our website to see if your product can be repaired at one of these facilities.

In any warranty claim, dated proof of purchase must accompany the product and the product must not have been disassembled or modified without prior written authorization by Xantrex.

Proof of purchase may be in any one of the following forms:

The dated purchase receipt from the original purchase of the product at point of sale to the end user, or

The dated dealer invoice or purchase receipt showing original equipment manufacturer (OEM) status, or

The dated invoice or purchase receipt showing the product exchanged under warranty

What does this warranty not cover?

This Limited Warranty does not cover normal wear and tear of the product or costs related to the removal, installation, or troubleshooting of the customer’s electrical systems. This warranty does not apply to and Xantrex will not be responsible for any defect in or damage to:

a.the product if it has been misused, neglected, improperly installed, physically damaged or altered, either internally or externally, or damaged from improper use or use in an unsuitable environment;

b.the product if it has been subjected to fire, water, generalized corrosion, biological infestations, and high input voltage from lightning strikes;

c.the product if repairs have been done to it other than by Xantrex or its authorized service centers (hereafter “ASCs”);

d.the product if it is used as a component part of a product expressly warranted by another manufacturer;

e.the product if its original identification (trade-mark, serial number) markings have been defaced, altered, or removed.

Release 1.0

iii

TM-XDSL-01XN.book Page iv Tuesday, November 5, 2002 3:22 PM

Disclaimer Product

THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY XANTREX IN CONNECTION WITH YOUR XANTREX PRODUCT AND IS, WHERE PERMITTED BY LAW, IN LIEU OF ALL OTHER WARRANTIES, CONDITIONS, GUARANTEES, REPRESENTATIONS, OBLIGATIONS AND LIABILITIES, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE IN CONNECTION WITH THE PRODUCT, HOWEVER ARISING (WHETHER BY CONTRACT, TORT, NEGLIGENCE, PRINCIPLES OF MANUFACTURER’S LIABILITY, OPERATION OF LAW, CONDUCT, STATEMENT OR OTHERWISE), INCLUDING WITHOUT RESTRICTION ANY IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE TO THE EXTENT REQUIRED UNDER APPLICABLE LAW TO APPLY TO THE PRODUCT SHALL BE LIMITED IN DURATION TO THE PERIOD STIPULATED UNDER THIS LIMITED WARRANTY.

IN NO EVENT WILL XANTREX BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSSES, COSTS OR EXPENSES HOWEVER ARISING WHETHER IN CONTRACT OR TORT INCLUDING WITHOUT RESTRICTION ANY ECONOMIC LOSSES OF ANY KIND, ANY LOSS OR DAMAGE TO PROPERTY, ANY PERSONAL INJURY, ANY DAMAGE OR INJURY ARISING FROM OR AS A RESULT OF MISUSE OR ABUSE, OR THE INCORRECT INSTALLATION, INTEGRATION OR OPERATION OF THE PRODUCT.

Exclusions If this product is a consumer product, federal law does not allow an exclusion of implied warranties. To the extent you are entitled to implied warranties under federal law, to the extent permitted by applicable law they are limited to the duration of this Limited Warranty. Some states and provinces do not allow limitations or exclusions on implied warranties or on the duration of an implied warranty or on the limitation or exclusion of incidental or consequential damages, so the above limitation(s) or exclusion(s) may not apply to you. This Limited Warranty gives you specific legal rights. You may have other rights which may vary from state to state or province to province.

iv

Operating Manual for XDC Series Slave Power Supply

TM-XDSL-01XN.book Page v Tuesday, November 5, 2002 3:22 PM

Information WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, UNLESS SPECIFICALLY AGREED TO BY IT IN WRITING, XANTREX

a.MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN MANUALS OR

OTHER DOCUMENTATION PROVIDED BY IT IN CONNECTION WITH THE

PRODUCT; AND

b.ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT,

CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF

SUCH INFORMATION.

THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

WARNING: Limitations on Use

Information

About Your

Power

Supply

Please refer to your product user manual for limitations on uses of the product. Specifically, please note that this power supply is not intended for use in connection with life support systems and Xantrex makes no warranty or representation in connection with any use of the product for such purposes.

Xantrex Technology, Inc.

8999 Nelson Way

Burnaby, British Columbia

Canada V5A 4B5

Please record the following information when you first open your Power Supply package:

Model Number

______________________________________________

Serial Number

______________________________________________

Purchased From

______________________________________________

Purchase Date

______________________________________________

Release Release 1.0 (2002-09)

Copyright © 2002 Xantrex Technology Inc. All rights reserved.

Printed in Canada

Release 1.0

v

TM-XDSL-01XN.book Page vi Tuesday, November 5, 2002 3:22 PM

Warnings Warnings and cautions are defined and formatted in this manual as shown below. and

Cautions

WARNING

Describes a potential hazard which could result in injury or death, or, a procedure which, if not performed correctly, could result in injury or death.

CAUTION

Describes a procedure which, if not performed correctly, could result in damage to data, equipment, or systems.

Power

Supply

Safety

WARNING—High Energy and High Voltage

Exercise caution when using and calibrating a power supply. High energy levels can be stored at the output voltage terminals on a power supply in normal operation. In addition, potentially lethal voltages exist in the power circuit and on the output and sense connectors of a power supply with a rated output greater than 40 V. Filter capacitors store potentially dangerous energy for some time after power is removed.

CAUTION

Operate the power supply in an environment free of flammable gases or fumes. To ensure that the power supply’s safety features are not compromised, use the power supply as specified in this manual and do not substitute parts or make any unauthorized modifications. Contact the service technician for service and repair help. Repairs must be made by experienced service technicians only.

CAUTION

For Use as a Battery Charger

When you are using any of these power supplies for battery charging applications, it is essential to provide an appropriately sized fuse or circuit breaker in series between the power supply output and the battery.

Installation of a protector (fuse or DC circuit breaker) rated for about 115% of the maximum current rating of the power supply and designed specifically to interrupt the DC voltage of the battery, will provide adequate reverse polarity current protection. Where several power supplies are in parallel, it is best to fuse each one, rather than one large fuse for all.

vi

Operating Manual for XDC Series Slave Power Supply

TM-XDSL-01XN.book Page vii Tuesday, November 5, 2002 3:22 PM

Approvals CE Mark

CE-marked units meet the following standards:

IEC 1010-1-92 including Amendments 1 and 2:

Overvoltage Category II

Permanently Connected Equipment

Pollution Degree 2

EN50081-2-1996 Electromagnetic Generic Emission - Industrial Equivalent

EN50082-2-1995 Electromagnetic Compatibility Generic Immunity - Industrial Environment

CSA Certified

CSA C22.2 No. 1010.1-92

UL Listed (pending)

Meets UL3101-1 Electrical Equipment for Laboratory Use; Part 1: General

Requirements

General safety requirements for electrical equipment intended for professional, industrial process, and educational use, including equipment and computing devices for: measurement and test; control; laboratory use; and accessories intended for use with the above.

FCC Compliance

FCC Part 15 - Radio Frequency Devices - Class A Limits

Canadian EMC Requirements

The unit complies with Canadian EMC requirements of ICES-001.

Release 1.0

vii

TM-XDSL-01XN.book Page viii Tuesday, November 5, 2002 3:22 PM

viii

Operating Manual for XDC Series Slave Power Supply

TM-XDSL-01XN.book Page ix Tuesday, November 5, 2002 3:22 PM

About This Manual

This Operating Manual contains operating instructions for the XDC Series Slave power supplies. This power supply is based on the XDC Series of digital, programmable power supplies, with the same high level of accuracy and reliability, but specifically designed with no front panel interface for use as a slave unit controlled via CANbus (Control Area Network bus).

Who Should Use This Manual

This manual is designed for users who understand basic electrical theory, especially as applied to the operation of power supplies. This implies a recognition of constant voltage and constant current operating modes and the control of input and output power, as well as the observance of safe techniques while making connections to the supply and any changes in settings.

This manual is intended to be used in conjunction with the full digital front panel XDC Series Operating manual. If you do not plan to use this power supply in a system with a full digital front panel XDC Series power supply, please contact the manufacturer for additional application data.

Revisions

The current release of this manual is listed in the right-hand page footer. Insert pages may update already-printed manuals.

Release 1.0 (2002-09)

Release 1.0

ix

Loading...
+ 25 hidden pages