WTE TC2504, TC2503, TC2501, TC2502, TC2500 Datasheet

				WTE	TC2500 – TC2504
			POWER SEMICONDUCTORS
					25A 5/16" TIN CAN TYPE PRESS-FIT DIODE

Features

!Glass Passivated Die Construction

!Low Leakage

!Low Cost

!High Surge Current Capability

!Typical IR less than 10µA

D

Tin Can

Mechanical Data

Dim

Min

Max

A

8.70

8.75

C

B

6.35

6.40

!

Case: All Copper Case and Components

E

C

10.45

10.50

Hermetically Sealed

D

1.45

1.49

! Terminals: Contact Areas Readily Solderable

E

27.60

—

! Polarity: Cathode to Case(Reverse Units Are

B

All Dimensions in mm

Available Upon Request and Are Designated

By An “R” Suffix, i.e. TC2502R or TC2504R)

! Polarity: Red Color Equals Standard,

A

Black Color Equals Reverse Polarity

!

Mounting Position: Any

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified

Single Phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic		Symbol	TC2500	TC2501		TC2502		TC2503	TC2504	Unit
Peak Repetitive Reverse Voltage		VRRM
Working Peak Reverse Voltage		VRWM	50	100		200		300	400	V
DC Blocking Voltage		VR
RMS Reverse Voltage		VR(RMS)	35	70		140		210	280	V
Average Rectified Output Current	@TA = 150°C	IO			25					A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on		IFSM			400					A
rated load (JEDEC Method)
Forward Voltage	@IF = 50A	VFM			1.0					V
Peak Reverse Current	@TA = 25°C	IRM			10					µA
At Rated DC Blocking Voltage	@TA = 100°C				500
Typical Junction Capacitance (Note 1)		Cj			300					pF
Typical Thermal Resistance Junction to Case (Note 2)		R JC			1.0					K/W
Operating and Storage Temperature Range		TJ, TSTG			-65 to +175					°C

Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance: Junction to case, single side cooled.

TC2500 – TC2504

1 of 2

© 2002 Won-Top Electronics