WTE DD302, DD301S, DD301, DD306S, DD300 Datasheet

...
0 (0)
WTE DD302, DD301S, DD301, DD306S, DD300 Datasheet

 

 

 

 

WTE

DD300/S – DD306/S

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER SEMICONDUCTORS

30A 8.4mm/9.5mm DISH DIODE

 

 

 

 

 

Features

!Glass Passivated Die Construction

!

Low Leakage

 

 

!

Low Cost

 

C

 

!High Surge Current Capability

!

Low Forward

 

!

C-Band Terminal Construction

D

Mechanical Data

!Case: All Copper Case and Components Hermetically Sealed

!Terminals: Contact Areas Readily Solderable

!Polarity: Cathode to Case(Reverse Units Are Available Upon Request and Are Designated By An “R” Suffix, i.e. DD302R or DD304SR)

!Polarity: Red Color Equals Standard, Black Color Equals Reverse Polarity

!Mounting Position: Any

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8.4mm Dish

 

9.5mm Dish

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dim

 

Min

 

Max

 

Min

Max

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

8.35

 

8.45

9.50

9.72

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

2.0

 

2.16

2.0

2.16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

1.43

 

1.47

1.43

1.47

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

22.3

 

 

22.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

All Dimensions in mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“S” Suffix Designates 8.4mm Dish

No Suffix Designates 9.5mm Dish

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified

Single Phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic

 

Symbol

DD300/

DD301/

DD302/

 

DD303/

DD304/

DD305/

DD306/

Unit

 

 

 

S

S

S

 

S

S

S

S

 

Peak Repetitive Reverse Voltage

 

VRRM

 

 

 

 

 

 

 

 

 

Working Peak Reverse Voltage

 

VRWM

50

100

200

 

300

400

500

600

V

DC Blocking Voltage

 

VR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RMS Reverse Voltage

 

VR(RMS)

35

70

140

 

210

280

350

420

V

 

 

 

 

 

 

 

 

 

 

 

 

Average Rectified Output Current

@TA = 150°C

IO

 

 

 

30

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

Non-Repetitive Peak Forward Surge Current

 

 

 

 

 

 

 

 

 

 

8.3ms Single half sine-wave superimposed on

IFSM

 

 

 

400

 

 

 

A

rated load (JEDEC Method)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Forward Voltage

@IF = 30A

VFM

 

 

 

1.1

 

 

 

V

 

 

 

 

 

 

 

 

 

 

 

Peak Reverse Current

@TA = 25°C

IRM

 

 

 

100

 

 

 

µA

At Rated DC Blocking Voltage

@TA = 100°C

 

 

 

500

 

 

 

 

 

 

 

 

 

 

 

Typical Junction Capacitance (Note 1)

Cj

 

 

 

300

 

 

 

pF

 

 

 

 

 

 

 

 

 

 

 

Typical Thermal Resistance Junction to Case

R JC

 

 

 

1.0

 

 

 

K/W

(Note 2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating and Storage Temperature Range

TJ, TSTG

 

 

 

-65 to +175

 

 

°C

 

 

 

 

 

 

 

 

 

 

 

Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.

 

 

 

 

 

 

 

 

2. Thermal Resistance: Junction to case, single side cooled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DD300/S – DD306/S

 

 

1 of 2

 

 

 

 

© 2002 Won-Top Electronics

Loading...
+ 1 hidden pages