Wolf Cinema SDC-25 Product Sheet

SDC-25 Features

SDC-25

1080p LED Cinema Projector

• Advanced next-generation
1920 x 1080 [HD] DLP
light engine

• “Lamp-less” LED technology
achieves ~20% expanded color
gamut and extremely accurate
color balance

• 1,000 ANSI peak white
[calibrated], 500,000:1 native
CR performance

• Emitter life: 20,000 hours
[normal mode]

• E-VariScope™ for 2.35:1
viewing on constant height
screens [no anamorphic
lens required]

• Darbee

• Extended long throw optics

• Extensive CMS [Color

• Projector boasts dual HDMI 1.4a

• ProScaler features 4 HDMI 1.4a

• Two optional VariScope™ FX™

• RS-232 connectivity for home

• Ultra-quiet chassis design –

• RF-based 3D emitter and

• Optional ceiling bracket – model

®

Digital Video Presence

[DVP] Imaging Technologies

[1.5-2.89:1] with ample H+V
lens shift

management software]

inputs, Component, Composite
and PC inputs

inputs, 6 Analog video inputs,
2 HDMI outputs, 1 digital coax
audio output

[xed] anamorphic lens kits

automation systems

~25dB SPL @ 1 meter
[normal mode]

four [4] sets of active LCD 3D
glasses included

WC-PM-ML

®

SDC-25 “3D” LED Projection System

Imagine years of 2D and 3D viewing excellence and never having to endure a fading image,
or change out a projector lamp! The Wolf Cinema SDC-25 “lamp-less” home cinema projector
and cutting-edge ProScaler MK V video processor provides some of today’s most advanced
imaging performances, available anywhere and at any price.

The projector’s light engine and precision optics deliver razor sharp images via its single
1920 x 1080 (1080p) DLP chip set from Texas Instruments. But unlike most other single-chip
projection platforms, the SDC-25 has eliminated the traditional UHP lamp and color wheel:
this projector produces an image via three separate RGB (red, green, blue) high-current light
emitting diodes (LEDs). These LED emitter panels are superbly efficient light sources, with an
extremely wide color gamut that exceeds today’s HD standards by 20%. There’s no color wheel
involved and thus no visible “rainbow” artifacts or light flicker. And best of all is the extended
life of the LED panels: a typical UHP projector lamp must be replaced and recalibrated every
2000-3000 hours or so. The SDC-25’s LED panels are rated to deliver accurate light output for
approximately 20,000 hours of continuous use [normal mode]. The RGB emitter technology is
thus designed to deliver year after year of trouble-free viewing excellence, on screens as large
as 12-ft wide.

This 2D/3D ensemble comes with our all-new ProScaler MK V external video processor – a
rack-mountable video processor that delivers the ultimate in image fidelity, calibration accuracy
and operational flexibility. The ProScaler MK V boasts multiple analog and digital video inputs
for ease of component source selection, while incorporating numerous HD imaging advances:
the remarkable Darbee™ Digital Visual Presence (DVP™) technology for enhanced edge
detail, ultra-deep contrast performance and improved visual depth-of-field; an advanced
CMS control suite for precise color accuracy; and last but not least, our latest technology
wizardry known as E-VariScope™ – the ability to quickly select desired aspect ratios when
enjoying popular TV and film content on constant height, 2.35:1 wide CinemaScope
ratio screens – and all without the need for an external anamorphic lens [full anamorphic lens
support is also provided].

The result? A stunningly-bright image with breathtaking color renditions, deep black level
performances and razor-sharp edge detail. The SDC-25 is yet another exciting high-performance
home cinema projection solution from Wolf Cinema. Available early Q1 2014.

®

aspect

SDC-25

Specifications

SDC-25 Projector

®

Display Technology Advanced HD 1080p (1920 x 1080), DLP

Brightness 1000 ANSI lumens (calibrated)

Contrast Ratio 500,000:1

Motorized Zoom Lens 1.5-2.89:1 HD Lens

Lens Offsets Vertical: +/- 60, Horizontal: +/-10%

Lamp technology Three RGB LED emission panels

Emitter Lifespan 20,000 hours [typical, normal mode]

Noise Levels 25 dB (normal mode)

Video Inputs Primary Inputs: HDMI x 2 (1.4a 2D/3D), PC (1), Component (1), Composite (1)

Signals NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4.43MHz SECAM B/D/G/K/K1/L, 4.25/4.4MHz, 480i/p, 576i/p,

720p (50/60Hz), 1080i (50/60Hz), 1080p (50/60Hz)

Control IR; RS-232 (serial input – Dsub-9)

Outputs 12V triggers (2), 3D Sync (1)

Power Requirements AC 110V-220V 50/60Hz

Power Consumption 375W (standby <0.5W)

Dimensions (WxHxD) 14” x 6.4” x 17.4” (345 x 161.5 x 443 mm) (inc. feet)

Weight 15.4lb (7kg)

ProScaler MK V Video Processor

imaging technology by Texas Instruments

Inputs/Outputs 10 video inputs (4x HDMI 1.4a, 2 Component, 2 S-Video, 2 Composite), plus 2x HDMI 1.4a video outputs,

11 audio inputs (4x HDMI, 2 analog stereo, 2 optical, 3 digital COAX), plus 1 digital COAX audio output

Video Processing 10 bit scaling, 729 point (9 x 9 x 9) gamut correction,

Advanced ltering, MPEG mosquito noise, block artifact reduction,
Temporal noise reduction for SD/HD sources; multiple conguration memories per input,
Darbee™ Digital Visual Presence (DVP™) technology,

E-VariScope™ Enables 2.35:1 viewing on constant height screens [no anamorphic lens required]

Rack Mountable Rack mounting ears included

Control IR; RS-232 (serial Input – Dsub-9 x1), Wired IR format command input

Power Requirements Universal 110V-240V, 50/60Hz power supply included, output 12.0 VDC, 5.0A

Power consumption 25 Watts

Dimensions (WxHxD) 17” x 2” x 9.5” (1.75”H without feet) (431.8 x 50.8 x 241.3 mm)

Weight 8lb (3.6kg)

© 2013 Wolf Cinema

All features and specifications subject to change without notice.

®

is a registered trademark of Texas Instruments. All rights reserved.

DLP
VariScope, E-VariScope and RGBY are trademarks of Wolf Cinema.
Darbee and DVP are trademarks of DarbeeVision Inc.

800 Addison Street. Berkeley CA 94710

Tel: [phone] . Fax: [phone]

www.wolfcinema.com

Wolf Cinema