Wolf Cinema DLD-280FD Product Sheet

DLD-280FD Features

• BluHD™ Laser phosphor
illumination technology for
imaging excellence and
long-term reliability
[~20,000 hours]

D LD-280FD

Laser DLP® Projector

• Latest-generation single

0.65” DLP
by Texas Instruments™
[HD 1920 x 1080 resolution]

• 5000 ANSI peak white,
~2,000:1 native
CR performance

• Choice of four primary motorized
optics [> 5X screen width]

• Ample H+V offset capabilities
[+/- 120% Vertical,
+/- 30% Horizontal]

• Factory hand-calibrated for
viewing excellence

• ProScaler MK III Video inputs –
2 HDMI (SD/HD 1.4a),
one HDMI 1.4a video output

• Advanced 10-bit video
processing, multiple calibration
memories per input

• E- VariScope™ technology for

2.35:1 lm widescreen viewing
on constant height screens
(no anamorphic lens required)

• Three optional cinema-grade
VariScope anamorphic
lens assemblies
[two xed, one motorized]

• IR remote control included
plus RS-232 system control
capabilities

• Optional WC-PM-MS
ceiling mount assembly

®

technology

DLD-280FD Laser DLP® Projector

Introducing Wolf Cinema’s DLD-280FD breakthrough DLP® home cinema projector – featuring
our remarkable new BluHD™ Laser phosphor illumination technology for up to 20,000 hours
of imaging excellence!

Enjoy years of trouble-free performance without ever having to change out a lamp, or recalibrate
your system due to lamp changes over time. Our BluHD technology uses a high-output blue
laser as the primary light source, generating the three R-G-B primary colors by first shining
onto a special phosphor wheel, which when spinning creates yellow light. The yellow light is
broken down further into red and green primaries, which together with the diffused blue laser
light is directed onto an ultra-fast Texas Instruments DLP
the optics and onto your projection screen. The DLD-280FD system produces 5000 ANSI
peak white performance – a terrific high-powered solution for large dedicated home cinema
screens, or for those more challenging higher-ambient lighting room conditions. Four primary
optics choices permit placement up to and well beyond 5X screen width, and is eminently
suitable on screens up to 16-ft [~5 meters] in width.

The slim-line, rack-mountable Wolf Cinema ProScaler MK III video processor serves as the
advanced signal processing nexus for your video system. The processor renders all current SD
and HD sources with absolute precision, minimizing motion lag or undesired visual artifacts.
The ProScaler MK III boasts an advanced CMS calibration suite for accurate renderings, no
matter the source – enabling professionals and enthusiasts everywhere to achieve excellent
color accuracy and ultra-wide contrast levels in all viewing modes. Standard definition sources
(such as from DVDs and television broadcasts) are up-converted and displayed with improved
visual depth, dimension, and reality. Per-pixel video de-interlacing, 10 bit video processing,
MPEG mosquito / temporal and block artifact noise reduction provide vast improvements on
marginal HD and SD sources. Dual HDMI 1.4a inputs and a single HDMI 1.4a output provider
connectivity to the laser projector head.

®

HD chip set – then fired through

The ProScaler MK III also boasts our popular technology known as E-VariScope™: quick
access to viewing modes when enjoying popular TV and film content on constant height, 2.35:1
wide aspect ratio screens. E-VariScope brings you that immersive 2:35:1 CinemaScope™
widescreen experience while eliminating those unwanted top & bottom “black bars,” as
commonly experienced on smaller-width 16/9 screens – and all without the need for an
external anamorphic lens [yet full anamorphic lens support is also provided].

DLD-280FD

Specifications

DLD-280FD Laser HD Projection System

®

Display Technology Advanced HD 1080p (1920 x 1080), DLP

Illumination BluHD™ laser, ~20,000 hours (eco mode), 24/7 capabilities

Performance 5000 ANSI lumens, ~2,000:1 native contrast ratio

Noise Levels 34dB SPL (eco mode), 38 dB SPL (normal)

Inputs/Outputs 1 HDMI 1.4a, 1 DVI-D, 1 DisplayPort, 1 DB-15 [VGA] in/out, 1 Composite Video, 1 S-Video,

1 Component Video (Y/Pb/Pr), 2 USB (one each type A and B), RJ-45 RS-232

Signals NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4.43MHz SECAM B/D/G/K/K1/L, 4.25/4.4MHz, 480i/p, 576i/p,

720p (50/60Hz), 1080i (50/60Hz), 1080p (50/60Hz)

Offsets +/-120% vertical, +/-30% horizontal

Motorized Optics 0.95-1.20:1 Zoom, 1.25-1.50:1 Zoom

1.55-2.90:1 Zoom, 2.90-5.45:1 Zoom

Control IR; RS-232 (serial input – D sub-9), Ethernet (10/100) RJ-45

Power Requirements AC 110V-240V 50/60Hz

Power Consumption 520W (340W eco mode)

Dimensions (WxHxD) 18.4” x 7.5” x 19.9” (467 x 191 x 506 mm)

Weight 35 lb (15.9kg)

imaging technology by Texas Instruments™

ProScaler MK III Video Processor

Inputs/Outputs 2 HDMI 1.4a, 1 HDMI video outputs

Video Processing 10 bit scaling, 125 point (5x5x5) gamut correction

Advanced ltering, MPEG mosquito noise, block artifact reduction,
Temporal noise reduction for SD/HD sources; multiple conguration memories per input

E-VariScope™ Enables 2.35:1 viewing on constant height screens [no anamorphic lens required]

Rack Mountable Rack mounting ears included

Control IR; RS-232 (serial input – D sub-9), Wired IR format command input

Power Requirements Universal 110V-240V, 50/60Hz power supply included, output 5.0 VDC, 4.0A

Power consumption 13 Watts

Dimensions (WxHxD) 17” x 2” x 9.5” (1.75”H without feet) (431.8 x 50.8 x 241.3 mm)

Weight 7 lb (3.6kg)

All features and specifications subject to change without notice.
DLP® is a registered trademark of Texas Instruments. All rights reserved.
VariScope, E-VariScope and VariScope FX are trademarks of Wolf Cinema.

© 2014 Wolf Cinema

800 Addison Street. Berkeley CA 94710

Wolf Cinema

Tel: [phone] . Fax: [phone]

www.wolfcinema.com