Winegard HDA-200, HDA-100 User Manual

4.2 (6)
Winegard HDA-200, HDA-100 User Manual
RF
Output

®

Ultra Low Noise

Distribution Amplifiers

Winegard’s new HDA series of Distribution Amplifiers was designed to meet the market demand for a heavy duty, quality built, cost effective solution for the amplification and distribution of analog/digital broadcast signals from Off-Air and cable TV stations. Both the HDA-100 & HDA-200 are housed in an industrial grade, weather resistant enclosure. Each unit has an RF input, amplified RF output, and DC power insertion jack. Each amplifier also provides a 5-42 MHz 2-way bi-pass.

The Winegard HDA-100 is a single RF input, 15dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at -2 dB loss.

The HDA-200 has a single RF input, 24 dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The HDA-200 has 0-18 dB gain control and 20 dB “switchable” FM trap to eliminate those offending FM radio stations. These features, when combined with the 12 dB of amplified gain for the 2 way 5-42 MHz return path make the HDA200 a superior solution for the “Techno” savvy consumer.

See reverse side for typical power installations.

HDA-100 SPECIFICATIONS

HDA-100

Bandpass Forward ...............................

54-1000 MHz

Bandpass Reverse ...............................

5-42 MHz

Max Output per Channel (80 ch CATV) .....

+25 dBmV (Note 1)*

Max Output per Channel (16 ch off-air) ......

+40 dBmV (Note 2)**

Max Input per Channel (80 ch CATV) ........

+10 dBmV (Note 1)*

Max Input per Channel (16 ch off-air) .........

+25 dBmV (Note 2)**

Max Input Reverse Amp .......................

n/a

Gain .......................................................

15 dB

Gain Control ..........................................

n/a

Reverse Gain ........................................

-2 dB

Noise Figure ..........................................

3 dB

FM Trap .................................................

n/a

Operating Temp ....................................

-30° to 140° F

Power Supply Voltage ..........................

12VDC - 200 mA

Housing Dimensions .............................

4.90” W x 3.92” H x 1.5” D

Weight ...................................................

0.6 lbs.

Power

RF

Jack

Input

HDA-100

 

 

15 dB Gain

RF

 

54-1000 MHz

Output

 

-2 dB 2-Way Bi-pass

 

 

 

 

 

 

 

 

Power

RF

 

 

Jack

Input

HDA-200

24 dB Gain

54-1000 MHz

Variable gain Control 0-18 dB Switchable FM trap

+12 dB gain on 2-Way Bi-pass

HDA-200 SPECIFICATIONS

HDA-200

Bandpass Forward .............................

54-1000 MHz

Bandpass Reverse .............................

5-42 MHz

Max Output per Channel (80 ch CATV) ...

+25 dBmV (Note 1)*

Max Output per Channel (16 ch off-air) ....

+40 dBmV (Note 2)**

Max Input per Channel (80 ch CATV) ......

+8 dBmV (Note 1)*

Max Input per Channel (16 ch off-air) .......

+23 dBmV (Note 2)**

Max Input Reverse Amp .......................

+23 dBmV (at 1dB comp)

Gain .....................................................

24 dB

Gain Control ........................................

0-18 dB

Reverse Gain ......................................

+12 dB

Noise Figure ........................................

4.5 dB (at max gain)

FM Trap ...............................................

-20 dB (95-108 MHz)

Operating Temp ..................................

-30° to 140° F

Power Supply Voltage ........................

12VDC - 200 mA

Housing Dimensions ...........................

4.90” W x 3.92” H x 1.5” D

Weight .................................................

0.6 lbs.

*Note (1) at -62dB ctb, -56dB cso **Note (2) at -46dB cross modulation

Loading...
+ 1 hidden pages