®
Ultra Low Noise
Distribution Amplifiers
Winegard’s new HDA series of Distribution Amplifiers was designed to meet the market demand for a heavy duty, quality built, cost effective solution for the amplification and distribution of analog/digital broadcast signals from Off-Air and cable TV stations. Both the HDA-100 & HDA-200 are housed in an industrial grade, weather resistant enclosure. Each unit has an RF input, amplified RF output, and DC power insertion jack. Each amplifier also provides a 5-42 MHz 2-way bi-pass.
The Winegard HDA-100 is a single RF input, 15dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at -2 dB loss.
The HDA-200 has a single RF input, 24 dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The HDA-200 has 0-18 dB gain control and 20 dB “switchable” FM trap to eliminate those offending FM radio stations. These features, when combined with the 12 dB of amplified gain for the 2 way 5-42 MHz return path make the HDA200 a superior solution for the “Techno” savvy consumer.
See reverse side for typical power installations.
HDA-100 SPECIFICATIONS
HDA-100
Bandpass Forward ............................... |
54-1000 MHz |
Bandpass Reverse ............................... |
5-42 MHz |
Max Output per Channel (80 ch CATV) ..... |
+25 dBmV (Note 1)* |
Max Output per Channel (16 ch off-air) ...... |
+40 dBmV (Note 2)** |
Max Input per Channel (80 ch CATV) ........ |
+10 dBmV (Note 1)* |
Max Input per Channel (16 ch off-air) ......... |
+25 dBmV (Note 2)** |
Max Input Reverse Amp ....................... |
n/a |
Gain ....................................................... |
15 dB |
Gain Control .......................................... |
n/a |
Reverse Gain ........................................ |
-2 dB |
Noise Figure .......................................... |
3 dB |
FM Trap ................................................. |
n/a |
Operating Temp .................................... |
-30° to 140° F |
Power Supply Voltage .......................... |
12VDC - 200 mA |
Housing Dimensions ............................. |
4.90” W x 3.92” H x 1.5” D |
Weight ................................................... |
0.6 lbs. |
Power |
RF |
Jack |
Input |
HDA-100 |
|
|
|
15 dB Gain |
RF |
|
|
54-1000 MHz |
Output |
|
|
-2 dB 2-Way Bi-pass |
|
|
|
|
|
|
|
|
|
Power |
RF |
|
|
Jack |
Input |
HDA-200
24 dB Gain
54-1000 MHz
Variable gain Control 0-18 dB Switchable FM trap
+12 dB gain on 2-Way Bi-pass
HDA-200 SPECIFICATIONS
HDA-200
Bandpass Forward ............................. |
54-1000 MHz |
Bandpass Reverse ............................. |
5-42 MHz |
Max Output per Channel (80 ch CATV) ... |
+25 dBmV (Note 1)* |
Max Output per Channel (16 ch off-air) .... |
+40 dBmV (Note 2)** |
Max Input per Channel (80 ch CATV) ...... |
+8 dBmV (Note 1)* |
Max Input per Channel (16 ch off-air) ....... |
+23 dBmV (Note 2)** |
Max Input Reverse Amp ....................... |
+23 dBmV (at 1dB comp) |
Gain ..................................................... |
24 dB |
Gain Control ........................................ |
0-18 dB |
Reverse Gain ...................................... |
+12 dB |
Noise Figure ........................................ |
4.5 dB (at max gain) |
FM Trap ............................................... |
-20 dB (95-108 MHz) |
Operating Temp .................................. |
-30° to 140° F |
Power Supply Voltage ........................ |
12VDC - 200 mA |
Housing Dimensions ........................... |
4.90” W x 3.92” H x 1.5” D |
Weight ................................................. |
0.6 lbs. |
*Note (1) at -62dB ctb, -56dB cso **Note (2) at -46dB cross modulation