Windsor S28, QQS34, S34, QQS28, S34SP User Manual

...
0 (0)

OWNER’S GUIDE

Operating Instructions (GB/USA)

Instrucciones de Manejo (ESP)

Mode d’emploi (FR)

Bedienungsanweisung (GER)

Mode de Emploi (ITA)

MODELS COVERED IN THIS GUIDE:

SABER

MODEL TYPE POWER SOURCE

S28

28” Disc

36V Battery

S34

34” Disc

36V Battery

S34SP

34” Cylindrical Head

36V Battery

STRIDE II

MODEL

TYPE

POWER SOURCE

QQS28

28” Disc

36V Battery

QQS34

34” Disc

36V Battery

QQS34SP

34” Cylindrical Head

36V Battery

IPX4

Read these instructions before operating the machine

Antes de usar la máquina lea atentamente el libro de instrucciones

Lire attentivement le mode d’emploi avant la mise en service de la machine

Vor Inbetriebnahme der Maschine Bedienungsanweisung lesen

REV.

Y

Leggere queste istruzioni prima di usare la macchina

SABER/STRIDE II 28/34 98570 8/31/99

MACHINE DATA LOG

MODEL

DATE OF PURCHASE

SERIAL NUMBER

SALES REPRESENTATIVE #

DEALER NAME

OPERATIONS GUIDE NUMBER

PUBLISHED

Copyright 1995 Windsor Industries, Printed in USA

YOUR DEALER

Name:

Address:

Phone Number:

For the name and address of your dealer contact: Windsor Ind.

OVERVIEW

The SABER/STRIDE II is a battery powered, self propelled, hard floor scrubber intended for commercial use. This appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes, and then vacuums the soiled water back into the recovery tank.

USING THIS MANUAL

This Owner’s Guide has two parts: The first section of the manual is to familiarize the operator with the operation and functions of the machine. The second, has to do with normal owner maintenance.

SABER/STRIDE II 28/34 98570 5/1/98

2

TABLE OF CONTENTS

OPERATIONS

 

Machine Data Log . . . . . . . . . . . . . . . . . . . . . . . .

2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . .

3

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Technical Specifications . . . . . . . . . . . . . . . . . . . . 5

Operation Controls . . . . . . . . . . . . . . . . . . . . . . . . 6

Machine Operation . . . . . . . . . . . . . . . . . . . . . . . .

7

MAINTENANCE

Scrub Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Scrub Deck Skirt

/Squeegee Blades . . . . . . . . . . . . . . . . . . . . . . . . 10

Adjusting Squeegee . . . . . . . . . . . . . . . . . . . . . . . 11

Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Service Schedule. . . . . . . . . . . . . . . . . . . . . . . . . . 14

Squeege Blade/Brush Head Options. . . . . . . . . . . 15

Service Location Details . . . . . . . . . . . . . . . . . . . . 16

PARTS LIST

Main Frame Assembly. . . . . . . . . . . . . . . . . . . . . . 18

Brake/Squeegee Lift Assemblies. . . . . . . . . . . . . . 20

Rear Panel Mechanical . . . . . . . . . . . . . . . . . . . . . 22

Control Panel Cover . . . . . . . . . . . . . . . . . . . . . . . 24

Electrical Panel Assembly . . . . . . . . . . . . . . . . . . . 26

Recovery Tank Assembly . . . . . . . . . . . . . . . . . . . 28

Solution Tank Assembly . . . . . . . . . . . . . . . . . . . . 30

Squeegee Assembly . . . . . . . . . . . . . . . . . . . . . . . 32

Brush/Deck Lift Assembly . . . . . . . . . . . . . . . . . . . 34

Scrub Head Assembly . . . . . . . . . . . . . . . . . . . . . . 36

Cylindrical Head Assembly . . . . . . . . . . . . . . . . . . 38

Hopper Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 40

Automatic Squeegee Lift . . . . . . . . . . . . . . . . . . . . 42

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

SABER/STRIDE II 28/34 98570 10/08/98

3

SAFETY

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

! WARNING

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

! CAUTION

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

For SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

Before use all covers and doors shall be put in the

positions specified on the instructions

WHEN USING MACHINE:

Use caution when backing machine.

Do not carry riders on the machine.

During operation attention shall be paid to other persons, especially children.

Always follow basic safety and traffic rules.

Go slow on slippery surfaces and grades.

When leaving unattended, secure against unintentional movement.

BEFORE LEAVING OR SERVICING MACHINE:

Stop on a level surface.

Set the parking brake.

Turn off the machine.

Remove key from switch.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine.

Block machine tires before jacking machine up.

Use hoist or jack of adequate capacity to lift machine.

Disconnect battery connections before working on machine.

Avoid contact with battery acid.

Use Windsor supplied replacement parts.

! CAUTION

This machine is not suitable for picking up health endangering or hazardous dust.

! WARNING

This appliance has been designed for use with the brushes specified by the manufacturer. The fitting of other brushes may affect its safety.

! WARNING

Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away. Keep covers open when charging.

! WARNING

Flammable Materials Or Reactive Metals Can Cause explosion or fire. Do Not Pick Up These Materials.

! WARNING

Hazardous Voltage. Shock can result. Disconnect batteries before working on machine. Only qualified personnel should work inside machine.

! WARNING

Machine can emit excessive noise. Consult with your regulatory agency for exposure limits. Hearing loss can result. Wear hearing protection.

SABER/STRIDE II 28/34 98570 7/14/98

4

MODEL:SABER/STRIDE II 28/34

Year of Construction: 1998

Nominal Power:

2.88 kW

Mass:

850kg

Rated Voltage:

36VDC

Rated Amperage:

80 amps

Cleaning Path:

28” (2 x 14”) S28, QQS28

 

34” (2 x 17”) S34, QQS34

 

34” (CYL) S34SP, QQS34SP

Drive Motor:

.5 hp

Brush Motor:

.75 hp

Brush Pressure:

0-200 lbs.

Brush Speed:

200 rpm

TECHNICAL SPECIFICATIONS

Solution Tank:

33 gal.

Recovery Tank:

33 gal.

Electrical System:

36 volt, 6 x 6 volt 250-350 A/H

Tires:

12” pneumatic

Dimensions: (LxWxH)

69” x 36” x 45”

Special NOTES:

The sound pressure level at the operator’s ear was measured to be 74 dBA. This was a nearfield, broad-band measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source of impact noise. The instaneous sound pressure level is below 63 Pa.

The weighted root mean square acceleration at the operator’s arms was measured to be below 2.5 m/s. This was a tri-axial, third-octive-band measurement made during normal operation on a composite tile floor. The measurement and related calculations were made in accordance with ANSI S3.34-1986.

Solution Control: Gravity feed, fully variable with automatic shut-off in neutral.

View: Side view of machine

45”

69”

SABER/STRIDE II 28/34 98570 5/1/98

5

Windsor S28, QQS34, S34, QQS28, S34SP User Manual

OPERATION CONTROLS

1.Squeegee /Vacuum Switches. Turns on and off the vacuum and squeegee system seperately if desired.

2.Brush Pressure Indicator/Switch. Sets brush pressure on floor with LED’s to show pressure level.

3.One Touch Switch. Activates scrubbing and vacuuming functions. Pressing once turns “ON”. Pressing twice turns “OFF” scrubbing and vacuuming functions.

4.Key Switch. Turns ON and OFF the machine.

5.Emergency Stop Switch. Cuts off power to the machine.

6.Speed Control Lever. Controls the machines overall speed.

7.Direction Control Lever. Simply push the lever forward or pull the lever toward you to move the machine in the direction you choose.

8.Height Adjustment Handle. Adjusts the height of the handle and rear panel.

9.Solution Control Lever. Pulling lever up turns solution flow off to scrub deck. Pushing down increases solution flow to scrub deck.

10.Traction Motor Circuit Breaker. 25 Amp. Protects the traction drive electrical system.

11.Vac Motor Circuit Breaker. 25 Amp. Protects vac motor from damage.

12.Brush Motor Circuit Breaker (Right brush). 30 Amp. Protects brush motor system.

13.Brush Motor Circuit Breaker (Left brush). 30 Amp. Protects brush motor system.

14.Actuator Motor Circuit Breaker. 3 Amp. Protects actuator lifting system.

15.Squeegee Lift Lever. Raises and lowers the squeegee.

16.Recovery Tank Full Indicator.

17.Recovery Tank Drain Hose.

18.Brush Circuit Breaker Indicator.

19.Solution Tank Drain Hose.

20.Hour Meter. Tracks operating hours and is helpful for scheduling service.

21.Battery Charge Level Indicator. Displays the existing power level of the battery.

 

DETAIL: Touch pad control panel

 

21

16

18

2

20

 

 

5

 

 

 

 

 

 

 

 

VIEW: Rear view of machine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 hr

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

13

12

 

 

 

 

9

 

 

 

 

 

 

 

 

1

3

4

 

 

 

 

6

14

 

15

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

17

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

19

 

 

 

11

SABER/STRIDE II 28/34 98570 5/1/98

6

Loading...
+ 11 hidden pages