Williams Sound PPA R1600 User Manual

Size:
505.92 Kb
Download

R1600 PPA Model Speaker Remote FM

FM Remote Speaker • Model PPA R1600

Description:

The FM Remote Speaker, model PPA R1600, allows a group of people to listen to the FM broadcast in a cry room, nursery, office area, or any location where a remote speaker is needed and wiring is difficult to run. The R1600 features 16 selectable channels on 72-76MHz, mic andline-levelinputs, and will operate up to 1000 ft (304.8 m) when used with the Williams Sound T35 transmitter

Applications:

Houses of Worship • Conferences • Auditoriums • Music Applications

PPA R1600 Remote Speaker:

Dimensions:

12.4"H x 7.1"W x 7.5"D (315mm x 180mm x 190mm)

 

Color:

Black with white legends

 

Weight:

9.4lb (4.3kg) approx. with SLD 072 receiver

 

Rated Power:

20 watts continuous

 

 

Frequency Response:

65Hz – 7kHz

 

 

Max SPL @ rated output:

101dB @ 1 meter

 

 

Woofer:

5.25" (133.35mm) high efficiency magnetically shielded

 

Tweeter:

1" (25mm) dome

 

 

Crossover:

1st order passive @ 8kHz

 

Tone Control:

-6dB/octavesliding lowpass (3kHz to 8kHz)

 

Wireless inputs

CHANNEL A:

SLD 072 FM Receiver, 72-76MHz*

 

 

Operating Freq:

72.1, 72.3, 72.6, 72.8, 74.7, 75.4, 75.7, 75.9, 72.5,

 

 

 

72.2, 72.4, 72.7, 72.9, 75.3, 75.6, 75.8 MHz.

 

 

Intermediate Freq:

10.7 MHz

 

 

FM Deviation:

± 75 kHz max

 

 

Sensitivity:

2 uV at 12 dB SINAD with squelch defeated

 

 

Input Overload:

20 mV

 

 

Frequency Response:

65 Hz to 7 kHz ± 3 dB

PPA R1600 Front View

 

Signal to Noise ratio:

60 dB at 100 uV

 

 

 

Antenna connector:

Thread mount for ANT 028 telescoping

 

 

 

antenna. 75 ohms.

 

 

CHANNEL B:

Empty slot for additional receiver sled

 

Wired inputs/output

 

 

 

Mic:

-81dBV(0.089mVRMS) for 1 watt 100KΩunbalanced, 1/4 " phone

 

 

jack, variable

 

 

Line:

-40dBV(10mVRMS) for 1 watt 10KΩunbalanced, RCA jack, variable

 

Line-Out:

+15dBV max - RCA jack

 

AC Power Requirements:

User switchable

 

 

 

110-125 /210-240VAC- 50Hz / 60Hz

 

Approvals:

UL, C-UL,FCC, RoHS, WEEE

 

Included w/speaker:

Removable wall-mountbracket with 2 screws and rubber anti-

 

 

rotate pads, removable right-angleAC cord, 4self-adhesiveanti-

 

 

skid pads, 4 module

screws, 1 noise-cancelingcircuit boards per

 

 

receiver sled installed

 

 

*DISCLAIMER: FCC RULES LIMIT USE OF THIS EQUIPMENT TO AUDITORY ASSISTANCE FOR THE HANDICAPPED.

NOTE: SPECIFICATIONS SUBJECT TO

WITHOUT NOTICE!

PPA R1600 Back View

 

 

 

 

 

 

 

©2007, Williams Sound Corp. MCAT 060C

1

 

 

R1600 PPA Model Speaker Remote FM

FM Remote Speaker • Model PPA R1600

Bid Specs:

PPA R1600

The Williams Sound Corp.

shall be a powered speaker and have a sixteen channel wideband

72-76MHz receiver that can

on the back of the unit. It shall be housed in a black heavy

duty plastic enclosure 12.4”

x 5.6” and weigh approximately 9 lbs.

The R1600 shall have a 20

and two way speaker system with a 5.25” magnetically shield-

ed woofer and a 1” dome tweeter.

The R1600 shall have an RCA

input, RCA line output and 1/4” low impedance microphone input. It

shall have separate microphone

line in level adjust and have a master tone and volume rotary

adjust.

 

The receiver sled shall have

Ohm antenna output, on/off audio level rotary adjust, RF rotary

squelch adjust and sixteen position rotary channel selector. The R1600 shall be supplied with a 39 inch telescopic antenna.

The R1600 shall be supplied

a wall mount bracket and have the ability to be mounted on a micro-

phone stand (not supplied)

 

It shall be AC powered and

230 - 115VAC switch on the back and be UL, C-UL,FCC, RoHS, and

WEEE compliant.

 

The R1600 shall have a five

and be called the Williams Sound Corp. PPA R1600.

SLD 072

 

The SLD 072 receiver sled

a sixteen channel wide band 72-76MHz receiver designed specifically to

work with the PPA R1600 powered speaker/receiver. It shall be enclosed in a metal housing 5” x 5” x 1” and weigh 0.62 lb.

It shall have a sixteen channel

channel select, rotary on/off audio level control, rotary squelch con-

trol, a 75 Ω F-connectantenna

and an RF LED indicator showing when the receiver is receiving an

FM signal.

 

The SLD 072 is designed to

the back of the PPA R1600 and shall be locked in place by two

thumb screws on the face

 

The SLD 072 shall have a deviation of ±75 kHz, frequency response 40 - 15 kHz and S/N ratio of 60 dB when used with the PPA T35

The SLD 072 shall be FCC,

WEEE compliant.

The receiver shall have a five

warranty and be called the Williams Sound Corp. SLD 072.

*90 days on accessories.

NOTE: SPECIFICATIONS SUBJECT TO

WITHOUT NOTICE!

 

 

 

 

©2008, Williams Sound Corp. MCAT 060C

2

 

 

R1600 PPA Model Speaker Remote FM

FM Remote Speaker • Model PPA R1600

Contact:

United States

Williams Sound Corp.

10321 W. 70th Street Eden Prairie, MN 55344

Ph: 800-328-6190 /952-943-2252FAX:952-943-2174

Email: info@williamssound.com Web: www.williamssound.com

Canada

Thorvin Electronics

2861 Sherwood Heights Dr. Units 36-37Oakville, ONL6J-7K1Canada

Ph: 800-323-6634 /905-829-3040FAX:905-829-4196

Web: www.thorvinelectronics.com

Asia, Australia, Latin America, Middle East, South Africa

International Sales Department Williams Sound Corp.

10321 W. 70th Street

Eden Prairie, MN 55344 USA Phone: +1 952 224 7791 Fax: +1 952 943 2174

Email: info@williamssound.com Web: www.williamssound.com

NOTE: SPECIFICATIONS SUBJECT TO

WITHOUT NOTICE!

 

 

 

 

©2008, Williams Sound Corp. MCAT 060C

3