Williams Sound IC-1 User Manual

Size:
126.1 Kb
Download

Interpreter’s Control Center, Model IC-1

Description:

This self-containedaudio control center lets interpreters listen to the program directly from the floor or another interpreter while simultaneously interpreting into a microphone. Used as astand-aloneunit, theIC–1is capable of handling dual language applications. Used in tandem, multipleIC-1smay be combined to economically handle up to four languages.

Interpreter Control Center, Model IC-1:

Dimensions, Weight:

7" (17.7 cm) W x 5.625" (14.3 cm) D x 3.125" (9.3 cm) H, 1.82 lbs (.83 kg)

Color:

Beige epoxy paint with black legends, blue bottom and side panels

Power:

External power supply, 12 VAC, 50 or 60 Hz, 10 VA, (TFP 008 Power Supply)

 

(A 240 VAC Power Supply is also available, TFP 008 HV)

INPUTS

 

Floor In, Relay In:

3-PinXLR female jack, balanced or unbalancedline-level,max. 3.8 Vrms,

 

Gain 6 dB, 43 kΩ input impedance

1/4" Microphone Inputs:

Left and right, 1/4" TRS phone jack, balanced or unbalanced mic-level,

 

max. 70 mVrms, gain 46 dB, supplies simplex DC power for electret mics,

1.75kΩ input impedance

3.5mm Microphone Inputs: Left and right, 3.5 mm TRS phone jack, unbalanced (T,S) for condenser mics,

max. 70 mVrms, gain 46 dB, supplies DC power on tip, 1.75 kΩ input impedance

OUTPUTS

 

Key Out, Norm Out:

3-PinXLR male jack, balanced or unbalancedline-level,7.7 max. Vrms,

 

56 Ω source impedance

Phones:

3.5 mm TRS phone jack, mono or stereo headphone, 8-32Ω ,

 

63.7 mW at 8 Ω load max

CONTROLS

 

Volume:

Left and right, rotary, controls headphones volume

Mic Switch:

3–waytoggle. Selects left mic, right mic, or both.

Mute Switch:

Push button. Mutes left and right mics when depressed.

Function Switch:

4-waypush button. Selects OFF, NORM, RELAY, or KEY modes.

OFF Mode:

Floor input (FLOOR IN) is fed to the interpreter’s headphones to allow monitoring of the meeting.

 

Interpreter’s microphones are muted.

NORM Mode:

Floor input (FLOOR IN) is fed to the interpreter’s headphones. The selected interpreter’s microphone

 

is fed to the normal output (NORM OUT).

RELAY Mode:

Interpreter monitors the relay input (RELAY IN) while the selected microphone feeds the normal output (NORM OUT)

KEY Mode:

Used to feed a second language audience. The interpreters monitor the floor input (FLOOR IN)

 

while mics feed the key output (KEY OUT).

Feedthru Jumpers:

Located on bottom of cabinet. Used to select floor signal feedthru options.

J1

Feeds the floor signal to the normal output (NORM OUT)

J2

Feeds the floor signal to the key output (RELAY OUT)

Recommended Microphone

 

MIC 079

Dual headphone, condenser mic, 3.5 mm plug (MIC 079), Audio Indicator Light: Yellow LED,

 

flashes when audio signal is present

ON Indicator Light:

Green LED, glows when power is applied to the transmitter. There is no on/off switch.

 

The T17 is designed to be left on continuously.

Warranty:

3 years, parts and labor*

*90 day warranty on accessories

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

Williams Sound ¨

©2005, Williams Sound Corp. CAT 063C

Helping People Hear

1

Interpreter’s Control Center, Model IC-1

 

IC-1Interpreter's Control Center

Microphone

 

 

Microphone

 

 

 

 

 

 

 

 

Left

Right

 

 

Mic Phones

L

R Phones Mic

 

 

 

 

 

 

 

 

 

 

 

 

L+R

 

 

 

 

 

 

 

Off

Norm Relay

Key

 

 

 

 

 

 

 

 

 

 

 

IC–1Front Panel

 

Left Volume

 

 

Right Volume

 

 

 

 

2

3

 

 

2

3

Interpreter's Control Center

4

 

 

4

 

 

 

 

 

 

1

5

 

 

1

5

 

Model IC-1

 

0

6

Microphone

0

6

 

 

 

 

 

Mute

 

 

 

 

 

 

 

 

 

Floor In

Norm Out

 

Key Out

Relay In

 

 

 

 

 

 

 

 

Power

 

 

 

 

 

 

 

 

 

12 VAC

 

 

 

 

 

Williams Sound ®

 

 

 

 

 

 

 

 

 

Williams Sound Corp.

 

 

Made in U.S.A.

IC–1Top Panel

IC–1Rear Panel

TX9 Emitter

Baseband Input

Podium (Floor)

 

Baseband

 

MOD 232 Modulator

 

 

 

MOD 232 Modulator

Mixer

Output

 

Coaxial

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Two Channel Infrared System Modulator

 

4

5

6

 

 

 

Williams Sound

Two Channel Infrared System Modulator

 

4

5

6

 

 

 

Williams Sound

 

 

4

5 6

+3

3.3

Compress

+3

3.3

Compress

Phones

Cable

 

4

5 6

+3

3.3

Compress

+3

3.3

Compress

Phones

 

Microprocessor Controlled

 

++

69

3.8

 

 

 

 

+9

3.8

 

Inputs Mixed

 

Microprocessor Controlled

 

+9

3.8

 

 

 

 

+9

3.8

 

Inputs Mixed

 

Frequency Synthesized

 

 

 

 

 

 

+6

 

 

Frequency Synthesized

 

 

+6

 

 

 

 

+6

 

 

 

3

7

--

0

 

 

3

 

7

0

 

 

Stereo

 

 

3

7

0

 

 

3

 

7

0

 

 

Stereo

 

Power

2

8

63

2.8

 

2

 

8

--63

2.8

 

 

 

Power

2

8

--63

2.8

 

2

 

8

--63

2.8

 

 

 

-9

2.3

 

 

-9

2.3

 

CH A

 

- 9

2.3

 

 

-9

2.3

 

CH A

 

 

1

9

-12

Frequency

 

1

 

9

-12

Frequency

 

IR

 

 

1

9

- 12

Frequency

 

1

 

9

-12

Frequency

 

IR

 

 

0

10

--

1815

(MHz)

 

0

 

10

--1815

(MHz)

 

 

 

 

0

10

--1815

(MHz)

 

0

 

10

--1815

(MHz)

 

 

 

 

 

Level

 

 

 

 

 

Level

 

 

 

CH B

 

 

 

Level

 

 

 

 

Level

 

 

 

CH B

 

 

 

 

Channel A

 

 

 

 

 

Channel B

 

 

 

 

 

 

 

Channel A

 

 

 

 

 

Channel B

 

 

 

Input CHA

Input CHB

Input CHA

Input CHB

Distribution

Norm Out

 

 

 

 

 

 

 

 

Amp

 

 

 

 

 

 

 

 

 

IC-1Interpreter's Control Center

 

 

 

 

 

 

 

 

Floor In

 

 

 

 

 

 

 

 

 

 

Left Volume

 

Right Volume

 

 

 

 

 

 

 

 

 

Microphone

 

 

 

 

 

 

 

 

 

 

Mute

 

 

 

 

 

 

 

 

 

 

 

Williams Sound

Norm Out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mic

IC-1

 

IC-1Interpreter's Control Center

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Floor In

 

 

 

 

 

 

 

 

 

 

Left Volume

Right Volume

 

 

 

 

 

 

 

 

 

 

Microphone

 

 

 

 

 

 

 

 

 

 

Mute

Norm Out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Williams Sound

 

 

 

 

 

 

 

 

 

Mic

 

IC-1Interpreter's Control Center

 

 

 

 

 

 

 

IC-1

Floor In

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Left Volume

Right Volume

 

 

 

 

 

 

 

 

 

 

Microphone

 

 

 

 

 

 

 

 

 

 

Mute

 

 

 

 

 

 

 

 

 

 

Williams Sound

Norm Out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mic

IC-1

 

IC-1Interpreter's Control Center

 

 

 

 

 

 

 

Floor In

Left Volume

Right Volume

 

 

 

 

 

 

 

 

 

Microphone

 

 

 

 

 

 

 

 

 

 

Mute

 

 

 

 

 

 

 

 

 

 

 

Williams Sound

 

 

 

 

 

 

 

Mic

IC-1

 

 

 

 

 

 

 

 

 

 

 

IR

IR

RX12-4Receiver

Interpreter

Interpreter

Interpreter

Interpreter

#1

#2

#3

#4

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

Williams Sound ¨

©2005, Williams Sound Corp. CAT 063C Helping People Hear 2

Interpreter’s Control Center, Model IC-1

Bid Specs

The unit shall be 7 inches wide, 5 5⁄8 inches deep and 3 1⁄ 8 inches tall. The unit shall weigh 1.82 lbs. The module shall be painted beige with black legends indicating controls, inputs and outputs.The bottom and side panels shall be painted blue.The power supply shall be external, 12 VAC, 50 or 60 Hz, 10 VA. An optional 240 VAC Power Supply shall also be available. Inputs shall be configured as follows:The “Floor In” and “Key In” inputs shall be 3-Pin,XLR female jacks, allowing balanced or unbalancedline-levelinputs. Maximum input levels shall be 3.8 Vrms. Gain shall be 6 dB with 43 kΩ input impedance.There shall be two microphone inputs, both 1⁄ 4" TRS phone jacks, balanced or unbalanced. These inputs shall bemic-level,allowing a maximum 70 mVrms and 46 dB gain. The two microphone inputs shall supply simplex DC power for electret mics with 1.75 kΩ input impedance. There shall be two independent 3.5 mm TRS microphone inputs (unbalanced [T,S] for condenser mics), allowing a maximum 70 mVrms. Gain shall be 46 dB.The two 3.5 mm inputs shall supply DC power on tip, 1.75 kΩ input impedance.

Outputs

The “Key Out” and “Norm Out” outputs shall be 3-PinXLR male jacks, balanced or unbalancedline-level.Maximum output shall be 7.7 Vrms. Source impedance shall be 56 Ω .There shall be two independent 3.5 mm TRS headphone output jacks (left right). The headphone outputs shall allow the use of either mono or stereo headphones,8-32Ω . Maximum power shall be 63 mW at 8 Ω .

Controls

The unit shall have two, independent rotary-typevolume controls, controlling headphone volume. The “Microphone” switch shall be a3–waytoggle type, selecting left mic, right mic or both. The mute switch shall be a pushbutton-type,muting left and right mics when depressed.The function switch shall be a4-waypush buttontype, selecting OFF, NORM, RELAY or KEY modes.

Controls

Feedthru jumpers used to select floor signal feedthru options shall be located on bottom of cabinet.The unit shall be Williams Sound Corp. Interpreter Control Center, model IC-1.

NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!

Williams Sound ¨

©2005, Williams Sound Corp. CAT 063C

Helping People Hear

3

Interpreter’s Control Center, Model IC-1

Contact:

United States and Mexico

Williams Sound Corp.

10321 W. 70th Street

Eden Prairie, MN 55344-3446

Ph: 800-328-6190 /952-943-2252 /FAX:952-943-2174Web: www.williamssound.com

Email: info@williamssound.com

Canada

Thorvin Electronics

2861 Sherwood Heights Dr. Units 36-37Oakville, ONL6J-7K1Canada

Ph: 800-323-6634 /905-829-3040 /FAX:905-829-4196Web: www.thorvinelectronics.com

South America

DPTech

SIATrecho 3/4 Lote 335 2°. Andar 71200-030Brasília, DF

BRAZIL

Ph: (5561) 361-1384

Fax: (5561) 361-0948Web: www.dptech.com.br Email: ws@dptech.com.br

Europe and Asia

International Sales Department Williams Sound Corp.

10321 W. 70th Street

Eden Prairie, MN 55344 USA Phone: +1 952 943 2252

Fax: +1 952 943 2174

Email: doreeni@williamssound.com Web: www.williamssound.com

Williams Sound ¨

©2005, Williams Sound Corp. CAT 063C

Helping People Hear

4